|
Details, datasheet, quote on part number:TPS7301QPWR
| |
| Part: | TPS7301QPWR |
| Category: | Power Management => Regulators => Linear Regulators => LDO (Low Drop Out) |
| Description: | ti TPS7301, Lowest Dropout (LDO) PMOS Voltage Regulator With Integrated Supply Voltage Supervisor |
| Company: | Texas Instruments, Inc. |
| Datasheet: | Download TPS7301QPWR datasheet File size : 654 kB |
| Request For quote: | Find where to buy TPS7301QPWR
|
| |
Datasheet text preview:
TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION
SLVS124F JUNE 1995 REVISED JANUARY 1999
D D D D D D D D D
Available in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V Fixed-Output and Adjustable Versions Integrated Precision Supply-Voltage Supervisor Monitoring Regulator Output Voltage Active-Low Reset Signal with 200-ms Pulse Width Very Low Dropout Voltage . . . Maximum of 35 mV at IO = 100 mA (TPS7350) Low Quiescent Current Independent of Load . . . 340 µA Typ Extremely Low Sleep-State Current, 0.5 µA Max 2% Tolerance Over Full Range of Load, Line, and Temperature for Fixed-Output Versions§ Output Current Range of 0 mA to 500 mA TSSOP Package Option Offers Reduced Component Height For Critical Applications
D OR P PACKAGE (TOP VIEW)
GND EN IN IN
1 2 3 4
8 7 6 5
RESET SENSE/FB OUT OUT
PW PACKAGE (TOP VIEW)
GND GND GND NC NC EN NC IN IN IN
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
RESET NC NC FB NC SENSE OUT OUT NC NC
description
The TPS73xx devices are members of a family of micropower low-dropout (LDO) voltage regulators. They are differentiated from the TPS71xx and TPS72xx LDOs by their integrated delayed microprocessor-reset function. If the precision delayed reset is not required, the TPS71xx and TPS72xx should be considered.¶
AVAILABLE OPTIONS OUTPUT VOLTAGE (V) TJ MIN 4.9 4.75 to 40°C to 125°C 3.23 2.94 2.425 TYP 5 4.85 3.3 3 2.5 MAX 5.1 4.95 3.37 3.06 2.575 MIN 4.55 4.5 2.868 2.58 2.23 1.101 TYP 4.65 4.6 2.934 2.64 2.32 1.123 MAX 4.75 4.7 3 2.7 2.39 1.145 NEGATIVE-GOING RESET THRESHOLD VOLTAGE (V) SMALL OUTLINE (D) TPS7350QD TPS7348QD TPS7333QD TPS7330QD TPS7325QD TPS7301QD PACKAGED DEVICES PLASTIC DIP (P) TPS7350QP TPS7348QP TPS7333QP TPS7330QP TPS7325QP TPS7301QP TSSOP (PW) TPS7350QPW TPS7348QPW TPS7333QPW TPS7330QPW TPS7325QPW TPS7301QPW CHIP FORM FORM (Y)
NC No internal connection SENSE Fixed voltage options only (TPS7325, TPS7330, TPS7333, TPS7348, and TPS7350) FB Adjustable version only (TPS7301)
TPS7350Y TPS7348Y TPS7333Y TPS7330Y TPS7325Y TPS7301Y
Adjustable 1.2 V to 9.75 V
The D and PW packages are available taped and reeled. Add an R suffix to device type (e.g., TPS7350QDR). The TPS7301Q is programmable using an external resistor divider (see application information). The chip form is tested at 25°C. § The TPS7325 has a tolerance of ± 3% over the full temperature range. ¶ The TPS71xx and the TPS72xx are 500-mA and 250-mA output regulators respectively, offering performance similar to that of the TPS73xx but without the delayed-reset function. The TPS72xx devices are further differentiated by availability in 8-pin thin-shrink small-outline packages (TSSOP) for applications requiring minimum package size.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 1999, Texas Instruments Incorporated
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
1
TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION
SLVS124F JUNE 1995 REVISED JANUARY 1999
description (continued)
The RESET output of the TPS73xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS73xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage. If that occurs, the RESET output (open-drain NMOS) turns on, taking the RESET signal low. RESET stays low for the duration of the undervoltage condition. Once the undervoltage condition ceases, a 200-ms (typ) time-out begins. At the completion of the 200-ms delay, RESET goes high. An order of magnitude reduction in dropout voltage and quiescent current over conventional LDO performance is achieved by replacing the typical pnp pass transistor with a PMOS device. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (maximum of 35 mV at an output current of 100 mA for the TPS7350) and is directly proportional to the output current (see Figure 1). Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and remains constant, independent of output loading (typically 340 µA over the full range of output current, 0 mA to 500 mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. The LDO family also features a sleep mode; applying a logic high signal to EN (enable) shuts down the regulator, reducing the quiescent current to 0.5 µA maximum at TJ = 25°C. The TPS73xx is offered in 2.5-V, 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges (3% for the 2.5 V and the adjustable version). The TPS73xx family is available in PDIP (8 pin), SO (8 pin) and TSSOP (20 pin) packages. The TSSOP has a maximum height of 1.2 mm.
0.3 TA = 25°C 0.25 TPS7333 Dropout Voltage V 0.2 TPS7325 0.1 µF TPS7348 GND 0.1 TPS7350 0.05 TPS7325, TPS7330, TPS7333, TPS7348, TPS7350 (fixed-voltage options) Capacitor selection is nontrivial. See application information section for details. 1 2 3 TPS73xxPW TPS7330 VI 8 9 IN 10 IN 6 EN OUT 0.15 OUT SENSE 14 13 + CO 10 µF IN RESET 20 15 To System Reset 250 k VO
CSR = 1
0 0 50 100 150 200 250 300 350 400 450 500 IO Output Current mA
Figure 1. Dropout Voltage Versus Output Current
Figure 2. Typical Application Configuration
2
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
TPS7301Q, TPS7325Q, TPS7330Q, TPS7333Q, TPS7348Q, TPS7350Q LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED DELAYED RESET FUNCTION
SLVS124F JUNE 1995 REVISED JANUARY 1999
TPS73xxY chip information
These chips, when properly assembled, display characteristics similar to those of the TPS73xxQ. Thermal compression or ultrasonic bonding may be used on the doped aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS (5) (6) IN (4) EN (2) (3) TPS73xx (5) (6) (4) (7) (1) (7) GND CHIP THICKNESS: 15 TYPICAL 80 BONDING PADS: 4 × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. (1) (2) 92 (3) SENSE Fixed voltage options only (TPS7325, TPS7330, TPS7333, TPS7348, and TPS7350) FB Adjustable version only (TPS7301) NOTE A. For most applications, OUT and SENSE should be tied together as close as possible to the device; for other implementations, refer to SENSE-pin connection discussion in the applications information section of this data sheet. SENSE FB OUT RESET
functional block diagram
IN EN ¶ ¶ ¶ RESET _ + OUT + _ RESISTOR DIVIDER OPTIONS DEVICE TPS7301 TPS7325 TPS7330 TPS7333 TPS7348 TPS7350 R1 0 260 358 420 726 756 R2 233 233 233 233 233 UNIT k k k k k
NOTE A. Resistors are nominal values only. Delayed Reset SENSE§/FB R1
Vref
COMPONENT COUNT MOS transistors Bilpolar transistors Diodes Capacitors Resistors 464 41 4 17 76
R2
GND § For most applications, SENSE should be externally connected to OUT as close as possible to the device. For other implementations, refer to SENSE-pin connection discussion in applications information section. ¶ Switch positions are shown with EN low (active).
POST OFFICE BOX 655303
· DALLAS, TEXAS 75265
3
|
|