Details, datasheet, quote on part number: 855966
Part855966
CategoryRF & Microwaves => Filters => SAW (Surface Acoustic Wave) Filters
DescriptionDescription = Filter - Egsm (Rx) High Rejection ;; Frequency (MHz) = 942.5 ;; Bandwidth (MHz) = 35 ;; Insertion Loss (dB) = 3.5 Max ;; Modes of Operation = Se/bal 200 Ohm ;; Package (mm) = 2.5 X 2.0
CompanyTriQuint Semiconductor
DatasheetDownload 855966 datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Features

For EGSM applications Usable bandwidth 35 MHz High attenuation Superior amplitude and phase balance Single-ended input Balanced output Ceramic Surface Mount Package (SMP) Small size

Description Input, Unbalanced Input, Case ground Output, Balanced

Dimensions shown are nominal in millimeters All tolerances are ±0.10mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating - 1.0µm, over 6µm Ni plating

Excluding losses due to matching Including losses in matching test circuit shown below

Amplitude Ripple - 960 MHz Absolute Attenuation - 880 MHz - 905 MHz - 915 MHz - 1050 MHz - 6000 MHz Input VSWR - 960 MHz Output VSWR - 960 MHz Output Phase Balance - 960 MHz Output Amplitude Balance - 960 MHz Optimal Source Impedance (4) Optimal Load Impedance (4) Notes:

All specifications are based on the test circuit shown below This specification is valid for room temperature only. The specification over the full temperature range(s) is available on the next page(s) Electrical margin has been built into the design to account for the variations due to manufacturing tolerances This is the complex conjugate of the unmatched filter's impedance resulting in maximum power transfer

Amplitude Ripple - 960 MHz Absolute Attenuation - 880 MHz - 905 MHz - 915 MHz - 1050 MHz - 6000 MHz Input VSWR - 960 MHz Output VSWR - 960 MHz Output Phase Balance - 960 MHz Output Amplitude Balance - 960 MHz Optimal Source Impedance (4) Optimal Load Impedance (4) Notes:

All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances This is the complex conjugate of the unmatched filter's impedance resulting in maximum power transfer


 

Some Part number from the same manufacture TriQuint Semiconductor
855969 Description = Filter - GPS RF Low Insertion Loss ;; Frequency (MHz) = 1575.42 ;; Bandwidth (MHz) = 2.4 ;; Insertion Loss (dB) = 1.8 Max ;; Modes of Operation = se ;; Package (mm) = 3.0 X 3.0
855975 Description = Filter - Wireless Data ;; Frequency (MHz) = 280 ;; Bandwidth (MHz) = 17 ;; Insertion Loss (dB) = 10.0 Max ;; Modes of Operation = SE, Bal ;; Package (mm) = 5.0 X 5.0
855990 1220 MHZ Saw Filter
855991 Description = Filter - Wireless Data ;; Frequency (MHz) = 465.0 ;; Bandwidth (MHz) = 16.6 ;; Insertion Loss (dB) = 14.0 Max ;; Modes of Operation = SE, Bal ;; Package (mm) = 5.0 X 5.0
855993 220.38 MHZ Saw Filter
856019 Description = Filter - STD 140 High-selectivity ;; Frequency (MHz) = 140 ;; Bandwidth (MHz) = 28 ;; Insertion Loss (dB) = 21.0 Max ;; Modes of Operation = se ;; Package (mm) = 9.0 X 7.0
856020
856049 1575.42 MHZ Saw Filter
856055 Description = Filter - Egsm (Rx) High Rejection ;; Frequency (MHz) = 942.5 ;; Bandwidth (MHz) = 35 ;; Insertion Loss (dB) = 3.9 Max ;; Modes of Operation = se ;; Package (mm) = 2.5 X 2.0
856056 Description = Filter - U.S. PCS (Tx) Full-band ;; Frequency (MHz) = 1880.0 ;; Bandwidth (MHz) = 60.0 ;; Insertion Loss (dB) = 4.0 Max ;; Modes of Operation = se ;; Package (mm) = 2.0 X 2.0
856062 Description = Filter - STD 140 High-selectivity ;; Frequency (MHz) = 140 ;; Bandwidth (MHz) = .75 ;; Insertion Loss (dB) = 23.0 Max ;; Modes of Operation = se ;; Package (mm) = 19.0 X 6.5
856063
856064
856065
856066
856067
856068
856069
856070 Description = Filter - STD High-selectivity ;; Frequency (MHz) = 140 ;; Bandwidth (MHz) = 14.1 ;; Insertion Loss (dB) = 24.5 Max ;; Modes of Operation = se ;; Package (mm) = 13.3 X 6.5
856071 Description = Filter - STD 140 High-selectivity ;; Frequency (MHz) = 140 ;; Bandwidth (MHz) = 16.2 ;; Insertion Loss (dB) = 22.5 Max ;; Modes of Operation = se ;; Package (mm) = 13.3 X 6.5
856072
Same catergory

10230-3 : = ;; Size LXWXH = 1.75 X 1.75 X 0.11" ;; Packaging = Caseless ;; Frequency MHZ = 30-76 ;; Power Handling Watts = 800.

1340 : Modules. = Lightwave Receiver ;; Applications = Telecommunications: Inter- & Intraoffice SONET/ITU-T/SDH; Subscriber Loop; Metro Area Networks ;; Bandwidth = to 1.25 Gb/s.

AH312 : . MHz +33 dBm P1dB +49 dBm Output 17 dB Gain @ 900 MHz Single Positive Supply (+5 V) The is a high dynamic range driver amplifier in a low-cost surface mount package. The InGaP/GaAs HBT is able to superior achieve performance over a broad frequency range with +49 dBm OIP3 and +33 dBm of 1-dB compressed output power. It is housed in an industry standard.

ASD500V : Surface Mount Small Signal Type. Extermely thin package Low stored charge Majority carrier conduction Case : Molded plastic, 0805 Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 Polarity : Indicated by cathode band Mounting Position : Any Weight : 0.000159 ounce, 0.0045 gram PARAMETER Repetitive peak reverse voltage Continuous reverse voltage Mean rectifying current.

CHA2066-RBF : Operational Frequency = 10-16GHz ;; Noise Figure = 2.0dB ;; Gain = 15dB ;; Gain Flatness = - ;; Gain Control Range = - ;; P-1dB = 13dBm ;; Case = SMD.

D1015UK : Purchase Online = ;; Package = DH ;; Impedance Calculator = ;; Operating Voltage (V) = 28 ;; Power Output (W) = 125 ;; Minimum Efficiency = 50 ;; Gain = 13 ;; Test Frequency (MHz) = 400 ;; Configuration = Push-pull ;; Application Range = 1-400MHz ;; Active Fet Configuration = 4+4 ;; BVDSS (V) = 70.

DS-318 :  Plug-In Two Way Power Divider, 5 - 500 MHZ. Low Cost Convenient Plug-In Mounting Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. Internal Load Dissipation: 0.125 Watts Max. MIL-STD-202 Screening Available A Power Divider is ideally a loss less reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner.

MHW8182B : MHW8182B 860 Mhz, 19.1 DB Gain, 128-Channel Catv Amplifier Module. Specified for 77­, 110­ and 128­Channel Loading Excellent Distortion Performance Superior Gain, Return Loss and DC Current Stability over Temperature Silicon Bipolar Transistor Technology Unconditionally Stable Under All Load Conditions Applications CATV Systems Operating in the to 860 MHz Frequency Range Input Stage Amplifier in Optical Nodes, Line.

MT26010 : Photo ic Coupler.

S-AU27AH : Power Modules. Package Dimensions = 5-53Q ;; Output Power po (W) = 32 ;; Input Power pi (W) = 0.2 ;; Frequency Range .f (MHz) = 490 to 512 ;; VCC (V) = 12.5/12.5/12.5 ;; Applications = Business.

SMV1771-079 : Tuning Varactor. Hyperabrupt Junction Tuning Varactor. Low Series Resistance High Capacitance Ratio Ultra Small Size SC-79 Package Designed for High Volume, Low Cost Battery Applications Available in Tape and Reel Packaging The is a silicon hyperabrupt junction varactor diode specifically designed for battery operation.The specified high capacitance ratio and low RS of this varactor make it appropriate.

SWX-01 : = Pin Diode Switches, High ISOlation-surface Mount ;; Freq. Range = 0.2-2.4 GHZ.

TGA6345 : GaAs. 2 - 18 GHZ Gain Block Amplifier. to 18 GHz Frequency Range 23 dB Typical Gain 1.6:1 Typical Input / Output SWR 22 dBm Typical Output Power 1 dB Gain Compression 6 dB Typical Noise Figure x 0.004 in.) The TriQuint is a monolithic amplifier which operates over the to 18 GHz Frequency range. This device consist of three cascaded distributed amplifier sections. Typical small signal gain.

TRF8011 : 900-mhz RF Transmit Driver. Operates from 4.8-V Power Supply for 900-MHz Applications Unconditionally Stable Wide UHF Frequency Range: 800 MHz to 1000 MHz 24.5 dBm Typical Output Power Linear Ramp Control Transmit Enable/Disable Control Advanced BiCMOS Processing Technology for Low-Power Consumption, High Efficiency, and Highly Linear Operation Minimum of External Components Required.

MRF6V2010N : Designed primarily for pulsed wideband large - signal output and driver applications with frequencies up to 450 MHz. Devices are unmatched and are suitable for use in industrial, medical and scientific applications. • Typical CW Performance at 220 MHz: VDD = 50 Volts, IDQ = 35 mA, Pout = 10 Watts Power Gain — 25 dB Drain Efficiency — 68% • Capable.

MD7IC2755NR1 : RF LDMOS Wideband Integrated Power Amplifiers The MD7IC2755N wideband integrated circuit is designed with on-chip matching that makes it usable from 2500-2700 MHz. This multi -stage structure is rated for 26 to 32 Volt operation and covers all typical cellular base station modulations..

SKY65367-11 : 169 To 170 MHz Transmit/Receive Front-End Module The SKY65367-11 is a high performance, transmit/receive (T/R) Front-End Module (FEM). The device includes a Power Amplifier (PA) capable of more than +29 dBm of transmit output power (VCC = 3.6 V) at more than 50 percent PAE for the module (60 percent for the standalone PA). For current-sensitive applications,.

 
0-C     D-L     M-R     S-Z