|
|
Part: TMP90CH44N/F
Category:
Microcontrollers
-> 8 bit
-> TLCS-90 Series
Description:
Company: Toshiba America Electronic Components, Inc.
Datasheet: Download TMP90CH44N/F datasheet File size : 584 kB
Request For quote: Find where to buy TMP90CH44N/F
Datasheet text preview:
TOSHIBA
TLCS-90 Series
TMP90CH44
CMOS 8Bit Microcontrollers TMP90CH44N/TMP90CH44F
1. Outline and Characteristics The TMP90CH44 is a high-speed, high performance 8-bit microcontroller developed for application in the control of various devices. TMP90CH44, CMOS 8-bit microcontroller, integrates an 8-bit CPU, ROM, RAM, A/D converter, multi-function timer/event counter, general-purpose serial interface and slave functions in a single chip, and with which external program memory and data memory can be extended up to 48KB. TMP90CH44N is a device with a 64-pin shrink DIP. TMP90CH44F is a device with a 64-pin flat package. The following are the features of TMP90CH44: (1) Highly efficient instructions: 163 types of basic instructions, including Multiplication, division, 16-bit arithmetic operations, bit manipulation instructions Minimum instruction executing time: 250ns (at 16MHz oscillation frequency) Built-in ROM: 16KB (4) (5) Built-in RAM: 512 bytes Memory expansion External program memory: 48KB External data memory: 48KB Highly accurate 8-bit A/D converter (4 channels) General-purpose serial interface (1 channel) With asynchronous mode and I/O interface mode Multi-function 16-bit timer/event counter (1 channel) 8-bit timer (4 channels) Stepping motor control and pattern generation ports (2 channels) Input/Output ports: 54 pins Slave function Interrupt function: 12 internal, 3 external Micro Direct Memory Access (DMA) function (4 channels) Watchdog timer function Standby function (3 HALT modes)
(6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16)
(2) (3)
The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/18
TMP90CH44
Figure 1. TMP90C844 Block Diagram
2/18
TOSHIBA CORPORATION
TMP90CH44
2. Pin Assignment and Functions
The assignment of input/output pins for TMP90C844, their name and outline functions are described below.
2.1 Pin Assignment Figure 2.1 (1) shows pin assignment of the TMP90C844N.
Figure 2.1 (1). Pin Assignment (Shrink DIP)
TOSHIBA CORPORATION
3/18
Others parts begin by tm
TM-1 TM-2 TM-3 TM-4 TM-5 TM-6 TM-7 TM-8 TM-9 TM-10 TM-11 TM-12 TM-13 TM-14 TM-15 TM-16 TM-17 TM-18 TM-19 TM-20 TM-21 TM-22 TM-23 TM-24 TM-25 TM-26 TM-27 TM-28 TM-29 TM-30
|
|
|
