|
Details, datasheet, quote on part number:RCR5HXA
| |
| Part: | RCR5HXA |
| Category: | Timing Circuits => Oscillators => TCXO (Temperature Controlled Oscillators) |
| Description: | Frequency Range = 0.5MHz - 100MHz ;; Output Logic = CMOS/TTL, Siave ;; Package = R&s Series ;; Features = Stability to ± 0.05 Ppm, ± 1 PPM For Temp And 10 Years |
| Company: | Vectron International |
| Datasheet: | Download RCR5HXA datasheet File size : 144 kB |
| Request For quote: | Find where to buy RCR5HXA
|
| |
Datasheet text preview:
Product Data Sheet
SATCOM / "1 ppm Forever"
Temperature Compensated Crystal Oscillators
Features
Frequency from 0.5 MHz to 160 MHz Stability to ± 0.1 ppm 0 to 50°C +5Vdc to +24Vdc supply voltage options Sinewave, HCMOS, TTL options Over 500,000 units produced
Applications
SATCOM Base Stations and Picocells LMDS, WLL, SONET, Stratum 3
Description
The SATCOM and "1 ppm Forever" series of Temperature Compensated Crystal Oscillators (TCXO's) are available in frequencies from 0.5 MHz to 160 MHz. These series offer performance for short term stability, phase noise, G sensitivity, aging and temperature stability normally only associated with Oven Controlled Crystal Oscillators (OCXO's), while consuming typically < 20 mA. With over 500,000 units produced, Vectron International has more experience with this type of TCXO then the rest of the industry combined.
1
SATCOM / "1 ppm Forever" TCXO
Performance Characteristics Parameter
Output Options:
Characteristics
AC = ACMOS 0.5 HC = HCMOS 0.5 TD = 10 TTL 0.5 RG = 0 dBm 50 ohm 3.0 RC = +7.0 dBm 50 ohm 3.0 A17 = ± 0.1 ppm B37 = ± 0.3 ppm C57 = ± 0.5 ppm D16 = ± 1.0 ppm EA6 = ± 1.5 ppm AC HC TD RG RC = = = = = +12 Vdc ± 5% +12 Vdc ± 5% +12 Vdc ± 5% +5 Vdc ± 5% +12 Vdc ± 5% 0°C 0°C -20°C -40°C -55°C to 160 MHz to 160 MHz to 160 MHz to 30 MHz to 90 MHz to to to to to +50°C +70°C +70°C +85°C +85°C
Stability Options: (Other stability options are available)
Supply Voltage: (Other voltage options are available)
Allan Variance (typical): Aging (at 10MHz):
± 1 x 10-10 at tau = 1 sec "1 ppm Forever" SATCOM -110 dBc / Hz -135 dBc / Hz -150 dBc / Hz -155 dbc / Hz (SATCOM) < 0.2 ppm / 1st year < 0.7 ppm / 10 years < 0.5 ppm / 1st year < 2.0 ppm / 10 years @ 10 Hz offset @ 100 Hz offset @ 1 kHz offset @ 100 kHz offset RCR7HYA17C 10.00 MHz RGR5HXB37C 15.00 MHz
Phase Noise (typical): 10 MHz, RC option
Typical P/N:
("1 ppm Forever")
HY is predetermined, HX is for "1 ppm Forever" max temp range -20 to +70 Note: Not all stabilities are available with all options. Vectron International does not recommend wave soldering, IR reflow or other elevated temperature processing without consulting the factory. For AC, HC and TD outputs with frequencies above 30 MHz a low phase noise PLL multiplier will be used. Please inform the factory of your phase noise requirements.
Vectron International · 267 Lowell Road, Hudson, NH 03051 · Tel: 1-88-VECTRON-1 · Fax: 1-888-FAX-VECTRON
2
SATCOM / "1 ppm Forever" TCXO
38.887 max (1.531)
Pin
1 2 3 4 5
Function
Output +Vdd Gnd, Case Gnd / V tune Gnd
3 12.70 (0.50)
5.842 min (0.23)
13.462 (0.53) m a x
.508 (0.02) 25.4 (1.000) 12.70 (0.500)
0.762 DIA. 5 PLACES (.030)
4
20.320 (0.800)
Frequency Adjust: Option Specification HY ± 3 ppm min. via external voltage, 0 to +5 Vdc HX NONE
12.70 38.887 (1.531) m a x (0.500)
C L
25.4 (1.000) 2
5 1
10.160 6.350 (0.400) (0.250)
C L
R5 PACKAGE
mm (in.)
Pin
1 2 3 4 5
Function
Output +Vdd Gnd, Case Gnd Gnd
3 .508 (0.20)
38.887 max (1.531)
FREQUENCY ADJUST ACCESS
13.462 max (0.53)
5.842 min (0.23)
1.270 (0.05)
25.4 (1.000) 12.70 (0.500)
.508 (0.02) 0.762 DIA. 5 PLACES (.030)
4
Frequency Adjust: Option Specification HY & HX ± 3 ppm min. via internal mechanical adjust
38.887 max 12.70 (0.500) (1.531)
C L
20.320 (0.800)
5 2
1
25.4 (1.000)
10.160 6.350 (0.400) (0.250)
C L
R7 PACKAGE
Vectron International · 267 Lowell Road, Hudson, NH 03051 · Tel: 1-88-VECTRON-1 · Fax: 1-888-FAX-VECTRON
3
SATCOM / "1 ppm Forever" TCXO
50.8 ± .762 (2.00 ± .03)
FREQUENCY ADJUST ACCESS
Pin
1 2 3 4 5
Function
Output +Vdd Gnd, Case Gnd Gnd
25.4 (1.000) C L 12.70 (0.500)
3 4
12.192 (0.48) .508 (0.02)
2.54 (0.10)
19.812 max (0.78)
5.842 min (0.23)
1.270 (0.05)
C L
0.762 DIA. 5 PLACES (.030)
50.8 ± .762 (2.00 ± .03)
20.320 (0.800) 10.160 (0.400)
Frequency Adjust: Option Specification HY & HX ± 3 ppm min. via internal mechanical adjust
2
5
1
6.350 (0.250)
12.70 (0.500) 25.4 (1.000)
mm (in.)
S5 PACKAGE
Pin
1 2 3 4 5
Function
Output +Vdd Gnd, Case Gnd / V tune
.508 (0.02)
50.8 ± .762 (2.00 ± .03)
19.812 max (0.78)
5.842 min (0.23)
C L
Gnd
0.762 DIA. 5 PLACES (.030)
50.8 ± .762 (2.00 ± .03)
Frequency Adjust: Option Specification HY ± 3 ppm min. via external voltage, 0 to +5 Vdc HX NONE
25.4 (1.000) C L 12.70 (0.500)
3
4 5
1
2
20.320 (0.800) 10.160 (0.400)
6.350 (0.250)
12.70 (0.500) 25.4 (1.000)
S7 PACKAGE
Vectron International · 267 Lowell Road, Hudson, NH 03051 · Tel: 1-88-VECTRON-1 · Fax: 1-888-FAX-VECTRON
4
SATCOM / "1 ppm Forever" TCXO
Output Option Output Voh min. Voh max. Load (typical) Duty Cycle Rise and Fall AC ACMOS +4.5 Vdc +0.5 Vdc 100 k ohm // 10 pF 50% ± 10% 3 nS max. HC HCMOS +4.5 Vdc +0.5 Vdc 100 k ohm // 10 pF 50% ± 10% 5 nS max. TD 10 TTL +2.4 Vdc +0.5 Vdc 10 TTL 50% ± 10% 10 nS max.
Output Option Output Level Load Harmonics / Sub Other Spurious
RG Sinewave 0 dBm to +6 dBm 50 ohm -20 dBc max. -60 dBc max.
RC Sinewave +7.0 dBm to +13 dBm 50 ohm -20 dBc max. -60 dBc max.
Test Loads:
Vdd .01µF TEK 2465B 5 0 TEK 2465B
Vdd
DUT
OUT
50 COAX
.01µF
TEK P6137 PROBE
Vdd
50 Ohm Sinewave (RG & RC)
TEK 2465B
DUT
OUT
D1
R2 270
R1 6k
D2 D3 D4
C1 .01µF
Vdd .01µF
TEK P6137 PROBE DUT OUT
Standard TTL (TD)
CL RL
Standard CMOS (AC & HC) Vectron International · 267 Lowell Road, Hudson, NH 03051 · Tel: 1-88-VECTRON-1 · Fax: 1-888-FAX-VECTRON
5
|
|
