Details, datasheet, quote on part number: TC6387XB
CategoryCommunication => Network => Secure digital host controllers (SDHC)
TitleSecure digital host controllers (SDHC)
DescriptionSecure Digital Host Controllers (SDHC) Are The First Standalone Chips to Provide a Dedicated Hardware Interface For SD Memory, Smartmedia And Multimedia Cards And CAN be Integrated Into Laptops, Cell Phones, Pdas, Digital Cameras And Other Mobile Products.
CompanyToshiba America Electronic Components, Inc.
DatasheetDownload TC6387XB datasheet
Find where to buy


Features, Applications

Toshiba Standard Memory Interface to Secure Digital (SD) Memory Card/ SDIO Card Controller--TC6387XB

Highlights Standard Memory Interface connects to any static RAM Versatile SD input/output (IO) supports a wide range of devices including GPS modules and wireless (802.11) extensions Supports one SD Memory/MultiMedia Card or one SDIO Card SD Memory Card equipped with locking mechanism for increased security Features Host Bus Interface: Standard Memory Interface Maximum operating clock frequency: 33MHz System Interface Interrupt support SUSPEND support Parallel Power Switch Support for Card Power Single Controller supports: SD Memory Card Controller Conforms to SD Memory Card "Physical Layer Specification SD memory card output clock frequency: 25MHz Maximum Supports 3.3V SD Memory Card Supports Multi-Block Read / Write SDIO Card Controller Conforms to SDIO Card Specification Version 1.0 SDIO card output clock frequency: 25MHz Maximum Supports 3.3V SD Memory Card Supports Multi-Block Read / Write Does not support the SPI mode MultiMedia Card Controller Conforms to MultiMedia Card System Specification 2.2 Does not support the SPI mode Device Specifications 0.35m CMOS process 0.8-mm ball pitch, 64-pin FBGA package, (Height: 1.2mm, Body Size: x 7mm)

NORTHWEST San Jose, CA TEL: (408) 526-2400 FAX: (408) 526-8910 Portland, OR TEL: (503) 629-0818 FAX: (503) 629-0827 SOUTHWEST Irvine, CA TEL: (949) 455-2000 FAX: (949) 707-5576 Richardson, TX TEL: (972) 480-0470 FAX: (972) 235-4114 CENTRAL Deerfield, IL TEL: (847) 945-1500 FAX: (847) 945-2902 NORTHEAST Wakefield, MA TEL: (781) 224-0074 FAX: (781) 224-1096 Edison, NJ TEL: (732) 248-8070 FAX: (732) 248-8030 SOUTHEAST Duluth, GA TEL: (770) 931-3363 FAX: (770) 931-7602

Toshiba is continuously working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing Toshiba products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a Toshiba product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that Toshiba products are used within specified operating ranges as set forth in the most recent product specifications. Also, please keep in mind the precautions and conditions set forth in the Toshiba Semiconductor Reliability Handbook. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Toshiba for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Toshiba or others. The information herein is subject to change without notice.

The technical data may be controlled under U.S. Export Administration Regulations and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export or re-export directly or indirectly, in contravention of the U.S. Export Administration regulations, is strictly prohibited.

All trademarks are of their respective manufacturer and may be registered in certain jurisdictions. Copyright 3/2002 TAEC


Some Part number from the same manufacture Toshiba America Electronic Components, Inc.
TC6391XB Host Bus Interface = Standard Memory I/f (SRAM Like) ;; Sdio Support = Yes ;; Card Interface = SD Memory Card/sdio Card or Smartmedia or Compact Flash or Usb ;; Additional Information = More Info
TC6393XB Secure Digital Host Controllers (SDHC) Are The First Standalone Chips to Provide a Dedicated Hardware Interface For SD Memory, Smartmedia And Multimedia Cards And CAN be Integrated Into Laptops, Cell Phones,
TC74AC00 Quad 2-input NAND Gate
TC74AC00FN Function = Quad 2-input NAND Gate ;; Pins = 14
TC74AC02 Quad 2-input NOR GATE
TC74AC02FN Function = Quad 2-input NOR GATE ;; Pins = 14
TC74AC04 Hex Inverter
TC74AC04FN Function = Hex Inverter ;; Pins = 14
TC74AC05 Hex Inverter (open Drain)
TC74AC05FN Function = Hex Inverter (open Drain) ;; Pins = 14
TC74AC08 Quad 2-input And Gate
TC74AC08FN Function = Quad 2-input And Gate ;; Pins = 14
TC74AC10 Triple 3-input NAND Gate
TC74AC109 Dual J-k Flip Flop With Preset And Clear
Same catergory

65-0087 : Use This Low-cost ic to Build a Complete Speech Recognition Solution With Very Few External Components..

IDT75K52413 : 4.5M Integrated Network Search Engine (NSE) With Quad Amcc XSC Interface.

LSIFC929 : Pci-x to Dual-channel Fibre Channel Solutionsthe LSIFC929X Controller Offers Industry-leading Performance at an Affordable Price. The LSIFC929X Controller Includes Three Embedded Arm Processors And Advanced Performance , Such as Adaptive Interrupt Coalescing And Native PCI-X. The LSIFC929X is a True Multifunctional Device Supporting Fibre Channel Protocol.

M34A02DW : 2 Kbit Serial Smbus EePROM For Acr Card Configuration. 2 Kbit Serial SMBus EEPROM for ACR Card Configuration Two Wire SMBus Serial Interface to 3.6V Single Supply Voltage Hardware Write Control BYTE and PAGE WRITE (up to 16 Bytes) RANDOM and SEQUENTIAL READ Modes Self-Timed Programming Cycle Automatic Address Incrementing Enhanced ESD/Latch-Up Behavior More than 1 Million Erase/Write Cycles More than 40 Year.

MAX5864 : Ultra-low-power, High-dynamic- Performance, 22msps Analog Front End. o Integrated Dual 8-Bit ADCs and Dual 10-Bit DACs o Ultra-Low Power 42mW at fCLK = 22MHz (Transceiver Mode) 34mW at fCLK = 15.36MHz (Transceiver Mode) Low-Current Idle and Shutdown Modes o Excellent Dynamic Performance 48.5dB SINAD at fIN = 5.5MHz (ADC) 71.7dB SFDR at fOUT = 2.2MHz (DAC) o Excellent Gain/Phase Match 0.1 Phase, 0.03dB Gain at fIN = 5.5MHz.

MB15B13 : Dual Serial Input PLL Frequency Synthesizer With 1.1ghz Prescaler. DUAL SERIAL INPUT PLL FREQUENCY SYNTHESIZER WITH 1.1GHz PRESCALER The Fujitsu a 1.1 GHz dual serial input PLL (Phase Locked Loop) frequency synthesizer designed for cellular phones, cordless phones and other radio applications. The MB15B13 has two PLL circuits on a single chip: PLL1 and PLL2. An analog switch is provided for each PLL circuit to decrease.

MC100E116 : Quint Diff Line Receiver. The is a quint differential line receiver with emitter-follower outputs. For applications which require bandwidths greater than that of the E116, the E416 device may be of interest. Active current sources plus a deep collector feature of the MOSAIC III process provide the receivers with excellent common-mode noise rejection. Each receiver has a dedicated.

MH88435AD-PI : MH88435 - North American Data Access Arrangement. FAX and Modem interface V.34(33k6) Externally programmable line and network balance impedances Programmable DC termination characteristics IEC950 recognised component Transformerless 2-4 Wire conversion Integral Loop Switch Dial Pulse and DTMF operation Accommodates parallel phone detection Line state detection outputs:loop current/ringing voltage/line.

MH88437AD-P : = Global Data Access Arrangement With CTR-21 Current Limit ;; Package Type = N/a ;; No. Of Pins =.

ML7029 : ADPCM Codecs. Multi-function Adpcm Codec. The is a single channel ADPCM Codec LSI device which performs mutual transcoding between the analog voice band signal and 32 kbps ADPCM serial data. The device includes transmit/receive data mute and gain control , and side-tone path and gain control. A wide clock frequency range allows for enhanced voice quality tuning. By using the serial interface,.

PAC001DTFQR : P/active 1% Tolerance Dual Thevenin Termination Network.

S5T8808X01 : = S5T8808A01 PLL Frequency Shnthesizer For Pager ;; Function = PLL Frequency Shynthesizer For Pager ;; = Maximum Operating Frequency(330 MHz@300mVp-p,VDD1=1.0V,VDD2=3.0V),superior Supply Current(fin =310 Mhz, IDD1=RPZmA@VDD1=1.0V, VDD2=3.0V) ;; Package = 16TSSOP ;; Production Status = Eol.

SN54CDC586 : 3.3-v Phase-lock-loop Clock Driver With 3-state Outputs. Low Output Skew for Clock-Distribution and Clock-Generation Applications Operates at 3.3-V VCC Distributes One Clock Input to 12 Outputs Two Select Inputs Configure Up to Nine Outputs to Operate at One-Half or Double the Input Frequency No External RC Network Required External Feedback Pin (FBIN) Is Used to Synchronize the Outputs to the Clock Input.

SN74LS48D : BCD to 7-segment Decoder. The is a BCD to 7-Segment Decoder consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. Seven NAND gates and one driver are connected in pairs to make BCD data and its complement available to the seven decoding AND-OR-INVERT gates. The remaining NAND gate and three input buffers provide lamp test, blanking input/rippleblanking input.

U2786B : . The RF IC for low-power DECT transmit applications. The IC includes a complete PLL with 1-GHz prescaler, on-chip frequency doubler, biasing for off-chip VCO, an integrated TX filter and a modulationcompensation circuit for advanced closed-loop modulation concept. Electrostatic sensitive device. Observe precautions for handling. D 1-GHz PLL, frequency.

XSD5401 : High-speed Dmos Quad Fet Analog Switch Arrays. High-Speed DMOS Quad FET Analog Switch Arrays The SD5000 Series are monolithic arrays of four bidirectional, high performance analog switches manufactured with implanted high-speed, high-voltage and low resistance double-difused MOS (DMOS) process. The maximum threshold of 2V permits simple TTL and CMOS driving in small signal applications. ORDERING.

B816 : XDSL SPLITTER FILTER MODULE POTS Central Office Splitter for standard ADSL applications LPF to ISDN 4B3T applications LPF matched to DT complex impedance for POTS applications ADSL2+ compatible.

0-C     D-L     M-R     S-Z