Details, datasheet, quote on part number: TC74AC377
PartTC74AC377
CategoryLogic => Flip-Flops => CMOS/BiCMOS->AC/ACT Family
TitleCMOS/BiCMOS->AC/ACT Family
DescriptionOctal D Type Flip-flops With Clock Enable
CompanyToshiba America Electronic Components, Inc.
DatasheetDownload TC74AC377 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features: High Speed: fMAX = 140MHz (typ.) at VCC = 5V Low Power Dissipation: ICC = 8A (max.) = 25C High Noise Immunity: VNIH = VNIL = 28% VCC (min.) Symmetrical Output Impedance: IOH = IOL = 24mA (min.). Capability of driving 50 transmission lines. Balanced Propagation Delays: tpLH = tpHL Wide Operating Voltage Range: VCC (opr.) = 2V~5.5V Pin and Function Compatible with 74F377 Available in DIP, SOIC and SOP Packages

The is an advanced high speed CMOS OCTAL D-TYPE FLIP-FLOP fabricated with silicon gate and doublelayer metal wiring C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL, while maintaining the CMOS low power dissipation. These 8-bit D-type flip-flops are controlled by a clock input (CK) and a output enable input (G). The signal level applied to the D inputs are transferred to Q outputs during the positive going transition of CK. When the G is high, the eight outputs are in a high impedance state. All inputs are equipped with protection circuits against static discharge or transient excess voltage. Truth Table

D4 Q4 (TOP VIEW) VCC X: X Don't care X NO CHANGE CLOCK X DATA Q NO CHANGE

The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.

PARAMETER Supply Voltage Range DC Input Voltage DC Output Voltage Input Diode Current Output Diode Current DC Output Current DC VCC/Ground Current Power Dissipation Storage Temperature Lead Temperature 10sec SYMBOL VCC VIN VOUT IIK IOK IOUT ICC PD Tstg TL VALUE 0.5 -0.5~VCC (DIP) */180 (SOP) -65~150 300 UNIT 500mW in the range = -40C~65C. From 85C a derating factor of -10mW/C should be applied to 300mW.

PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time SYMBOL VCC VIN VOUT Topr dt/dv VALUE -40~85 0~100 (VCC 3.30.3V) 0~20 (VCC = 50.5V) UNIT V C ns/v

PARAMETER SYMBOL TEST CONDITION VCC 2.0 High-Level Input Voltage VIH 5.5 2.0 Low-Level Input Voltage VIL 5.5 2.0 IOH = -50A High-Level Output Voltage VOH VIN = VIH or VIL IOH = -4mA IOH = -24mA IOH = -75mA* IOL= 50A Low-Level Output Voltage VOL VIN = VIH or VIL IOL =12mA IOL = 24mA IOL = 75mA* Input Leakage Current Quiescent Supply Current IIN ICC VIN = VCC or GND VIN = VCC or GND Min. = 25C Typ. Max. = -40~85C Min. Max. A UNIT

* This spec indicates the capability of driving 50 transmission lines. One output should be tested at a time for a 10ms maximum duration.


Ta=25C PARAMETER SYMBOL tW(L) tW(H) tW(L) ts th TEST CONDITION VCC Minimum Pulse Width (CK) Minimum Set-up Time (DCK) Minimum Set-up Time (GCK) Minimum Hold Time Typ. Max. ns Ta= 40~85 UNIT

PARAMETER Propagation Delay Time (CKQ) Maximum Clock Frequency Input Capacitance Power Dissipation Capacitance SYMBOL tpLH tpHL fMAX CIN CPD1 TEST CONDITION VCC Min. = 25C Typ. Max. = -40~85C Min. Max. 10 ns MHz pF UNIT

Note (1): CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD VCC fIN + ICC / 8 (per F/F). And the total CPD when n pcs. of Flip-Flop operate can be gained by the following equation: CPD (total)=20+10 n.


 

Some Part number from the same manufacture Toshiba America Electronic Components, Inc.
TC74AC377F
TC74AC377FW Function = Octal D-type Flip-flop ;; Pins = 20
TC74AC37FT
TC74AC37FW
TC74AC390 High Speed CMOS Decade Counter
TC74AC390F
TC74AC390FN Function = Dual Decade Counter ;; Pins = 16
TC74AC393 CMOS Dual Binary Counter
TC74AC393F
TC74AC393FN Function = Dual Binary Counter ;; Pins = 14
TC74AC39FN
TC74AC39FT
TC74AC3FN
TC74AC520 CMOS Dual Binary Counter
TC74AC521F
TC74AC521FW Function = 8-bit Identity Comparator ;; Pins = 20
TC74AC52FW
TC74AC534 Octal D-type Flip-flop With 3-state Output
TC74AC534F
TC74AC534FW Function = Octal D-type Flip-flop (3-state/inv.) ;; Pins = 20
TC74AC53FW
Same catergory

5962-8950701CA : Standard Bus Switches. ti CD54HC4066, High Speed CMOS Logic Quad Bilateral Switch.

5962-9075801MEA : ti CD54HCT75, High Speed CMOS Logic Dual 2-Bit Bistable Transparent Latch.

74ACT11379DW : D-Type Flip-Flops. ti 74ACT11379, Quadruple D-type Flip-flops With Clock Enable.

74FCT162H501CTPACT : Universal Bus Transceivers (UBTs). ti CY74FCT162H501T, 18-Bit Universal Bus Transceivers With Bus-hold And 3-State Outputs.

74LVX174 : LVX->HCMOS, 5V Input Tolerant->Low Voltage, Low No. Low Voltage 3 to 8 Line Decoder (INV.) With 5V Tolerant Inputs.

CBTD16211 : . CBTD16211 24-bit level shifting bus exchange switch with 12-bit output enables 24-bit level shifting bus exchange switch with 12-bit output enables 5 switch connection between two ports TTL compatible control input levels Designed to be used in level shifting applications Package options include shrink small outline (SSOP) and The CBTD16211 provides.

DM74S08 : Bipolar->S Family. Quad 2-Input And Gate. This device contains four independent gates each of which performs the logic AND function. Order Number DM74S08N Package Number N14A Package 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Supply Voltage Input Voltage Operating Free Air Temperature Range Storage Temperature Range to +70C Note 1: The "Absolute Maximum Ratings".

M74HC4515 : HC/HCT->High Speed CMOS. 4 to 16 Line Decoder/latch. HIGH SPEED: tPD= 20 ns (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC at TA=25C HIGH NOISE IMMUNITY: VNIH = VNIL 28 % VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 4mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4515 The is an high speed CMOS 4 LINE TO 16 LINE.

MC74VHC1G04DFT1 : Inverter. The is an advanced high speed CMOS inverter fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. The internal circuit is composed of three stages, including a buffer output which provides high noise immunity and stable output. The MC74VHC1G04.

MC74VHC1G07DFT2 : Buffers. Single Noninverting Buffer With Open Drain Output , Package: SC-88A (SOT-353), Pins=5.

MC74VHC1GT32 : Single 2 Input OR GATE, TTL Level. The is an advanced high speed CMOS 2input OR gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. The internal circuit is composed of three stages, including a buffer output which provides high noise immunity and stable output. The device.

SDE2526-5 : Nonvolatile Memory 2-kbit E2PROM With I2c Bus Interface With Extended Temperature Range.

SN54HC4024FK : Asynchronous 7-bit Binary Counters.

SN74ALVCH162244DGG : 16-bit Buffer/driver With 3-state Outputs. Member of the Texas Instruments Widebus TM Family EPIC TM (Enhanced-Performance Implanted CMOS) Submicron Process Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 250 mA Per JESD.

SN74ALVCH162832DGG : 1-bit to 4-bit Address Register/driver With 3-state Outputs. Member of the Texas Instruments Widebus TM Family EPIC TM (Enhanced-Performance Implanted CMOS) Submicron Process Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 250 mA Per JESD.

TC74HC238 : CMOS/BiCMOS->HC/HCT Family. 3-to-8 Line Decoder.

TC74HC4051 : CMOS/BiCMOS->HC/HCT Family. 8-channel Analog Multiplexer/demultiplexer.

CBTD3861 : 10-bit Level Shifting Bus Switch With Output Enable The CBTD3861 provides ten bits of high-speed TTL-compatible bus switching. The low ON resistance of the switch allows connections to be made with minimal propagation delay. The CBTD3861 device is organized as one 10-bit bus switches with one output enable (OE) input. When OE is LOW, the switch is on and port.

 
0-C     D-L     M-R     S-Z