Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors CECC 30202-013 Approved
· For 125°C operation· Very high CV per unit volume· Long shelf life in excess of ten years· Extremely low leakage current· Epoxy end-filled for better shock and vibration performance
Operating Temperature: + 125°C Capacitance Tolerance: 20% is standard; ± 10% and ± 5% available as specials. Capacitance Range: to 2200µF Life Test: Capacitors are capable of withstanding a 2000 hour life test at a temperature 125°C at the applicable rated DC working voltage.
· Designed for industrial and telecommunications applications, offers higher microfarad value per unit volume than any other type. The epoxy resin end-fill construction also offers improved mechanical strength, outstanding resistance to temperature cycling, and trouble-free application when flow-soldering capacitors to printed circuit board.
This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow.
This is expressed in volts. See Ratings and Case To complete the three-digit block, zeros precede the Codes Table. voltage rating.
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to the unit weight.
Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode TANTALEX® Capacitors CECC 30202-013 Approved
Max. + 25°C Max. IMP. 120 Hz (Ohms) Max. DCL (µA) + 125°C Max. CAPACITANCE CHANGE - 55°C Max. RMS RIPPLE + 125°C (mA)