|
Details, datasheet, quote on part number:1S1835
| |
Datasheet text preview:
1S1834,1S1835
TOSHIBA Rectifier Silicon Diffused Type
1S1834, 1S1835
High Speed Rectifier Applications (fast recovery)
· · · · Average Forward Current: IF (AV) = 1.0 A (Ta = 50°C) Repetitive Peak Reverse Voltage: VRRM = 400, 600 V Reverse Recovery Time: trr (1) = 1.5 µs trr (2) = 0.35 µs Plastic Mold Type.
Maximum Ratings
Characteristics Repetitive peak reverse voltage Reverse voltage (DC) 1S1834 1S1835 1S1834 1S1835 Symbol V RRM Rating 400 600 300 500 1.0 60 (50 Hz) 66 (60 Hz) -40 to 125 -40 to 125 °C °C A A V Unit V
VR IF (AV) IFSM Tj Tstg
Average forward current (Ta = 50°C) Peak one cycle surge forward current (non repetitive) Junction temperature Storage temperature range
Electrical Characteristics (Ta = 25°C)
Characteristics Peak forward voltage Repetitive peak reverse current Symbol VFM IRRM (1) IRRM (2) Reverse recovery time Forward recovery voltage trr (1) trr (2) Vfr Test Condition IFM = 1.5 A VRRM = Rated VRRM = Rated, Tj = 125°C IF = 20 mA, IR = 1 mA IF = 20 mA, IR = 20 mA IF = 0.1 A, tr = 100 ns, tw = 5 µs Min Typ. Max 1.2 10 500 1.5 0.35 6 Unit V µA
µs V
Note1: Lead diameter not controlled in this zone to allow for flash, lead finish build-up, and minor irregularities other than slugs. Note2: Soldering: 5 mm is the minimum to be kept between case and soldering part. Note3: Lead bending: 5 mm is the minimum to be kept from the case when bend the lead wire.
000707EAA2
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk.
2000-10-31
1/2
1S1834,1S1835
Marking
Type Code Lot No. Code 35 Month (starting from alphabet A) Year (last number of the christian era) Cathode Mark Color: Silver 34 35 Type 1S1834 1S1835
iF vF
20 10 5 3 125 Tj = 25°C 200
Ta max IF (AV)
Maximum allowable ambient temperature Ta max (°C)
Lead wire length 160 10 mm 10 mm
Instantaneous forward current iF
(A)
120
Resistive or inductive load Printed circuit board Capacitive load
1 0.5 0.3
80
40
0.1 0.4
0.8
1.2
1.6
2.0
2.4
2.8
0 0
0.2
0.4
0.6
0.8
1.0
1.2
Instantaneous forward voltage vF (V)
Average forward current IF (AV)
(A)
Surge forward current (non-repetitive)
70
(A)
Tj = 25°C 60
Peak surge forward current IFSM
50
40
30
60 Hz 50
20 0
3
5
10
30
50
100
Number of cycles
000707EAA2
· The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice.
2000-10-31
2/2
|
|