|
Details, datasheet, quote on part number:JT6J14-AS
| |
Datasheet text preview:
JT6J14-AS
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
JT6J14-AS
COLUMN DRIVER FOR A DOT MATRIX LCD
The JT6J14-AS is a 120-channel-output column driver for a STN dot matrix LCD. The JT6J14-AS features 28 V LCD drive voltage and a 10 MHz maximum operating frequency. The JT6J14-AS is able to drive LCD panels with a duty ratio of up to 1 / 160. The JT6J14-AS is recommended for use with the JT6J15A-AS row driver.
Features
Display duty application LCD drive signal Data transfer LCD drive Voltage Power supply voltage Operating temperature LCD drive output resistance Display-off function Low Power Consumption : to 1 / 160 : 120 : 4-bit bi-directional : 11 to 28 V (maximum drive voltage = 30 V) : 2.7 to 5.5 V : -20 to 75°C : 2.2 k Max (V0 = 12.8 V, 1 / 7 to 1 / 14 bias) : When / DSPOF is "L", all LCD drive outputs (o1 to o120) remain at the VSS / V5 level. : Cascade connections and auto enable transfer functions are available.
Maximum operating frequency : 10 MHz (VDD = 4.5 V), 6.5 MHz (VDD = 2.7 V)
000707EBM1
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. · Light striking a semiconductor device generates electromotive force due to photoelectric effects. In some cases this can cause the device to malfunction. This is especially true for devices in which the surface (back), or side of the chip is exposed. When designing circuits, make sure that devices are protected against incident light from external sources. Exposure to light both during regular operation and during inspection must be taken into account. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice.
2001-02-05
1/11
JT6J14-AS
Block Diagram
2001-02-05
2/11
JT6J14-AS
Pin Assignment
2001-02-05
3/11
|
|
