Details, datasheet, quote on part number: TC74AC640FT
CategoryLogic => TC74AC Series
TitleTC74AC Series
DescriptionFunction = Octal Bus Transceiver (3-state/inv.) ;; Pins = 20
CompanyToshiba America Electronic Components, Inc.
DatasheetDownload TC74AC640FT datasheet
Cross ref.Similar parts: HD74AC640T
Find where to buy
Related products with the same datasheet
Some Part number from the same manufacture Toshiba America Electronic Components, Inc.
TC74AC640FW Function = Octal Bus Transceiver (3-state/inv.) ;; Pins = 20
TC74AC74 Dual D-type Flip Flop With Preset And Clear
TC74AC74FN Function = Dual D-flip-flop With Preset And Clear ;; Pins = 14
TC74AC86 Quad Exclusive OR GATE
TC74AC86FN Function = Quad Exclusive OR GATE ;; Pins = 14
TC74ACT00 Quad 2-input NAND Gate
TC74ACT00FN Function = Quad 2-input NAND Gate ;; Pins = 14
TC74ACT02 Quad 2-input NOR GATE
TC74ACT02FN Function = Quad 2-input NOR GATE ;; Pins = 14
TC74ACT04 Hex Inverter
TC74ACT04FN Function = Hex Inverter ;; Pins = 14
TC74ACT08 Quad 2-input And Gate
TC74ACT08FN Function = Quad 2-input And Gate ;; Pins = 14
Same catergory

54ACT16623WD : 16-bit Bus Transceivers With 3-state Outputs. Members of the Texas Instruments Widebus TM Family Inputs are TTL-Voltage Compatible Flow-Through Architecture Optimizes PCB Layout Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-µm Process Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using.

CD4035BMS : CMOS/BiCMOS->4000 Family. CMOS 4 -stage Parallel In/parallel Out Shift Register.

IDT74LVCH2573A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage. 3.3v CMOS Octal Transparent D-type Latch With 3-state Outputs, 5v Tolerant I/o And Bus-hold.

IN74AC192D : Synchronous Decade Up/down Counter 16. The IN74AC192 is identical in pinout to the LS/ALS192, HC/HCT192. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. The counter has two separate clock inputs, a Count Up Clock and Count Down Clock inputs. The direction of counting is determined by which input is clocked. The outputs.

MC10H103FN : Quad 2-Input OR GATE , Package: Plcc, Pins=20. The is a quad 2­input OR gate. The MC10H103 provides one gate with OR/NOR outputs. This MECL 10H part is a functional/pinout duplication of the standard MECL 10K family part, with 100% improvement in propagation delay, and no increases in power­ supply current. Propagation Delay, 1.0 ns Typical Power Dissipation 25 mW/Gate (same as MECL 10K) Improved.

MC14029BD : Binary/decade Up/down Counter, Package: Soic, Pins=16. The MC14029B Binary/Decade up/down counter is constructed with MOS P­channel and N­channel enhancement mode devices in a single monolithic structure. The counter consists of type D flip­flop stages with a gating structure to provide toggle flip­flop capability. The counter can be used in either Binary or BCD operation. This complementary MOS counter.

MC74HC1G32DFT2 : Single 2-Input OR GATE , Package: SC-88A (SOT-353), Pins=5. The is a high speed CMOS 2­input OR gate fabricated with silicon gate CMOS technology. The internal circuit is composed of multiple stages, including a buffer output which provides high noise immunity and stable output. The MC74HC1G32 output drive current is 1/2 compared to MC74HC series. High Speed: tPD 7 ns (Typ) at VCC 5 V Low Power Dissipation:.

MSM6542-03 : Real Time Clock With Periodic And Alarm Output. The is a perpetual-calendar-based real time clock with an alarm function which can read and write data in units of seconds. It can be connected to various buses and can function as a peripheral of a microcomputer. The clock ranges are seconds, minutes, hours, days, months, years, and days of the week. The alarm ranges are seconds, minutes, hours, days,.

SCAN18540T : Bus Oriented Circuits. Inverting Line Driver With 3-STATE Outputs. The is a high speed, low-power line driver featuring separate data inputs organized into dual 9-bit bytes with byte-oriented paired output enable control signals. This device is compliant with IEEE 1149.1 Standard Test Access Port and Boundary Scan Architecture with the incorporation of the defined boundary-scan test logic and test access port consisting.

SN54ABTH18652A : Bus Oriented Circuits. Scan Test Devices With 18-bit Bus Transceivers And Registers: 18-bit.

SN74LV05A : CMOS/BiCMOS->LV/LVQ/LVX Family->Low Voltage. Hex Inverters With Open-drain Outputs.

SN74LVC3G14DCTR : Triple Gates. ti SN74LVC3G14, Triple Schmitt-trigger Inverter. NanoStar and NanoFree Packages Supports 5-V VCC Operation Inputs Accept Voltages 5.5 V Max tpd 3.3 V Low Power Consumption, 10-µA Max ICC ±24-mA Output Drive 3.3 V Typical VOLP (Output Ground Bounce) V at VCC = 25°C Typical VOHV (Output VOH Undershoot) V at VCC = 25°C Ioff Feature Supports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds.

74AUP1G3208GN : AUP/ULP/V SERIES, 3-INPUT OR-AND GATE, PDSO6. s: Gate Type: AND, OR ; Supply Voltage: 1.1 ; Logic Family: CMOS ; Inputs: 3 ; Propagation Delay: 20.1 ns ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Pin Count: 6 ; IC Package Type: Other, 0.90 X 1 MM, 0.35 MM HEIGHT, SOT-1115, SON-6.

935210570118 : LVC/LCX/Z SERIES, SYN POSITIVE EDGE TRIGGERED 4-BIT BIDIRECTIONAL BINARY COUNTER, PDSO16. s: Counter Type: BINARY COUNTER ; Counter Category: Synchronous ; Counter Direction: Bidirectional ; Supply Voltage: 1.2V, 3.6V, 2.7 ; Package Type: 3.90 MM, PLASTIC, MS-012AC, SOT-109-1, SO-16 ; Logic Family: CMOS, LVC/LCX/Z ; Number of Pins: 16 ; Number of Stages.

0-C     D-L     M-R     S-Z