Details, datasheet, quote on part number: TC74AC32
PartTC74AC32
CategoryLogic => Gates => CMOS/BiCMOS->AC/ACT Family
TitleCMOS/BiCMOS->AC/ACT Family
DescriptionQuad 2-input OR GATE
CompanyToshiba America Electronic Components, Inc.
DatasheetDownload TC74AC32 datasheet
Quote
Find where to buy
 
  
Some Part number from the same manufacture Toshiba America Electronic Components, Inc.
TC74AC32F
TC74AC32FN Function = Quad 2-input OR GATE ;; Pins = 14
TC74AC367 Hex Bus Buffer (3-state)
TC74AC367F
TC74AC367FN Function = Hex Bus Buffer (3-state) ;; Pins = 16
TC74AC36FN
TC74AC373 Octal D-type Latch With 3-state Output
TC74AC373F
TC74AC373FT Function = Octal D-type Latch (3-state) ;; Pins = 20
TC74AC374 Octal D Type Flip-flop With 3-state Output
TC74AC374F Octal D-type Flip-flop With 3-state Output
TC74AC374FT
TC74AC374FW Function = Octal D-type Flip-flop (3-state) ;; Pins = 20
TC74AC377 Octal D Type Flip-flops With Clock Enable
TC74AC377F
TC74AC377FW Function = Octal D-type Flip-flop ;; Pins = 20
TC74AC37FT
TC74AC37FW
TC74AC390 High Speed CMOS Decade Counter
TC74AC390F
TC74AC390FN Function = Dual Decade Counter ;; Pins = 16
Same catergory

5962-9062501M2A : Inverting Buffers and Drivers. ti SN54BCT244, Octal Buffers/drivers With 3-State Outputs.

74AC821 : CMOS/BiCMOS->AC/ACT Family. 10-Bit D-type Flip-flop With 3-STATE Outputs.

74ALVCH32373 : 3.3V CMOS 32-BIT Transparent D-type Latch With 3-STATE Outputs And Bus-hold.

74LVC16241A : 74LVC16241A; 16-bit Buffer/line Driver (3-State);; Package: SOT362-1 (TSSOP48), SOT370-1 (SSOP48).

74LVT574 : CMOS/BiCMOS->LVT/ALVT/LCX/LPT Family->Low Voltage. Low Voltage Octal D-type Flip-flop With 3-STATE Outputs.

74LVTH573 : CMOS/BiCMOS->LVT/ALVT/LCX/LPT Family->Low Voltage. Low Voltage Octal Transparent Latch With 3-STATE Outputs.

CD54HC688 : CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic 8-bit Magnitude Comparator.

CD54HCT166F3A : ti CD54HCT166, High Speed CMOS Logic 8-Bit Parallel-in/serial-out Shift Register.

MC100EP90 : Bipolar->ECL 100 Family. Triple Lvecl to Lvpecl Translator. The is a TRIPLE ECL TO LVPECL/PECL translator. The device receives differential LVECL or ECL signals and translates them to differential LVPECL or PECL output signals. A VBB output is provided for interfacing with Single­Ended LVECL or ECL signals at the input. If a Single­Ended input to be used the VBB output should be connected to the D input. The active.

MC74AC273DW : Octal D-type Flip-flop Compatible Inputs , Package: Soic, Pins=20. The MC74AC273/74ACT273 has eight edge-triggered D­type flip­flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load and reset (clear) all flip­flops simultaneously. The register is fully edge-triggered. The state of each D input, one setup time before the LOW­to­HIGH clock transition, is transferred.

MC74AC823DW : 9-bit Register With 3-state Outputs. The MC74AC/ACT823 consists of nine D-type edge-triggered flip-flops. This device has 3-state outputs for bus systems, organized in a broadside pinning. In addition to the clock and output enabled pins, the buffered clock (CP) and buffered Output Enable (OE) are common to all flip-flips. The flip-flops will store the state of their individual D inputs.

QS74FCT251ATQ : High-speed CMOS 8-Input Multiplexer. CMOS power levels: <7.5mW static Undershoot clamp diodes on all inputs True TTL input and output compatibility Ground bounce controlled outputs Reduced output swing to 3.5V IOL = 48mA Available in SOIC and QSOP packages The is a high-speed CMOS TTL-compatible 8-input multiplexer with 3-state outputs. All inputs have clamp diodes for undershoot noise.

SN54ACT241 : Bus Oriented Circuits. These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The 'ACT241 devices are organized as two 4-bit buffers/drivers with separate complementary output-enable (1OE and 2OE) inputs. When 1OE is low 2OE is high,.

SN54LS298 : Multiplexers.

SN74LVCH32245A : Bus Oriented Circuits. 32-bit Bus Transceiver With 3-state Outputs. Member of the Texas Instruments Widebus+ Family Operates From 3.6 V Inputs Accept Voltages 5.5 V Max tpd 3.3 V Typical VOLP (Output Ground Bounce) V at VCC = 25°C Typical VOHV (Output VOH Undershoot) V at VCC = 25°C Ioff Supports Partial-Power-Down Mode Operation Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V.

TC74VCX16500FT : TC74VCX Series. Function = 18-Bit Universal Bus Transceiver ;; Pins = 56.

TC74VHCT74AF : CMOS/BiCMOS->VHC/VHCT/74V1 Family->Low Voltage. Dual D-type Flip-flop With Preset And Clear.

XC74UL32AAM : . NOperating Voltage Range : 2V~5.5V NLow Power Consumption : 1µA (max) The a 2-input CMOS OR gate, manufactured using silicon gate CMOS fabrication. CMOS low power circuit operation makes high speed LS-TTL operations achievable. With a wave forming buffer connected internally, stabilized output can be achieved as the circuit offers high noise immunity.

SN74AUP3G17 : Low-Power Triple Schmitt-Trigger Buffer The AUP family is TI’s premier solution to the industry’s low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire VCC range of 0.8 V to 3.6 V, resulting in increased battery life (see Figure 1). This product also maintains.

A2F200M3D-PQH208 : FPGA, 4608 CLBS, 200000 GATES, PQFP208. s: System Gates: 200000 ; Logic Cells / Logic Blocks: 4608 ; Package Type: QFP, Other, 0.50 MM PITCH, HALOGEN FREE, PLASTIC, QFP-208 ; Logic Family: CMOS ; Pins: 208 ; Operating Temperature: 0 to 85 C (32 to 185 F) ; Supply Voltage: 1.5V.

 
0-C     D-L     M-R     S-Z