|
|
Part: TMP90P800N/F
Category:
Microcontrollers
-> 8 bit
-> TLCS-90 Series
Description:
Company: Toshiba America Electronic Components, Inc.
Datasheet: Download TMP90P800N/F datasheet File size : 584 kB
Request For quote: Find where to buy TMP90P800N/F
Datasheet text preview:
TOSHIBA
TLCS-90 Series CMOS 8Bit Microcontrollers TMP90P800N/TMP90P800F
1. Outline and Characteristics The TMP90P800 is a system evaluation LSI having a built in One-Time PROM for TMP90C400/800. A programming and verification for internal PROM is
TMP90P800
achieved by using a general EPROM programmer with an adapter socket. The function of this device is exactly same as the TMP90C400 by programming to the internal PROM. The differences between TMP90P800 and TMP90C400 are the memory size (ROM/RAM). The following are the memory map of TMP90P800 and TMP90C400.
The TMP90P800N is in a Shrink Dual Inline Package (SDIP64-P-750).
The TMP90P800F is in a Quad Flat Package (QFP64-P1420A).
Parts No.
TMP90P800N TMP90P800F
ROM
OTP 8192 x 8bit
RAM
256 x 8bit
Package
64-SDIP 64-FP
Adapter Socket No.
BM1142 BM1147
The information contained here is subject to change without notice. The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/18
TMP90P800
Figure 1. TMP90P800 Block Diagram
2/18
TOSHIBA CORPORATION
TMP90P800
2. Pin Assignment and Functions
The assignment of input/output pins, their names and functions are described below.
2.1 Pin Assignment Figure 2.1 shows pin assignment of the TMP90P800.
Figure 2.1 (1). Pin Assignment (64-SDIP)
TOSHIBA CORPORATION
3/18
Others parts begin by tm
TM-1 TM-2 TM-3 TM-4 TM-5 TM-6 TM-7 TM-8 TM-9 TM-10 TM-11 TM-12 TM-13 TM-14 TM-15 TM-16 TM-17 TM-18 TM-19 TM-20 TM-21 TM-22 TM-23 TM-24 TM-25 TM-26 TM-27 TM-28 TM-29 TM-30
|
|
|
