Details, datasheet, quote on part number: TPS3838J25DBVT
PartTPS3838J25DBVT
CategorySemiconductors => Power Management => Supervisor and Reset IC
Part familyTPS3838 NanoPower Supervisory Circuits
TitlePower
DescriptionNanoPower Supervisory Circuits 5-SOT-23 -40 to 85
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload TPS3838J25DBVT datasheet
Quote
Find where to buy
 
Specifications 
Output Driver Type / Reset OutputActive-low,Open-drain
Operating Temperature Range(C)-40 to 85
RatingCatalog
Time Delay(ms)10,200
Monitored Voltage 1 (typ)(Nom)(V)1.8,2.5,3,3.3
Threshold Voltage 1(Typ)(V)1.71,2.25,2.64,2.93
# of Supplies Monitored1
Iq(Typ)(uA)0.22
Approx. Price (US$)0.85 | 1ku
Reset Threshold Accuracy(%)1.75
Watchdog Timer WDI(sec)None
VCC(Max)(V)6
Package GroupSOT-23,WSON
VCC(Min)(V)1.6
Monitored Voltage 2 (typ)(Nom)(V)N/A
Threshold Voltage 2 (typ)(Typ)(V)N/A
FeaturesActive Low Enable,Manual Reset
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
5DBVSOT-23R-PDSO-G250SMALL T&RPDPI 1.62.91.2.95
Application notes
• Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs | Doc

 

Features, Applications

D Supply Current 220 nA (Typ) D Precision Supply Voltage Supervision

Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors Portable/Battery-Powered Equipment Intelligent Instruments Wireless Communication Systems Notebook Computers Automotive Systems Applications Using the MSP430

Delay Time 200 ms Push/Pull RESET Output (TPS3836), RESET Output (TPS3837), or Open-Drain RESET Output (TPS3838) Manual Reset 5-Pin SOT-23 Package Temperature Range to 85C

description

The TPS3837, TPS3838 families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET output active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDD has risen above the threshold voltage VIT.

When CT is connected to GND a fixed delay time of typical ms is asserted. When connected to VDD the delay time is typically 200 ms. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider. The TPS3836 has an active-low push-pull RESET output. The TPS3837 has active-high push-pull RESET, and TPS3838 integrates an active-low open-drain RESET output.

TYPICAL OPERATING CIRCUIT Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The product spectrum is designed for supply voltages 3 V, and 3.3 V. The circuits are available 5-pin SOT-23 package. The TPS3837, TPS3838 families are characterized for operation over a temperature range to 85C.

PACKAGE INFORMATION TA DEVICE NAME TPS3838L30DBVT TPS3838K33DBVT THRESHOLD VOLTAGE 2.93 V SYMBOL PDNI PDSI PHRI PCAI PDTI PDOI PDRI PCBI PDUI PDQI PDPI PCCI PDVI

The DBVR passive indicates tape and reel of 3000 parts. The DBVT passive indicates tape and reel of 250 parts. ORDERING INFORMATION

Reel Package Nominal Supply Voltage Typical Reset Threshold Voltage Functionality Family

 

Related products with the same datasheet
TPS3838J25DBVR
TPS3838J25DBVRG4
TPS3838J25DBVTG4
Some Part number from the same manufacture Texas Instruments, Inc.
TPS3838K33
TPS3838L30
TPS40000 Low Input Voltage Mode Synchronous Buck Controller
TPS40001
TPS40002
TPS40003
TPS40004 Synchronous Buck DC/DC Controller
TPS40005
TPS40007 Low Input Synchronous Buck Controller
TPS40009
TPS40020 Enhanced Low Input Voltage (2.25V-5.5V) Buck<<<>>>dc-to-dc Controllers Are Designed For Non-isolated Synchronous Buck Regulators, Providing Enhanced Operation And Design Flexability Through User Programmability.<<<>>>features<<<>>>operating
TPS40021
TPS40050 Q1 - Automotive Catalog Wide-input Synchronous Buck Controller
TPS40051
TPS40052 SYNCH Buck DC/DC Control W/ddr Tracking
TPS40053 Q1 - Automotive Catalog Wide-input Synchronous Buck Controller
TPS40054 Wide Input Synchronous Buck Controller
TPS40055
TPS40057
TPS40060 Wide Input Voltage Synchronous Buck Controller
TPS40061

SN74ABT16823DGG : 18-bit Bus-interface Flip-flops With 3-state Outputs

SN74LS193D : ti SN74LS193, Synchronous 4-Bit Up/down Binary Counters With Dual Clock And Clear

TLV2217-33PW : Low-dropout 3.3-v Fixed-voltage Regulators

TPS72618KTT : Low Input Voltage, Any Cap, 1A Low Dropout Linear Regulator With Supervisor

TPS54377 : 1.6 MHz, 3V to 6V Input, 3A Syn. Step Down SWIFT Converter with Disabled Sinking During Start UP As a member of the SWIFT family of dc/dc regulators, the TPS54377 low-input-voltage high-output-current synchronous-buck PWM converter integrates all required active components. Included on the substra

SN74ALS645ADWRE4 : Standard Transceivers ti SN74ALS645A-1, Octal Bus Transceiver 3-STATE

OPA4170AIPWR : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tape & Reel (TR) 110A 2.7 V ~ 36 V, 1.35 V ~ 18 V; IC OPAMP GP RRO 1.2MHZ 14TSSOP Specifications: Packaging: Tape & Reel (TR) ; Amplifier Type: General Purpose ; Number of Circuits: 4 ; Package / Case: 14-TSSOP (0.173", 4.40mm Width) ; Slew Rate: 0.4 V/s ; Gain Bandwidth Product: 1.2MHz ; Current - Supply: 110A ; Current - Output / Channel: 20mA ; Voltage - Supply, Single/D

TL074ACNE4 : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) J-FET Tube 1.4mA 7 V ~ 36 V, 3.5 V ~ 18 V; IC OPAMP JFET 3MHZ QUAD 14DIP Specifications: Packaging: Tube ; Amplifier Type: J-FET ; Number of Circuits: 4 ; Package / Case: 14-DIP (0.300", 7.62mm) ; Slew Rate: 13 V/s ; Gain Bandwidth Product: 3MHz ; Current - Supply: 1.4mA ; Current - Output / Channel: - ; Voltage - Supply, Single/Dual (): 7 V ~ 36 V, 3.5 V ~ 18 V ; Out

CD40193BPWRG4 : ti CD40193B, CMOS Presettable Binary Up/down Counter (Dual Clock With Reset)

DS90LV047ATMTCX/NOPB : LINE DRIVER Specifications: Device Type: Line / Bus Driver

 
0-C     D-L     M-R     S-Z