|
Details, datasheet, quote on part number:WA20S-CD
| |
| Part: | WA20S-CD |
| Description: | Body Components Available With Any Desired Pin And Socket Combination, Floating Contacts, Meets Applicable Paragraphs of MIL-C-28748 |
| Company: | Vishay Intertechnology |
| Datasheet: | Download WA20S-CD datasheet File size : 55 kB |
| Request For quote: | Find where to buy WA20S-CD
|
| |
Datasheet text preview:
A20 and WA20
Vishay Dale
Rack and Panel Connectors
Side Mount
FEATURES
· Body components available with any desired pin and socket combination. · Floating contacts. · Polarization accomplished by reversed pin and socket combination. · Model A20 has barriers for increased creepage distance. · Thru hole permits use of building block technique or flat mounting. · Meets applicable paragraphs of MIL-C-28748.
APPLICATIONS
Broad - limited only by those applications requiring physical, electrical and/or materials specifications exceeding those indicated.
MATERIAL SPECIFICATIONS
Standard Body: Glass-filled diallyl phthalate per MIL-M-14, model GDI-30F green. Pin Contacts: Brass, gold plated. Socket Contacts: Phosphor bronze, gold plated.
ELECTRICAL SPECIFICATIONS
Breakdown Voltage (Contact to Contact): At sea level: 2000 V RMS. At 70,000 feet [21,336 meters]: 500 V RMS. Current Rating: 7.5 amps.
PHYSICAL SPECIFICATIONS
Minimum Creepage Path between Contacts: A20 = 0.08" [2.03mm]; WA20 = 0.05" [1.27mm]. Minimum Air Space between Contacts: A20 = 0.08" [2.03mm]; WA20 = 0.05" [1.27mm]. Contact, Center to Center: A20 = 0.150" [3.18mm]; WA20 = 0.125" [3.17mm].
DIMENSIONS in inches [millimeters]
A20P-CD
0.180 [4.57] 0.093 [2.36] Dia. Thru Contact Socket 0.150 [3.81] Lettering on Wire Side Only B D 0.265 [6.73]
Contact Pin
0.218 [5.54] Solder Cups Accommodate #20 AWG Wire 0.200 [5.08] 0.360 [9.14] 0.031 [0.79] 0.750 [19.05] 0.750 [19.05] 0.360 [9.14] 0.180 [4.57] Solder Cups Accommodate #20 AWG Wire B 0.437 [11.11] D 0.275 [6.99] A C 0.437 [11.10] A C
0.040 [1.02] Dia.
0.275 [6.99]
A20S-CD
0.200 [5.08] 0.040 [1.02] Dia. 0.218 [5.54] 0.150 [3.81]
Lettering on Wire Side Only 0.265 [6.73]
Contact Socket 0.093 [2.36] Dia. Th ru 0.031 [0.79]
www.vishay.com 12
Document Number 36018 Revision 22-Aug-00
A20 and WA20
Vishay Dale
DIMENSIONS in inches [millimeters]
WA20P-CD
0.170 [4.32] 0.093 [2.36] Dia. Thru Contact Socket 0.125 [3.18] Lettering on Wire Side Only
Contact Pin 0.040 [1.02] Dia.
0.220 [5.59]
82° C-sink (Far Side) Solder Cups Accommodate #20 AWG Wire 0.340 [8.64] 0.750 [19.05]
0.440 [11.18]
A
B DALE WA20P C D
0.281 [7.14]
0.220 [5.59]
0.250 [6.35]
WA20S-CD
0.220 [5.59] 0.040 [1.02] Dia. 0.220 [5.59] 0.750 [19.05] 0.340 [8.64] 0.170 [4.32] Solder Cups Accommodate #20 AWG Wire 0.440 [11.18] B A DALE WA20S D C 0.125 [3.18]
Lettering on Wire Side Only 0.281 [7.14]
82° C-sink 0.172 [4.37]
Contact Socket 0.093 [2.36] Dia. Thru
0.250 [6.35]
ORDERING INFORMATION
A20 WA20 MODEL P BODY STYLE AB CONTACT LOCATION A EMPTY CONTACT POSITIONS
Side Mount with 4 positions for #20 AWG contacts.
P - Designates pin style body. S - Designates socket style body. These designations are used to identify mating connectors, however, any combination of pin and socket contacts may be ordered in either style body. Therefore, when designators 3 and 4 are the same, a connector designated A20P or WA20P will mate with a connector designated A20S or WA20S. Example: A20P-CD mates with A20S-CD A20S-AB mates with A20P-CD
Designates pin contact positions in an A20P or WA20P connector or socket contact positions in an A20S or WA20S connector (specify "A", "B", "C", "D" or any combination of the four).
Specify by contact identification letter (A, B, etc.) any contact positions which are to be left empty (omit, if none required).
EXAMPLE 1: A20P-CD or WA20P-CD = Connector with pin contacts in positions "C" and "D" and socket contacts in positions "A" and "B".
EXAMPLE 2: A20S-CD or WA20S-CD = Connector with socket contacts in positions "C" and "D" and pin contacts in positions "A" and "B" (would mate with Example 1 at left).
EXAMPLE 3: A20P-BC or WA20P-BC-A = Connector with pin contacts in positions "B" and "C", socket contact in position "D" and no contact in position "A" (would mate with A20S-BC or WA20S-BC-A).
Document Number 36018 Revision 22-Aug-00
www.vishay.com 13
|
|
