Details, datasheet, quote on part number: 769D107X0010A2
Part769D107X0010A2
Category
DescriptionWet Tantalum Capacitors With Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors Cecc 30202-013 Approved
CompanyVishay Intertechnology
DatasheetDownload 769D107X0010A2 datasheet
  

 

Features, Applications

Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode, TANTALEX Capacitors CECC 30202-013 Approved

FEATURES

For 125C operation Very high CV per unit volume Long shelf life in excess of ten years Extremely low leakage current Epoxy end-filled for better shock and vibration performance

Operating Temperature: + 125C Capacitance Tolerance: 20% is standard; 10% and 5% available as specials. Capacitance Range: to 2200F Life Test: Capacitors are capable of withstanding a 2000 hour life test at a temperature 125C at the applicable rated DC working voltage.

APPLICATIONS

Designed for industrial and telecommunications applications, offers higher microfarad value per unit volume than any other type. The epoxy resin end-fill construction also offers improved mechanical strength, outstanding resistance to temperature cycling, and trouble-free application when flow-soldering capacitors to printed circuit board.

This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow.

This is expressed in volts. See Ratings and Case To complete the three-digit block, zeros precede the Codes Table. voltage rating.

Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to the unit weight.

Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode TANTALEX Capacitors CECC 30202-013 Approved

Max. + 25C Max. IMP. 120 Hz (Ohms) Max. DCL (A) + 125C Max. CAPACITANCE CHANGE - 55C Max. RMS RIPPLE + 125C (mA)


 

Related products with the same datasheet
769D106X0025A2
769D106X0050A2
769D106X0100A2
769D107X0015A2
769D107X0025B2
769D107X0030C2
769D107X0060B2
769D107X0075C2
769D108X0010C2
769D108X0020D2
769D116X0100B2
Some Part number from the same manufacture Vishay Intertechnology
769D107X0015A2 Wet Tantalum Capacitors With Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors Cecc 30202-013 Approved

222246955472 : Metallized Polyester Film Capacitors MKT Radial Epoxy Lacquered Type

CCF5525R5FKE36 : Metal Film Resistors, Industrial, 1% Tolerance

TSP806H1001FUF : Molded, Commercial, Single In-line Resistor Network (standard)

MAL214255682E3 : 6800F Aluminum Capacitor Radial, Can 16V; CAP ALUM 6800UF 16V 20% RADIAL Specifications: Capacitance: 6800F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 105C ; Size / Dimension: 0.630" Dia (16.00mm) ; Lead Spacing: 0.295" (7.50mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, C

RCWE2010R620FKEA : 0.62 Ohm 1W Chip Resistor - Surface Mount; RES .62 OHM 1W 1% 2010 SMD Specifications: Resistance (Ohms): 0.62 ; Power (Watts): 1W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ALSR102R000FE12 : 2 Ohm 7W Through Hole Resistors; RES 2.0 OHM 1% WW AXIAL Specifications: Resistance (Ohms): 2 ; Power (Watts): 7W ; Tolerance: 1% ; Packaging: Bulk ; Composition: Wirewound ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

HDY3K0500B : RES,RADIAL,METAL FOIL,3.05K OHMS,300WV,.1% +/-TOL,-2.5,2.5PPM TC,4217 CASE Specifications: Category / Application: General Use

MF55167KOHMS0.1% : RES,AXIAL,METAL FILM,167K OHMS,200WV,.1% +/-TOL,-15,15PPM TC Specifications: Category / Application: General Use ; Standards and Certifications: RoHS

SI4770CY-T1 : HALF BRIDGE BASED PRPHL DRVR, PDSO16 Specifications: Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: SO-16 ; Pins: 16

VRD101K/100MTF : RC NETWORK, TAPPED FILTER NETWORK, 1W, 100ohm, 0.00001uF, SURFACE MOUNT, SOT-3 Specifications: Configuration: Chip Array (optional feature), Resistor, Capacitor Network ; Technology / Construction: Thin Film (Chip) ; Tolerance: 10 +/- % ; Temperature Coefficient: 200 ±ppm/°C ; Power Rating: 1 watts (0.0013 HP) ; Number of Resistors: 1 ; Capacitance Range: 10 pF ; Capacitance

87HFR160 : 85 A, 1600 V, SILICON, RECTIFIER DIODE, DO-203AB Specifications: Package: DO-5, ROHS COMPLIANT, DO-5, 1 PIN ; Number of Diodes: 1 ; VRRM: 1600 volts ; IF: 85000 mA ; RoHS Compliant: RoHS

 
0-C     D-L     M-R     S-Z