Details, datasheet, quote on part number: TC74AC52FW
PartTC74AC52FW
CategoryLogic => Comparators
Description
CompanyToshiba America Electronic Components, Inc.
DatasheetDownload TC74AC52FW datasheet
  

 

Features, Applications

Features: High Speed: tpd = 6.4ns (typ.) at VCC = 5V Low Power Dissipation: ICC = 8A (max.) = 25C* High Noise Immunity: VNIH = VNIL = 28% VCC (min.) Symmetrical Output Impedance: IOH = IOL = 24mA (min.). Capability of driving 50 transmission lines. Balanced Propagation Delays: tpLH = tpHL Wide Operating Voltage Range: VCC (opr) = 2V~5.5V Pin and Function Compatible with 74F521 Available in DIP, SOIC and SOP Packages The TC74AC520 and TC74AC521 are advanced high speed CMOS 8-BIT DIGITAL COMPARATORS fabricated with silicon gate and double-layer metal wiring C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL, while maintaining the CMOS low power dissipation. They compare two 8-bit binary or BCD words applied inputs P0~P7, and inputs Q0~Q7, and indicate whether or not they are equal. The TC74AC520 is equipped with pull-up resistors (20 typ.) to inputs Q0~Q7 and features pull-up resistors on the Q inputs for switch data. A signal active low enable is provided to facilitate cascading of several packages to compare words greater than 8 bits. All inputs are equipped with protection circuits against static discharge or transient excess voltage. IEC Logic Symbol

The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.

PARAMETER Supply Voltage Range DC Input Voltage DC Output Voltage Input Diode Current Output Diode Current DC Output Current DC VCC/Ground Current Power Dissipation Storage Temperature Lead Temperature 10sec SYMBOL VCC VIN VOUT IIK IOK IOUT ICC PD Tstg TL VALUE 0.5 -0.5~VCC (DIP) */180 (SOP) -65~150 300 UNIT 500mW in the range = -40C~65C. From 85C a derating factor of -10mW/C should be applied to 300mW.

PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time SYMBOL VCC VIN VOUT Topr dt/dv VALUE -40~85 0~100 (VCC 3.30.3V) 0~20 (VCC = 50.5V) UNIT V C ns/v

PARAMETER SYMBOL TEST CONDITION VCC 2.0 High-Level Input Voltage VIH 5.5 2.0 Low-Level Input Voltage VIL 5.5 2.0 IOH = -50A High-Level Output Voltage VOH VIN = VIH or VIL IOH = -4mA IOH = -24mA IOH = -75mA* IOL = 50A Low-Level Output Voltage VOL VIN = VIH or VIL IOL =12mA IOL = 24mA IOL 75mA* * This spec indicates the capability of driving 50 transmission lines. One output should be tested at a time for a 10ms maximum duration. Min. = 25C Typ. Max. = -40~85C Min. Max. UNIT

P3 Q3 P=Q Note: AC520 is equipped with pull-up resistors (20k typ.) to inputs Q4 P4

PARAMETER SYMBOL TEST CONDITION VCC Input Leakage Current High-Level Input Current Low-Level Input Current IIN IIH IIL P and G inputs only VIN = VCC or GND Q inputs only VIN = VCC Q inputs only VIN = GND Q inputs open P and G inputs, VIN = VCC or GND Q inputs, VIN = GND P and G inputs, VIN = VCC or GND Min. = 25C Typ. 0.3 Max. = -40~85C Min. Max. mA A UNIT

PARAMETER Input Leakage Current Quiescent Supply Current SYMBOL IIN ICC TEST CONDITION VCC VIN = VCC or GND VIN = VCC or GND 5.5 Min. = 25C Typ. Max. = -40~85C Min. Max. 80.0 A UNIT

PARAMETER Propagation Delay Time (Pn, QnP=Q) Propagation Delay Time (GP=Q) Input Capacitance Power Dissipation Capacitance SYMBOL tpLH tpHL tpLH tpHL CIN CPD1 TEST CONDITION VCC Min. = 25C Typ. Max. = -40~85C Min. Max. pF ns UNIT

Note (1): CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD VCC fIN + ICC.


 

Related products with the same datasheet
TC74ACT52FW
Some Part number from the same manufacture Toshiba America Electronic Components, Inc.
TC74AC534 Octal D-type Flip-flop With 3-state Output
TC74AC534F
TC74AC534FW Function = Octal D-type Flip-flop (3-state/inv.) ;; Pins = 20
TC74AC53FW
TC74AC540 Octal Bus Buffer
TC74AC540F
TC74AC540FT Function = Octal Bus Buffer (3-state/inv.) ;; Pins = 20
TC74AC541 Octal Bus Buffer
TC74AC541F
TC74AC541FT Function = Octal Bus Buffer (3-state/inv.) ;; Pins = 20
TC74AC54FT
TC74AC573 Octal D-type Latch With 3-state Output
TC74AC573F
TC74AC573FT Function = Octal D-type Latch (3-state) ;; Pins = 20
TC74AC574 Octal D-type Flip Flop With 3-state Output
TC74AC574F
TC74AC574FT Function = Octal D-type Flip-flop (3-state) ;; Pins = 20
TC74AC57FT
TC74AC640 Octal Bus Transceiver
TC74AC640F
TC74AC640FT Function = Octal Bus Transceiver (3-state/inv.) ;; Pins = 20
Same catergory

74ABT853 : 74ABT853; 8-bit Transceiver With 9-bit Parity Checker/ Generator And Flag Latch (3-State);; Package: SOT137 (SO24), SOT222-1 (DIP24), SOT340-1 (SSOP24), SOT355-1 (TSSOP24).

74LCX16501 : Bus Oriented Circuits. 18-Bit Universal Bus Transceivers With 5VTolerant Inputs And Outputs.

74V1T80 : VHC/VHCT Low Noise HCMOS. Single Positive Edge Triggered D-type Flip-flop.

DM74LS11 : Bipolar->LS Family. Triple 3-input And Gates. This device contains three independent gates each of which performs the logic AND function Alternate military aerospace device (54LS11) is available Contact a National Semiconductor Sales Office Distributor for s H e High Logic Level L e Low Logic Level X e Either Low or High Logic Level Absolute Maximum Ratings (Note) If Military Aerospace specified.

HCF4067 : HCF->CMOS 4000B Series. Analog Multiplexer/demultiplexer. LOW ON RESISTANCE : 125 (Typ.) OVER 15V p-p SIGNAL INPUT RANGE FOR VDD - VSS = 15V HIGH OFF RESISTANCE : CHANNEL LEAKAGE OF 10pA (Typ.) at VDD - VSS = 10V MATCHED SWITCH CHARACTERISTICS : RON = 5 (Typ.) FOR VDD - VSS =15V VERY LOW QUIESCENT POWER DISSIPATION UNDER A DIGITAL CONTROL INPUT AND SUPPLY CONDITIONS : 0.2W (Typ.) at VDD - VSS = 10V BINARY.

NL17SZ125DFT2 : Buffers. Non-inverting 3-State Buffer , Package: SC-88A (SOT-353), Pins=5.

SN54ABT18646 : Bus Oriented Circuits. Scan Test Device With 18-bit Transceivers And Registers.

SN54AS867 : . Fully Programmable With Synchronous Counting and Loading SN74ALS867A and AS867 Have Asynchronous Clear; SN74ALS869 and AS869 Have Synchronous Clear Fully Independent Clock Circuit Simplifies Use Ripple-Carry Output for n-Bit Cascading Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (NT) and Ceramic.

SN74AHC157D : Multiplexers. ti SN74AHC157, Quadruple 2-Line to 1-Line Data Selectors / Multiplexers.

SN74AS651 : Bus Oriented Circuits. Octal Bus Transceiver And Register With 3-state Outputs.

SN74GTLP1394D : Backplane Logic (GTL, GTLP, FB/FB+, ABTE/ETL). ti SN74GTLP1394, 2-Bit Lvttl-to-gtlp Adj-edge-rate Bus XCVR W/split LVTTL Port, Feedback Path, & Selectable Polarity.

SN74LVTH162241DGGR : Non-Inverting Buffers and Drivers. ti SN74LVTH162241, 3.3-V Abt 16-Bit Buffers/drivers With 3-State Outputs.

SN74S253 : Dual 4-line to 1-line Data Selectors/multiplexers With 3-state Outputs.

A3P030-2QNG132II : FPGA, 768 CLBS, 30000 GATES, 350 MHz, BCC132. s: System Gates: 30000 ; Logic Cells / Logic Blocks: 768 ; Package Type: Other, 8 X 8 MM, 0.75 MM HEIGHT, 0.50 MM PITCH, GREEN, QFN-132 ; Logic Family: CMOS ; Pins: 132 ; Internal Frequency: 350 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Supply Voltage: 1.5V.

EP2C35F484C6ES : FPGA, 2100 CLBS, PBGA484. s: Logic Cells / Logic Blocks: 2100 ; Package Type: Other, FBGA-484 ; Logic Family: CMOS ; Pins: 484 ; Operating Temperature: 0 to 85 C (32 to 185 F) ; Supply Voltage: 1.2V.

XQR2V1000-4BG575N : FPGA, 1280 CLBS, 1000000 GATES, 650 MHz, PBGA575. s: System Gates: 1.00E6 ; Logic Cells / Logic Blocks: 1280 ; Package Type: Other, 1.27 MM PITCH, PLASTIC, MS-034BAN-1, BGA-575 ; Logic Family: CMOS ; Pins: 575 ; Internal Frequency: 650 MHz ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Propagation Delay: 0.4400 ns ; Supply Voltage: 1.5V.

74F182SJC : F/FAST SERIES, 4-BIT LOOK-AHEAD CARRY GENERATOR, PDSO16. s: Number of Bits: 4 ; Supply Voltage: 5V ; Package Type: SOIC, 0.300 INCH, EIAJ, PLASTIC, SOIC-16 ; Logic Family: TTL ; Number of Pins: 16 ; Propagation Delay: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F).

 
0-C     D-L     M-R     S-Z