|
Details, datasheet, quote on part number:QC6107
| |
Datasheet text preview:
MARCH 1994 QC6107/8 Series
DS3856-1.5
QC6107/8 Series
0.0015 to 30MHz QUARTZ CRYSTAL OSCILLATORS
The QC6107/8 Series Quartz Crystal Oscillators are specifically designed to give a wide range of available frequencies within a rugged DIL package for use in harsh environments and professional applications. Operating up to 125°C and down to -55°C the package is available in 4 or 14 pin style and is fully conditioned to the requirements of BS9625 F0014.
FEATURES
I Full Military Temperature Range I Qualified to BS9625 F0014 I DIL Package - 4 or 14 Pin Available I Rugged Design I 100% Conditioned I TTL/HCMOS Available
ELECTRICAL SPECIFICATION
Parameters Available Frequency Ranges Power Consumption (Max) Output Voltage at: Logic '0' (Max) Logic '1' (Max) Rise & Fall Times (Max): Between 1.5 & 3.5V Between 0.4 & 2.0V Load Drive Capability (Max): Standard TTL Gates HCMOS Mark Space Ratio Temperature Range: Operating Storage Supply Voltage Start-up Time (Typ) Stability: Short Term (1s average typ) Acc. Ageing (30 days 85°C) With Supply (Vcc ±10%) With Load (5pF to 50pF) With Load (1 to 10 gates) With Temperature * Suffixes as selected from Table 1 5 ± 0.5 4 5 ± 0.5 4 QC6107/xx-xx * HCMOS/TTL 0.0015 to <6 55 6-15 50 15-30 90 QC6108/xx-xx * TTL 0.375 to <6 200 6-15 100 15-30 150 Units MHz mW
0.1 Vcc 0.9Vcc
0.1Vcc 0.9Vcc
0.4 2.4
0.4 2.4
V V
15
10 10 10
ns ns
2 50 55:45 to 45:55
2 50 60:40 to 40:60
10
10
pF pF
55:45 to 45:55
60:40 to 40:60 °C °C 5 ± 0.5 4 V ms
See Table 1 -65 to +150 5 ± 0.5 4
5 x 10-10 ±5 ±5 ±2
5 x 10-10 ±5 ±5 ±2
5 x 10-10 ±5 ±5 ±2 See Table 1
5 x 10-10 ±5 ±5 ±2
ppm ppm ppm ppm °C
1
QC6107/8 Series
FREQUENCY/ TEMPERATURE CHARACTERISTICS: Table 1 Frequency Tolerance Over Temperature Range (ppm max) WRt Nominal Frequency ±25 ±50 ±50 ±100 ±25 ±50 ±50 ±100
Type Number QC6107 or QC6108 as selected /1A-1B /1A-2B /1A-3B /1A-4B /2A-1B /2A-2B /2A-3B /2A-4B
Operating Temperature Range °C -40 to +85 -40 to +85 -55 to +125 -55 to +125 -40 to +85 -40 to +85 -55 to +125 -55 to +125
Outline 4 pin 4 pin 4 pin 4 pin 14 pin 14 pin 14 pin 14 pin
Note: Replace B with an A if non BS release device is required, eg. /1A-1A
ENVIRONMENTAL SPECIFICATION
BUMP SEVERITY 4000 ±10 bumps at 390m/s2 peak acceleration, pulse duration 6ms in each direction of three mutually perpedicular axes. 10 to 60Hz 3.5 peak displacement 60 to 5000Hz 490m/s2 peack accn. 5 sweeps at 1 octave/min. in each of three mutually perpedicular axes (4hr 30mins. total). 0.5g2/Hz between 20Hz and 2kHz. Duration 30 mins. in each of three mutually perpedicular axes. 14700m/s2 peak acceleration for 0.5ms duration half sine pulse. 5 shocks in each direction of three mutually perpendicular axes.
VIBRATION SEVERITY (SINUSOIDAL)
VIBRATION SEVERITY (RANDOM)
SHOCK SEVERITY
ACCELERATION (STEADY STATE) Conditioning Test Only SOLDERABILITY CLIMATIC CATEGORY STORAGE TEMPERATURE 49000m/s2 steady acceleration for 1 min. duration in the Y1 direction. BS2011 test TA 55/125/56 -65°C to 150°C
2
QC6107/8 Series
MECHANICAL SPECIFICATION
WEIGHT (Typical) OUTLINE DRAWINGS (Dimensions in mm) 3.5 gms
Pin Connections 1 7 8 14 NC E O/P +5V
Pin Connections 1-6 7 8 9-13 14 NC E O/P NC +5V
3
|
|
