Details, datasheet, quote on part number: 769D247X0075D2
DescriptionWet Tantalum Capacitors With Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors Cecc 30202-013 Approved
CompanyVishay Intertechnology
DatasheetDownload 769D247X0075D2 datasheet


Features, Applications

Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode, TANTALEX Capacitors CECC 30202-013 Approved


For 125C operation Very high CV per unit volume Long shelf life in excess of ten years Extremely low leakage current Epoxy end-filled for better shock and vibration performance

Operating Temperature: + 125C Capacitance Tolerance: 20% is standard; 10% and 5% available as specials. Capacitance Range: to 2200F Life Test: Capacitors are capable of withstanding a 2000 hour life test at a temperature 125C at the applicable rated DC working voltage.


Designed for industrial and telecommunications applications, offers higher microfarad value per unit volume than any other type. The epoxy resin end-fill construction also offers improved mechanical strength, outstanding resistance to temperature cycling, and trouble-free application when flow-soldering capacitors to printed circuit board.

This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow.

This is expressed in volts. See Ratings and Case To complete the three-digit block, zeros precede the Codes Table. voltage rating.

Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to the unit weight.

Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode TANTALEX Capacitors CECC 30202-013 Approved

Max. + 25C Max. IMP. 120 Hz (Ohms) Max. DCL (A) + 125C Max. CAPACITANCE CHANGE - 55C Max. RMS RIPPLE + 125C (mA)


Related products with the same datasheet
Some Part number from the same manufacture Vishay Intertechnology
769D256X0008A2 Wet Tantalum Capacitors With Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors Cecc 30202-013 Approved

307C1366 : PTC Thermistors For Electronic Fluorescent Ballasts

CS20108D0X104SSE : Capacitor Networks, Single-in-line,conformal Coated SIP,

TR3E157K016C0075 : 150F Tantalum Capacitor 2917 (7343 Metric) 10V; CAP TANT 150UF 10V 10% 2917 Specifications: Capacitance: 150F ; Voltage - Rated: 10V ; Tolerance: 10% ; Features: General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): 80.0 mOhm ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Molded ; Package / Case: 2917

MBB02070C1621FRP00 : 1.62K Ohm 0.6W Through Hole Resistors; RES 1.62K OHM 0.6W 1% 0207 Specifications: Resistance (Ohms): 1.62K ; Power (Watts): 0.6W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CSC08A035K60GPA : Resistor 5.6K Ohm 300mW 4 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 5.6K OHM 4 RES 8-SIP Specifications: Resistance (Ohms): 5.6K ; Tolerance: 2% ; Power Per Element: 300mW ; Circuit Type: Isolated ; Number of Pins: 8 ; Packaging: Bulk ; Number of Resistors: 4 ; Package / Case: 8-SIP ; Mounting Type: Through Hole ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Contains Lead ;

LCD-016N002V-RBL-EP : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-320H240A-BFE : LCD DOT MATRIX GRAPHIC DISPLAY MODULE,WHITE Specifications: Display Type: Dot Matrix

MBE0414VD4533BC100 : RESISTOR, THIN FILM, 0.65 W, 0.1 %, 25 ppm, 453000 ohm, THROUGH HOLE MOUNT Specifications: Category / Application: General Use ; Technology / Construction: Thin Film (Chip) ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED, ROHS COMPLIANT ; Resistance Range: 453000 ohms ; Tolerance: 0.1000 +/- % ; Temperature Coefficient: 25 ±ppm/°C ; Power Rating: 0.6500 wa

SOMC2001280KFDC : RESISTOR, NETWORK, FILM, BUSSED, 1.52 W, SURFACE MOUNT Specifications: Configuration: Chip Array ; Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), DIP ; Tolerance: 1 +/- % ; Temperature Coefficient: 100 ±ppm/°C ; Power Rating: 1.52 watts (0.0020 HP) ; Oper

ST3230C16R3LPBF : 5970 A, 1000 V, SCR Specifications: VDRM: 1000 volts ; VRRM: 1000 volts ; IT(RMS): 5970 amps ; IGT: 400 mA ; Standards and Certifications: RoHS ; Package Type: RPUK-2 ; Pin Count: 2

120PC66.5KOHMS0.005% : RES,RADIAL,WIREWOUND,66.5K OHMS,300WV,.005% +/-TOL,-10,10PPM TC Specifications: Category / Application: General Use

0-C     D-L     M-R     S-Z