Details, datasheet, quote on part number: SM5S13
PartSM5S13
Category
Description
CompanyVishay Intertechnology
DatasheetDownload SM5S13 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Surface Mount Automotive Transient Voltage Suppressors
Features

Ideally suited for load dump protection Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature stability due to unique oxide passivation and patented PARconstruction Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation Low leakage current = 175C High temperature soldering guaranteed: 260C for 10 seconds at terminals Meets ISO7637-2 surge spec. Low forward voltage drop

Case: Molded plastic body, surface mount with heatsink integrally mounted in the encapsulation Terminals: Plated, solderable per MIL-STD-750, Method 2026 Polarity: Heatsink is anode Mounting Position: Any Weight: 0.091 oz., 2.58 g Packaging codes/options: 2D/750 per 13" Reel (16mm Tape), anode towards sprocket hole, 4.5K/box 2E/750 per 13" Reel (16mm Tape), cathode towards sprocket hole, 4.5K/box

Maximum Ratings and Thermal Characteristics (TC = 25C unless otherwise noted)

Parameter Peak pulse power dissipation with 10/1000s waveform 10/10,000s waveform Steady state power dissipation Peak pulse current with a 10/1000s waveform

Peak forward surge current, 8.3ms single half sine-wave Typical thermal resistance junction to case Operating junction and storage temperature range

Notes: (1) Non-repetitive current pulse derated above = 25C

Note: For all types maximum = 100A measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum

Ratings and Characteristic Curves (TA = 25C unless otherwise noted)
Load Dump Power Characteristics (10ms Exponential Waveform)
= 25C Pulse width (td) is defined as the point where the peak current decays 50% of IPP 10,000

 

Related products with the same datasheet
SM5S10
SM5S10A
SM5S11
SM5S11A
SM5S12
SM5S12A
SM5S13A
SM5S14
SM5S14A
SM5S15
SM5S15A
Some Part number from the same manufacture Vishay Intertechnology
SM5S13A
SM6A27
SM6S
SM6T
SM8A27
SM8S

MAL213658151E3 : Aluminum Capacitors Radial Very Low Impedance

IHSM3825PJ390L : Fixed Inductors, Coils, Choke 39H 860mA 0.440" L x 0.250" W x 0.225" H (11.18mm x 6.35mm x 5.72mm) Ferrite Core; INDUCTOR POWER 39UH 0.86A SMD Specifications: Inductance: 39H ; Tolerance: 15% ; Package / Case: 0.440" L x 0.250" W x 0.225" H (11.18mm x 6.35mm x 5.72mm) ; Packaging: Bulk ; Type: Ferrite Core ; Current: 860mA ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 490 mOhm Max ; Sh

RCWE0402R110FNEA : 0.11 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES .11 OHM 1/8W 1% 0402 SMD Specifications: Resistance (Ohms): 0.11 ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

PAT0805E1271BST1 : 1.27K Ohm 0.2W, 1/5W Chip Resistor - Surface Mount; RES 1.27K OHM 0.20W 0.1% 0805 Specifications: Resistance (Ohms): 1.27K ; Power (Watts): 0.2W, 1/5W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

TNPW2010576RBEEF : 576 Ohm 0.4W Chip Resistor - Surface Mount; RES 576 OHM .40W 0.1% 2010 Specifications: Resistance (Ohms): 576 ; Power (Watts): 0.4W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

LCD-016N004E-WNH-JP : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-040N004A-TYH-EN : LCD DOT MATRIX CHARACTER MODULE Specifications: Display Type: Dot Matrix

LCD-160H032A-YGH : LCD DOT MATRIX GRAPHIC DISPLAY MODULE,AMBER Specifications: Display Type: Dot Matrix

LCD-160H080A-GFL : LCD DOT MATRIX GRAPHIC DISPLAY MODULE,BLUE Specifications: Display Type: Dot Matrix

MFM6581.6KOHMS0.05% : RES,MELF,FILM,81.6K OHMS,350WV,.05% +/-TOL Specifications: Category / Application: General Use ; Standards and Certifications: RoHS

RCMS116.2OHM1%K3 : RESISTOR, METAL FILM, 0.5 W, 1 %, 50 ppm, 16.2 ohm, THROUGH HOLE MOUNT Specifications: Category / Application: General Use ; Technology / Construction: MetalFilm ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED ; Resistance Range: 16.2 ohms ; Tolerance: 1 +/- % ; Temperature Coefficient: 50 ±ppm/°C ; Power Rating: 0.5000 watts (6.70E-4 HP) ; Operating D

SML4764-61-E3 : 100 V, 1 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-214AC Specifications: Diode Type: VOLTAGE REGULATOR DIODE

 
0-C     D-L     M-R     S-Z