Details, datasheet, quote on part number: 232266052893
Part232266052893
Category
DescriptionPTC Thermistors For Overload And Overcurrent Protection
CompanyVishay Intertechnology
DatasheetDownload 232266052893 datasheet
  

 

Features, Applications

FEATURES

Different voltages to be chosen in function of the application Available in three mechanical versions: naked discs leaded and coated taped, on reel (to diameter 12.5 mm) Wide range of trip and non-trip currents: from 4.5 A for the trip current Wide range of resistance: from 3 k Small ratio between trip and non-trip currents (It/Int at 25 C) High maximum inrush current Excellent long term behaviour, also in humidity Leaded parts withstand mechanical stresses and vibration UL approved PTCs are guaranteed to withstand severe test programmes including: long-life cycle tests (over 5000 trip cycles) long-life storage tests (3000 hours at 250 C) electrical cycle tests at low ambient temperatures or 0 C) damp-heat and water immersion tests overvoltage tests 200% of rated voltage. UL file E148885 according to XGPU2 standard UL1434.

PARAMETER Switch temperature; note 1 Maximum voltage; note Temperature range: Climatic category: Notes types, have a 155C switch temperature. types, have 120 C switch temperature. 3. Rated voltages are respectively: 48 V (AC or DC) 120 V (AC or DC) 230 V (AC or DC). 265 V (DC) V (DC) V (RMS) V (RMS) VALUE 140 UNIT C

APPLICATIONS

Telecommunications Automotive systems Industrial electronics Consumer electronics Electronic data processing

DESCRIPTION

These directly heated thermistors have a positive temperature coefficient and are primarily intended for overload protection. They consist of a naked disc or with two tinned brass or copper clad steel leads and coated.

All tape and reel specifications are in accordance with "IEC 60286-3".

VERY LOW VOLTAGE TYPES 20 V ELECTRICAL DATA AND ORDERING INFORMATION for 66. 5...4; max. voltage 20 V (ac or dc)(1)

LOW VOLTAGE TYPES 60 V ELECTRICAL DATA AND ORDERING INFORMATION for 66. 4/5/6...1; max. voltage 60 V (ac or dc)(1)

MAINS VOLTAGE TYPES 145 V ELECTRICAL DATA AND ORDERING INFORMATION for 66. 4/5/6...2; max. voltage 145 V (ac or dc)(1)

MAINS VOLTAGE TYPES 265 V ELECTRICAL DATA AND ORDERING INFORMATION for 66. 4/5/6...3; max. voltage 265 V (ac or dc)(1)


 

Related products with the same datasheet
232266051193
232266051312
232266051593
232266051993
232266053514
232266053993
232266054714
232266054792
232266056393
232266056592
232266057693
Some Part number from the same manufacture Vishay Intertechnology
232266053514 PTC Thermistors For Overload And Overcurrent Protection
232266093034 PTC Thermistors, Overload Protection For Instrumentation
232266093049 PTC Thermistors, Time Delay For Lighting
232266151113 PTC Thermistors For Overload And Overcurrent Protection
232266193102 PTC Thermistors, Time Delay For Lighting
232266193113 PTC Thermistors, Overload Protection For Instrumentation
232266193114 PTC Thermistors, Time Delay For Lighting
232266251224 PTC Thermistors For Overload And Overcurrent Protection
232269190001 Humidity Sensor
2331 Readout Modules With Peak-hold Feature
255D Organic Polymer, Low Esr, Tantalum Capacitors, Commercial, Surface Mount Capacitors For Switch Mode Power Supplies And Converters
25Y ac Line Rated Disc Capacitors
285D Foil Tantalum Replacement, Gelled-electrolyte Sintered Anode Tantalex, For Operation to + 125°C, Hermetically-sealed

595D686X-025D2T : Solid Tantalum Chip Capacitors Tantamount Conformal Coated, Maximum CV

MAL209442681E3 : Aluminum Capacitors Power Miniaturized Economy Long Life Snap-in

173D565X9035XWE3 : 5.6F Tantalum Capacitor Axial 35V; CAP TANT 5.6UF 35V 10% AXIAL Specifications: Capacitance: 5.6F ; Voltage - Rated: 35V ; Tolerance: 10% ; Features: General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Lifetime @ Temp.: - ; Mounting Type: Through Hole ; Type: Molded ; Package / Case: Axial ; Packag

HL02506Z100R0JJ : 100 Ohm 25W Chassis Mount Resistors; RES 100 OHM 5% 25W TUBULAR WW Specifications: Resistance (Ohms): 100 ; Power (Watts): 25W ; Composition: Wirewound ; Features: - ; Temperature Coefficient: 30ppm/C ; Tolerance: 5% ; Size / Dimension: 0.563" Dia x 2.000" L (14.29mm x 50.80mm) ; Height: - ; Coating, Housing Type: Silicon Coated ; Mounting Feature: Brackets (not

CRCW020122K6FKED : 22K Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 22.0K OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 22K ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CRA06S08327K0JTB : Resistor 27 Ohm 62.5mW 4 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 27 OHM 4 RES 1206 Specifications: Resistance (Ohms): 27 ; Tolerance: 5% ; Power Per Element: 62.5mW ; Circuit Type: Isolated ; Number of Pins: 8 ; Packaging: Cut Tape (CT) ; Number of Resistors: 4 ; Package / Case: 1206 (3216 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: 200ppm/C ; Lead

FP175R0G : RESISTOR, METAL OXIDE FILM, 1 W, 2 %, 150 ppm, 75 ohm, THROUGH HOLE MOUNT Specifications: Category / Application: General Use ; Technology / Construction: MetalOxide ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED ; Resistance Range: 75 ohms ; Tolerance: 2 +/- % ; Temperature Coefficient: 150 ±ppm/°C ; Power Rating: 1 watts (0.0013 HP) ; Operating DC Volt

LCD-016N002P-PYE-EP : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-016N002V-WGE-CP : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-016N004E-YNE-ET : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

TSOP32330SS1BK : TRANSISTOR-STAGE OUTPUT PHOTO IC,LED-7B

VJ1825A821KXCAC : CAPACITOR, CERAMIC, MULTILAYER, 200 V, C0G, 0.00082 uF, SURFACE MOUNT, 1825 Specifications: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 8.20E-4 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 200 volts ; Temperature Coefficient: 30 ppm/°C ; Mounting Style: Surface Mount

 
0-C     D-L     M-R     S-Z