|
|
Part: TL1102Series
Category:
Optoelectronics
-> Display
-> LEDs
Description:
Company: Toshiba America Electronic Components, Inc.
Datasheet: Download TL1102Series datasheet File size : 648 kB
Request For quote: Find where to buy TL1102Series
Datasheet text preview:
LED LED Lamps
PRODUCT GUIDE
s Toshiba Visible LED Lamp Family Outline
LED Lamp Family 299 products
High-blightness lead type: 231 products
· TLH Series · TLE Series · TLU Series
q InGaA P products are mainly from the World's highest luminosity level "TLH Series" to general-purpose "TLU Series" q Stopper lead type and straight lead type available. (for ø5-mm type only) Suffix "P" indicates straight or stopper type. (example: TLE16TP is straight type.)
Surface-mount devices (SMDs): 68 products
· TLH Series · TLE Series · TLU Series · S4F42 Series · S4F43 Series
q Package size: 1.6 x 0.8 mm 2.0 x 1.25 mm 3.2 x 2.4 mm (ø2 lens-top) 3.2 x 2.8 mm (flat type / ø3 lens-top) q Four-element ( InGaA P ) chip LEDs enable construction of low power dissipation equipment. q Wider operating range: Topr = --40°C to 100°C y (TL1100 Series, TL1102 Series, S4F42 Series, S4F43 Series)
Related catalog on website
T h e following related catalog are also published on the website. " L E D Lamps Application Guide" http://doc.semicon.toshiba.co.jp/noseek/us/buct/bcfm.htm 3
1 New Product Digest
1. New TLH Series (Ultra-High-Brightness ø5-mm LED Lamp Series)
Using thin-film crystal growth technology to produce the ultra-bright light-emitting material InGaA P, as well as a new process and structure. Toshiba has developed a new line-up of InGaA P ultra-bright LED lamps. These new LED lamps emit ultra-bright light. Higher brightness can be achieved at high temperature owing to an improved derating characteristic. The new series is effective in various applications such as outdoor LED information panels, high-brightness indications and backlighting for displays. y Features
q A brightness approximately 1.3 times that of the existing high-brightness InGaA P TLH Series of LED lamps can be achieved (comparison conditions: IF = 20 mA, Ta = 25°C, same radiation pattern) q Sufficient current can be obtained, even at high temperature, owing to an improved derating characteristic. Thus, at Ta = 50°C, brightness is approximately double that of the existing TLH Series. q High-brightness emission can be achieved even at low-current drive. Lowering the drive current reduces product power dissipation. q Four types of ø5-mm lens with various radiation patterns are available.
Derating Characteristics y Uses
LED information panels, indicators The package specification in the product number for new TLH Series is now given as two digits instead of three as at present.
Permissible Forward Current IF (mA)
60 50 40 30 20 10 -40 -20 0 20 40 60 80 100 120
Existing H Series NEW H Series
Ambient Temperature Ta (°C)
2. TLRME68TG Series (Round ø3-mm InGaA P LED Lamps Which Can Be Mounted Flush with PCB Using Surface Mounter)
When products are selected for use in equipment, mountability is a key factor. Most devices are now mounted using a high-speed surface mounter. To comply with this requirement, Toshiba has introduced a series of ø3-mm InGaA P LED lamps which can be mounted flush with a PCB using a surface mounter. High-brightness InGaA P, suitable for both indoor and outdoor applications, is used as the emitting substance. These new LED lamps can be used in a wide range of applications, such as LED information panels, low-powerconsumption indicators and high-brightness backlighting for displays. y Features
q Can be mounted flush with a PCB using a surface mounter. This enables reduction in assembly costs and time, reduction in height of finished product, and reduction of risk of damage due to finished products shifting during transportation. q High-brightness InGaA P LEDs used q Transparent packages with wide viewing angle q Emitted colors: red (626 nm and 613 nm), yellow and green q Superior derating characteristics enable excellent high-brightness emission in hightemperature environments. q Because high-brightness emission can be low, resulting in low power Derating Characteristics consumption by the equipment as a whole.
y
Uses
Display light sources, information display boards, light sources for backlighting
Permissible Forward Current IF (mA)
Solid line: TLRME68TG,TLYE68TG,TLGE68TG Dotted line: TLSU268G
50 40 30 20 10 0 -40 -20 0 20 40 60 80 Ambient Temperature Ta (°C) 100 120
4
Others parts begin by tl
TL-1 TL-2 TL-3 TL-4 TL-5 TL-6 TL-7 TL-8 TL-9 TL-10 TL-11 TL-12 TL-13 TL-14 TL-15 TL-16 TL-17 TL-18 TL-19 TL-20 TL-21 TL-22 TL-23 TL-24 TL-25 TL-26 TL-27 TL-28 TL-29 TL-30 TL-31 TL-32 TL-33 TL-34 TL-35 TL-36 TL-37 TL-38 TL-39 TL-40 TL-41 TL-42 TL-43 TL-44 TL-45 TL-46 TL-47 TL-48 TL-49 TL-50 TL-51 TL-52 TL-53 TL-54 TL-55 TL-56
|
|
|
