Details, datasheet, quote on part number: 4N35
Part4N35
Category
DescriptionOptocoupler, Phototransistor Output, With Base Connection
CompanyVishay Intertechnology
DatasheetDownload 4N35 datasheet
Cross ref.Similar parts: TLP185(SE, TLP385, FCD825D, H11A, PC4N35, PC713V3NSZX, H11A3
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES Interfaces with Common Logic Families Input-output Coupling Capacitance < 0.5 pF Industry Standard Dual-in-line 6-pin Package Field Effect Stable by TRIOS 5300 VRMS Isolation Test Voltage Underwriters Laboratory File #E52744 V VDE #0884 Approval Available with Option 1

DESCRIPTION This data sheet presents five families of Vishay Industry Standard Single Channel Phototransistor Couplers. These families include the 4N25/26/27/28 types, the 4N35/36/37/38 couplers, the H11A1/A2/ A3/A4/A5, the MCT2/2E, and MCT270/271/272/273/274/275/276/ 277 devices.Each optocoupler consists of Gallium Arsenide infrared LED and a silicon NPN phototransistor. These couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS Isolation Test Voltage. This isolation performance is accomplished through Vishay double molding isolation manufacturing process. Compliance to VDE 0884 partial discharge isolation specification is available for these families by ordering option 1. Phototransistor gain stability, in the presence of high isolation voltages, is insured by incorporating a TRansparent lOn Shield (TRIOS) on the phototransistor substrate. These isolation processes and the Vishay IS09001 Quality program results in the highest isolation performance available for a commercial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.

APPLICATIONS AC Mains Detection Reed Relay Driving Switch Mode Power Supply Feedback Telephone Ring Detection Logic Ground Isolation Logic Coupling with High Frequency Noise Rejection

Notes: Designing with data sheet is covered in Application Note 45.

Maximum Ratings TA=25C Emitter Reverse Voltage.......................................................................................... 6.0 V Forward Current........................................................................................ 60 mA Surge Current (t10 s)............................................................................... 2.5 A Power Dissipation................................................................................... 100 mW Detector Collector-Emitter Breakdown Voltage........................................................... 70 V Emitter-Base Breakdown Voltage................................................................ 7.0 V Collector Current....................................................................................... 50 mA Collector Current(t <1.0 ms).................................................................... 100 mA Power Dissipation................................................................................... 150 mW Package Isolation Test Voltage.......................................................................... 5300 VRMS Creepage.............................................................................................. 7.0 mm Clearance............................................................................................. 7.0 mm Isolation Thickness between Emitter and Detector............................... 0.4 mm Comparative Tracking Index per DIN IEC 112/VDE0303, part 1.................. 175 Isolation Resistance TA=100C............................................................................ 1011 Storage Temperature................................................................ to +150C Operating Temperature............................................................ to +100C Junction Temperature................................................................................ 100C Soldering Temperature (max. 10 s, dip soldering: distance to seating plane 1.5 mm)...................................................... 4N25/26/27/28--Characteristics TA=25C

Emitter Forward Voltage* Reverse Current* Capacitance Detector Breakdown Voltage* Collector-Emitter Emitter-Collector Collector-Base BVCEO BVECO BVCBO pF V Symbol Min. Typ. 0.1 25 Max. 1.5 100 Unit V Condition

ICBO(dark)* Capacitance, Collector-Emitter Package DC Current Transfer Ratio*

Saturation Voltage, Collector-Emitter Resistance, Input to Output* Coupling Capacitance Rise and Fall Times

* Indicates JEDEC registered values Document Number: 83717 Revision 17-August-01

Emitter Forward Voltage* Reverse Current* Capacitance Detector Breakdown Voltage, Collector-Emitter* 4N35/36/37 4N38 Breakdown Voltage, Emitter-Collector* Breakdown Voltage, Collector-Base* 4N35/36/37 4N38 Leakage Current, Collector-Emitter* 4N35/36/37 4N38 Leakage Current, Collector-Emitter* 4N35/36/37 4N38 Capacitance, Collector-Emitter Package DC Current Transfer Ratio* 4N38 DC Current Transfer Ratio* 4N35/36/37 4N38 Resistance, Input to Output* Coupling Capacitance Switching Time*

Emitter Forward Voltage H11A1H11A4 H11A5 Reverse Current Capacitance Detector Breakdown Voltage, Collector-Emitter Breakdown Voltage, Emitter-Collector Breakdown Voltage, Collector-Base Leakage Current, Collector-Emitter Capacitance, Collector-Emitter Package DC Current Transfer Ratio H11A4 H11A5 Saturation Voltage, Collector-Emitter Capacitance, Input to Output Switching Time


 

Related products with the same datasheet
4N36
4N37
4N38
Some Part number from the same manufacture Vishay Intertechnology
4N35GV Optocoupler, Phototransistor Output
4N36 Optocoupler, Phototransistor Output, With Base Connection
4N39 Optocoupler, Photoscr Output, 200 V Vrm, 10 a Surge Current
5058/6 Stand-off Insulators With Threaded Terminals
550D Solid Tantalum Capacitors, Solid-electrolyte TANTALEX®, For High Frequency Power Supplies, Hermetically Sealed, Low Esr, Axial Leads
561C Custom Capacitor Capability
591D Solid Tantalum Chip Capacitors, TANTAMOUNT®, Low Profile, Conformal Terminals, Maximum C/V, Low
Same catergory

FRK264D : 34a, 250v, 0.120 Ohm, Rad Hard, N-channel Power MOSFETs. 34A, 250V, RDS(on) = 0.120 Second Generation Rad Hard MOSFET Results From New Design Concepts Gamma Meets Pre-Rad s to 100KRAD(Si) Defined End Point Specs at 300KRAD(Si) and 1000KRAD(Si) Performance Permits Limited Use to 3000KRAD(Si) Survives at 80% BVDSS Typically Survives 2E12 Typically If Current Limited to IDM 22.0nA Per-RAD(Si)/sec Typically Pre-RAD.

LN513GAS : Numerical Display Devices. Numeric Size (mm) = 7.6 ;; Numeric Size (inch) = 0.3 ;; Element = 1 ;; Brightness = ;; Lighting Color = Green ;; Common Terminal = Anode ;; Remarks = ;; Package =.

TLE6252G : Fault Tolerant Low Speed Can-transceiver. Edition 2005-03-24 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 Mnchen, Germany All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties,.

311AS063XM08 : Composite Lamp Base Thread Emi/rfi Environmental Shield Termination Backshell.

DTD143E-AE3-6-R : NPN Digital Transistors (built-in Resistors). Spec. No. : C378N3 Issued Date : 2004.01.15 Revised Date : Page No. : 1/4 Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage.

CM8662 : Audio Power AMP WITH Shutdown MODE. AUDIO POWER AMP. WITH SHUTDOWN MODE The is a bridge-connected audio power amplifier capable of delivering typically 675mW of continuous average power an 8 load with 1% (THD) from a 5V power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. Since the CM8662.

UUE1E331MNS : Aluminum Electrolytic Capacitors. Chip type with load life ~ 5000 hours at 125C. Suited for automobile electronics where heavy duty services are indispensable. Adapted to the RoHS directive (2002/95/EC). s Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan 120Hz, 20C After 1 minutes' application of rated voltage, leakage.

94-210 : FATMAX CANTILEVER ROLLING WORKSHOP. s: Box Type: - ; Box Material: Conductive Plastic ; Box Color: - ; External Height - Imperial: - ; External Height - Metric: - ; External Width - Imperial: 21.97" ; External Width - Metric: 558mm ; External Depth - Imperial: 16.97" ; External Depth - Metric: 431mm.

06031A6R2BAT2A : 6.2pF Ceramic Capacitor 0603 (1608 Metric) 100V; CAP CER 6.2PF 100V NP0 0603. s: Capacitance: 6.2pF ; Voltage - Rated: 100V ; Tolerance: 0.1pF ; Package / Case: 0603 (1608 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC.

85102E2255P5016 : Olive Drab Cadmium Plated Panel Mount, Flange; Through Hole Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 55POS BOX MNT W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 22-55 ; Mounting Type: Panel Mount, Flange; Through Hole ; Fastening Type: Bayonet Lock ; : - ; Packaging: Bulk ; Number of Positions: 55 ; Termination:.

MPC8536EAVTATHA : Embedded - Microprocessor Integrated Circuit (ics) MPC85xx PowerQUICC III 32-Bit Tray 1V; MPU POWERQUICC III 783FCPBGA. s: Processor Type: MPC85xx PowerQUICC III 32-Bit ; Speed: 1.25GHz ; Voltage: 1V ; : - ; Package / Case: 783-BBGA, FCBGA ; Packaging: Tray ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

048069000000800+ : Rf Accessory Rf/if And Rfid; CONN SHIELD LOCK .2MM. s: Accessory Type: Shield Lock ; For Use With/Related Products: RF Shields ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

70HFR140 : Diodes, Rectifier - Single Discrete Semiconductor Product 70A 1400V (1.4kV) Standard; DIODE STD REC 1400V 70A DO-5. s: Diode Type: Standard ; Voltage - DC Reverse (Vr) (Max): 1400V (1.4kV) ; Current - Average Rectified (Io): 70A ; Voltage - Forward (Vf) (Max) @ If: 1.46V @ 220A ; Reverse Recovery Time (trr): - ; Current - Reverse Leakage @ Vr: 4.5mA.

4-1879127-1 : 340 Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 340 OHM 1/16W 0.1% 0402. s: Resistance (Ohms): 340 ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 10ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

BS-A41DLD : 7 SEG NUMERIC DISPLAY. s: Display Type: Segmented ; Character Type: Numeric.

IQF-20L-3000B : 2700 MHz - 3300 MHz RF/MICROWAVE I/Q DEMODULATOR, 12 dB CONVERSION LOSS-MAX. s: Product Type: I & Q Demodulator ; Package Type: HERMETIC SEALED, L-FLATPACK-18 ; Carrier Frequency: 2700 to 3300 MHz ; VSWR: 2 1.

V105ADAG8 : LINE DRIVER, PQFP144. s: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 3.3V ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Package Type: LQFP, 14 X 14 MM, GREEN, LQFP-144 ; Pins: 144 ; : RoHS.

 
0-C     D-L     M-R     S-Z