|
|
Part: TMP90CM36-1
Category:
Microcontrollers
-> CISC->TMP
Description: CMOS 8-bit Microcontrollers
Company: Toshiba America Electronic Components, Inc.
Datasheet: Download TMP90CM36-1 datasheet File size : 584 kB
Request For quote: Find where to buy TMP90CM36-1
Datasheet text preview:
TOSHIBA
TLCS-90 Series CMOS 8Bit Microcontroller TMP90CM36F/TMP90CM36T
1. Outline and Characteristics The TMP90CM36 is a high-speed, high performance 8-bit microcontroller developed for application in the control of various devices. The TMP90CM36, CMOS 8-bit microcontroller, integrates an 8-bit CPU, ROM, RAM, A/D converter, D/A converter, multi-function timer/event counter, general-purpose serial interface, signal measure circuit, timing pulse generation circuit and PWM output in a single chip, and with which external program memory and data memory can be extended up to 31KB. The TMP90CM36F is a device with an 80-pin flat package. The TMP90CM36T is a device with an 84-pin QF (PLCC) package. The following are the features of the TMP90CM36: (1) Highly efficient instruction set: 167 basic instructions Division and multiplication instructions, 16-bit operation instructions and bit operation instructions Minimum instruction executing time: 250ns (at 16MHz oscillation frequency) Built-in ROM: 32K bytes Built-in RAM: 1K bytes Memory extension capability External program memory: 31K bytes External data memory: 31K bytes Interrupt functions: 18 internal, 5 external (7) (8) (9) (10) 8-bit A/D converter (8 channels) 8-bit D/A converter (2 channels) 12-bit D/A conversion (pulse width change of tone) output (2 channels) General-purpose serial interface mode (3 channels) · With asynchronous mode and I/O interface mode (1 channel) · With synchronous mode (1 channel) · I/O interface mode (1 channels) Timer function (1) 20-bit time base counter (2) 24-bit capture with 4 step FIFO (3) 24-bit timing pulse generation circuit (2 channels) (Comparator data 16-bit + timing output 8-bit) x 4 step FIFO (4) 16-bit timer/event counter (1 channel) ----- Built-in 2 capture register and 2 comparator (5) 8-bit timer (4 channels) ----- Built-in 1 comparator in each channel (6) Watchdog timer function (WDTOUT pin having) I/O ports: MAX64 pins HDMA function (2 channels) ----- 1 byte transmission: 1.75µs (@16.0MHz) Software standby function ----- RUN, STOP, IDLE modes Hardware standby function ----- STOP mode
TMP90CM36
(11)
(2) (3) (4) (5)
(12) (13) (14)
(6)
The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1
TMP90CM36
Figure 1. TMP90CM36 Block Diagram
2
TOSHIBA CORPORATION
TMP90CM36
2. Pin Assignment and Functions
The assignment of input/output pins for TMP90CM36, their name and outline functions are described below.
2.1 Pin Layout Diagram Figure 2.1 (1) shows the pin assignment of TMP90CM36F.
Figure 2.1 (1). Pin Assignments (Flat Package)
TOSHIBA CORPORATION
3
Others parts begin by tm
TM-1 TM-2 TM-3 TM-4 TM-5 TM-6 TM-7 TM-8 TM-9 TM-10 TM-11 TM-12 TM-13 TM-14 TM-15 TM-16 TM-17 TM-18 TM-19 TM-20 TM-21 TM-22 TM-23 TM-24 TM-25 TM-26 TM-27 TM-28 TM-29 TM-30
|
|
|
