Details, datasheet, quote on part number: TPS3837K33DBVT
PartTPS3837K33DBVT
CategorySemiconductors => Power Management => Supervisor and Reset IC
Part familyTPS3837 NanoPower Supervisory Circuits
TitlePower
DescriptionNanoPower Supervisory Circuits 5-SOT-23 -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload TPS3837K33DBVT datasheet
Quote
Find where to buy
 
Specifications 
Operating Temperature Range(C)-40 to 85
Package GroupSOT-23
RatingCatalog
Time Delay(ms)10,200
Monitored Voltage 1 (typ)(Nom)(V)1.8,2.5,3,3.3
Threshold Voltage 1(Typ)(V)1.71,2.25,2.64,2.93
# of Supplies Monitored1
Iq(Typ)(uA)0.22
Approx. Price (US$)0.85 | 1ku
Reset Threshold Accuracy(%)1.75
Watchdog Timer WDI(sec)None
VCC(Max)(V)6
VCC(Min)(V)1.6
Output Driver Type / Reset OutputActive-high,Push-pull
Monitored Voltage 2 (typ)(Nom)(V)N/A
Threshold Voltage 2 (typ)(Typ)(V)N/A
FeaturesActive Low Enable,Manual Reset
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
5DBVSOT-23R-PDSO-G250SMALL T&RPDUI 1.62.91.2.95

 

Features, Applications

D Supply Current 220 nA (Typ) D Precision Supply Voltage Supervision

Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430

Delay Time 200 ms Push/Pull RESET Output (TPS3836), RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset 5-Pin SOT-23 Package Temperature Range to 85C

description

The TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT.

When CT is connected to GND a fixed delay time of typical ms is asserted. When connected to VDD the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and TPS3838 integrates an active-low open-drain RESET output.

TYPICAL OPERATING CIRCUIT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The product spectrum is designed for supply voltages 3 V, and 3.3 V. The circuits are available 5-pin SOT-23 package. The TPS3837, TPS3838 families are characterized for operation over a temperature range to 85C.

PACKAGE INFORMATION TA DEVICE NAME TPS3838L30DBVT TPS3838K33DBVT THRESHOLD VOLTAGE 2.93 V SYMBOL PDNI PDSI PHRI PCAI PDTI PDOI PDRI PCBI PDUI PDQI PDPI PCCI PDVI

The DBVR passive indicates tape and reel of 3000 parts. The DBVT passive indicates tape and reel of 250 parts. ORDERING INFORMATION

Reel Package Nominal Supply Voltage Typical Reset Threshold Voltage Functionality Family

 

Related products with the same datasheet
TPS3837K33DBVR
TPS3837K33DBVRG4
TPS3837K33DBVTG4
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3837L30
TPS3838E18
TPS3838H30 Nanopower Supervisory Circuits
TPS3838J25
TPS3838K33
TPS3838L30
TPS40000 Low Input Voltage Mode Synchronous Buck Controller
TPS40001
TPS40002
TPS40003
TPS40004 Synchronous Buck DC/DC Controller
TPS40005
TPS40007 Low Input Synchronous Buck Controller
TPS40009
TPS40020 Enhanced Low Input Voltage (2.25V-5.5V) Buck<<<>>>dc-to-dc Controllers Are Designed For Non-isolated Synchronous Buck Regulators, Providing Enhanced Operation And Design Flexability Through User Programmability.<<<>>>features<<<>>>operating
TPS40021
TPS40050 Q1 - Automotive Catalog Wide-input Synchronous Buck Controller
TPS40051
TPS40052 SYNCH Buck DC/DC Control W/ddr Tracking
TPS40053 Q1 - Automotive Catalog Wide-input Synchronous Buck Controller
TPS40054 Wide Input Synchronous Buck Controller

CDCV857ADGG : PLL-Based Clock Buffers (Zero-Delay) ti CDCV857A, 2.5V Sstl-ii Phase Lock Loop Clock Driver For Double Data-rate Synchronous DRAM Applications

JM38510/05554BEA : Non-Inverting Buffers and Drivers ti CD4050B, CMOS Hex Non-inverting Buffer/converter

SN54S253FK : Dual 4-line to 1-line Data Selectors/multiplexers With 3-state Outputs

SN7495A : 4-bit Parallel-access Shift Registers

TLC7705QPWR : ti TLC7705, Single Power SVS (5v) W/pgmmable Time Delay & Push-pull Outputs

TPS79601KTT : Ultra-low Noise, High Psrr, Fast RF, High-Enable, 1A Low Dropout Regulator

UC5601 : Scsi Active Terminator

TPS79925YZUT : 200ma Low Quiescent Current, Ultra-low Noise, High Psrr, Low Dropout Linear Regulator

CD74HC238PWRG4 : High-speed CMOS Logic 8-bit Universal Shift Register; Three-state

TMDSMCD5505 : 3.3V Memory Daughter Card for C5505 EVM Specifications: Silicon Manufacturer: Texas Instruments ; Core Architecture: C5000 ; Core Sub-Architecture: TMS320C55x ; Silicon Core Number: TMS320VC ; Silicon Family Name: TMS320VC5xxx ; For Use With: TMS320VC5505 DSP ; Kit Contents: Board ; Features: Expansion Connectors, 4GB Micron Flash Memory

DRV2625YFFT : Motor/Motion/Ignition Controllers & Drivers Advanced ERM & LRA Haptics Driver with Smart Loop and Embedded Effects Library 9-DSBGA -40 to 85 Texas Instruments DRV2625 Advanced ERM/LRA Haptics Driver relies on a proprietary closed-loop architecture to deliver sharp, strong, and consistent haptic effects while optimizing power consumption. The device include internal library and loopable waveform sequencer, automatic overdrive and braki

 
0-C     D-L     M-R     S-Z