|
|
Part: 855964
Category:
RF & Microwaves
-> Filters
-> SAW (Surface Acoustic Wave) Filters
Description: Description = Filter - Broadband Access ;; Frequency (MHz) = 1086 ;; Bandwidth (MHz) = 10 ;; Insertion Loss (dB) = 5.0 Max ;; Modes of Operation = Bal ;; Package (mm) = 3.0x3.0
Company: TriQuint Semiconductor
Datasheet: Download 855964 datasheet File size : 78 kB
Request For quote: Find where to buy 855964
Datasheet text preview:
Data Sheet
Features
· · · · · · · For broadband access applications Usable bandwidth 10 MHz High attenuation No impedance matching required for operation at 200 Balanced operation Ceramic Surface Mount Package (SMP) Small size
Part Number 855964 1086 MHz SAW Filter
·
Package
Surface Mount 3.00 x 3.00 x 1.22 mm
Pin Configuration
Bottom View
1 2 3
1.22 NOM. 1.32 MAX. 0.69
8 4
3.00
7 6 5
3.00 0.60
0.60
Pin No. 1 3 5 7 2,4,6,8
Description In p ut Balanced input Balanced output Output Case ground
1.20
0.75
Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating
Subject to change or obsolescence without notice
Rev F
12-Sep-2003
Page 1 of 5
Data Sheet
Operating Temperature Range: (2) -40 to +85 oC
Part Number 855964 1086 MHz SAW Filter
Electrical Specifications (1)
Parameter (3)
Center Frequency Maximum Insertion Loss 1081 - 1091 MHz 1.5 dB Bandedges Lower Bandedge Upper Bandedge Amplitude Ripple (4) 1081 - 1091 MHz Stopband Rejection (Test Fixture) 500 - 988 MHz 988 - 1002 MHz 1038 - 1046 MHz 1156 - 1600 MHz Group Delay Ripple 1081 - 1091 MHz Source Impedance (5) Load Impedance (5) Notes:
1. 2. 3. 4. 5.
Minimum
1091 50 52.5 40 40 -
Typical
1086 4 1076.5 1095.5 0.75 55 55 40 40 20 200 200
Maximum
5 1081 1.0 -
Unit
MHz dB MHz dB dB dB dB dB ns
All specifications are based on the test circuit shown below. Testing is carried out using test fixture 971748, test data sheet 122288-02, to equipment specification 100221. In production, devices will be tested at room temperature in a Sawtek test fixture to a guardbanded specification to ensure electrical compliance over temperature. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. Maximum peak to adjacent valley over the defined frequency range. This is the optimum impedance in order to achieve the performance shown.
Test Circuit:
1 5 200 3 2,4,6,8 7
200 Balanced
200
No impedance matching required
Subject to change or obsolescence without notice
Rev F
12-Sep-2003
Page 2 of 5
Data Sheet
Part Number 855964 1086 MHz SAW Filter
Typical Performance (at +25oC)
Subject to change or obsolescence without notice
Rev F
12-Sep-2003
Page 3 of 5
Data Sheet
Part Number 855964 1086 MHz SAW Filter
Matching Schematics
1 5 200 3 2,4,6,8 7
200 Balanced
200
No impedance matching required
Marking
Sawtek logo Marking code
PCB Footprint
1.39 .96
5 JJJYM
ID dot Date code
.81 3.20 SQ
.23 .81
.38
The date code consists of: JJJ = Julian day, Y = last digit of year, M = manufacturing site code
This footprint represents a recommendation only Dimensions shown are nominal in millimeters
Tape and Reel
2.7 12.8 Ø330 Sawtek logo
4.0 0.21 2.0 Ø1.5
A
1.75
5.5
12.0
ID dot Ø102 Ø20.2 Ø13.0 2.0
1.4 Section A-A
3.25
3.25
4.0 Ø1.5
A
Dimensions shown are nominal in millimeters Packaging quantity: 5000 units/reel
Subject to change or obsolescence without notice
Rev F
12-Sep-2003
Page 4 of 5
Data Sheet
Maximum Ratings
Parameter
Operating Temperature Range Storage Temperature Range
Part Number 855964 1086 MHz SAW Filter
Symbol
T Ts t g
Minimum
-40 -40
Maximum
+85 +85
Unit
o o
C C
Warnings
· · Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure
Links to Additional Technical Information
PCB Layout Tips S-Parameters Qualification Flowchart Soldering Profile Other Technical Information
Sawtek's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet.
Contact Information
PO Box 609501 Orlando, FL 32860-9501 USA Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@sawtek.com Web: www.sawtek.com
Rev F
Or contact one of our worldwide network of sales offices, representatives or distributors
Subject to change or obsolescence without notice
12-Sep-2003
Page 5 of 5
Others parts begin by 85
85-1 85-2
|
|
|
