Details, datasheet, quote on part number: 769D825X0060A2
DescriptionWet Tantalum Capacitors With Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors Cecc 30202-013 Approved
CompanyVishay Intertechnology
DatasheetDownload 769D825X0060A2 datasheet


Features, Applications

Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors CECC 30202-013 Approved


For 125°C operation Very high CV per unit volume Long shelf life in excess of ten years Extremely low leakage current Epoxy end-filled for better shock and vibration performance

Operating Temperature: + 125°C Capacitance Tolerance: 20% is standard; ± 10% and ± 5% available as specials. Capacitance Range: to 2200µF Life Test: Capacitors are capable of withstanding a 2000 hour life test at a temperature 125°C at the applicable rated DC working voltage.


Designed for industrial and telecommunications applications, offers higher microfarad value per unit volume than any other type. The epoxy resin end-fill construction also offers improved mechanical strength, outstanding resistance to temperature cycling, and trouble-free application when flow-soldering capacitors to printed circuit board.

This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow.

This is expressed in volts. See Ratings and Case To complete the three-digit block, zeros precede the Codes Table. voltage rating.

Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to the unit weight.

Wet Tantalum Capacitors with Epoxy End-Fill, Sintered Anode TANTALEX® Capacitors CECC 30202-013 Approved

Max. + 25°C Max. IMP. 120 Hz (Ohms) Max. DCL (µA) + 125°C Max. CAPACITANCE CHANGE - 55°C Max. RMS RIPPLE + 125°C (mA)


Related products with the same datasheet
Some Part number from the same manufacture Vishay Intertechnology
769D825X0075A2 Wet Tantalum Capacitors With Epoxy End-Fill, Sintered Anode, TANTALEX® Capacitors Cecc 30202-013 Approved
790D Resin-Molded, Radial-lead Solid Tantalum Capacitors
7FA Specialty High Voltage Items, RF Duty Capacitors
893D Solid Tantalum Chip Capacitors, TANTAMOUNT®, Built-in-fuse Miniature, Molded Case in Three Case Codes, Fusible, Meets Eia 535BAAC And Iec Specification QC300801/US0001, Automatic Pick And Place Compatible

RCL122516R0FKEG : 16 Ohm 2W Chip Resistor - Surface Mount; RES 16 OHM 2W 1% 1225 WIDE Specifications: Resistance (Ohms): 16 ; Power (Watts): 2W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

IRF9Z34STRLPBF : 18 A, 60 V, 0.14 ohm, P-CHANNEL, Si, POWER, MOSFET Specifications: Polarity: P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 60 volts ; rDS(on): 0.1400 ohms ; Number of units in IC: 1

LCD-016N002C-YGL-EN : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-020N001B-PGC-EU : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-020N002M-ABK-EU : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

M55342M06B57D6RS2 : RESISTOR, METAL GLAZE/THICK FILM, 0.15 W, 1 %, 300 ppm, 57.6 ohm, SURFACE MOUNT, 0705 Specifications: Category / Application: General Use ; Technology / Construction: Thick Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), CHIP, HALOGEN FREE ; Resistance Range: 57.6 ohms ; Tolerance: 1 +/- % ; Temperature Coefficient: 300 Ā±ppm/Ā°C ; Power Rating: 0.1500 watts

P4SMA12AT/R13 : 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC Specifications: Configuration: Single ; Direction: Unidirectional ; Package: PLASTIC, SMA, 2 PIN ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 114 to 126 volts ; RoHS Compliant: RoHS

PL-42-16 : POWER TRANSFORMER, 1.5 VA Specifications: Category: Power ; Other Transformer Types / Applications: STANDARD ; Mounting: Chip Transformer ; Power Rating (VA): 1.5 VA

200D668X9006A1 : CAPACITOR, TANTALUM, NON SOLID, POLARIZED, 6 V, 6600 uF, CHASSIS MOUNT Specifications: Applications: General Purpose ; Electrolytic Capacitors: Tantalum ; Features: Polarized ; Capacitance Range: 6600 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 6 volts ; Mounting Style: CHASSIS MOUNT ; Operating Temperature: -55 to 85 C (-67 to 185 F)

0-C     D-L     M-R     S-Z