|
Details, datasheet, quote on part number:QC6109
| |
Datasheet text preview:
MARCH 1994 QC6109/10 Series
DS3867-1.4
QC6109/10 Series
0.0015 to 30MHz QUARTZ CRYSTAL OSCILLATORS
The QC6109/10 Series Quartz Crystal Oscillators are specifically designed to give a wide range of available frequencies within a rugged DIL package for use in harsh environments or professional applications. Professional and Military temperature ranges are available in both HCMOS and TTL drive configurations.
FEATURES
I Full Military Temperature Range I DIL Package - 4 Pin I Rugged Design I TTL/HCMOS Available
ELECTRICAL SPECIFICATION
FREQUENCY RANGE Type Output Type Frequency Range Power QC6109/xx-xx HCMOS/TTL 0.0015 to <6 55 6-15 50 15-30 90 QC6110/xx-xx TTL 0.375 to <6 200 6-15 100 15-30 150
Units MHz mW
OUTPUT Type Output Type Voltage: Logic '1' Logic '0' QC6109/xx-xx HCMOS/TTL 0.9Vcc 0.1 Vcc 55:45 to 45:55 2 50 0.9Vcc 0.1Vcc 60:40 to 40:60 2 50 QC6110/xx-xx TTL 2.4 0.4 55:45 to 45:55 10 2.4 0.4 60:40 to 40:60 10 -
Units V V
Mark Space Ratio Fan Out: TTL Gates HCMOS (Max) Rise & Fall Times (Max) Between 1.5 & 3.5V Between 0.8 & 2.0V
pF
15 -
10 -
10
10
nSec nSec
1
QC6109/10 Series
FREQUENCY STABILITY: Table 1 Frequency Tolerance Over Temperature Range (ppm max) WRt Nominal Frequency ±50 ±100 5x10-10 ±5 ppm typical ±5 ppm ±2 ppm 4 mSec 5 ±0.5V See frequency stability - table 1.
Type Number QC6109 or QC6110 as selected /1A-1A /1A-2A
Operating Temperature Range °C -40 to +85 -55 to +125
Outline 4 pin 4 pin
Short Term Long Term With Supply With Load
Typical over 1 second Per year For a ±10% change in Vcc For 1 to 10 gate change
NOMINAL START UP TIME SUPPLY VOLTAGE OPERABLE TEMPERATURE RANGE
ENVIRONMENTAL SPECIFICATION
BUMP SEVERITY 4000 ±10 bumps at 390m/s2 peak acceleration, pulse duration 6ms in each direction of three mutually perpedicular axes. 10 to 60Hz 3.5 peak displacement 60 to 5000Hz 490m/s2 peak accn. 5 sweeps at 1 octave/min. in each of three mutually perpedicular axes (4hr 30mins. total). 0.5g2/Hz between 20Hz and 2kHz. Duration 30 mins. in each of three mutually perpedicular axes. 14700m/s2 peak acceleration for 0.5ms duration half sine pulse. 5 shocks in each direction of three mutually perpendicular axes.
VIBRATION SEVERITY (SINUSOIDAL)
VIBRATION SEVERITY (RANDOM)
SHOCK SEVERITY
ACCELERATION (STEADY STATE) Conditioning Test Only SOLDERABILITY CLIMATIC CATEGORY STORAGE TEMPERATURE 49000m/s2 steady acceleration for 1 min. duration in the Y1 direction. BS2011 test TA 55/125/56 -65°C to 150°C
2
QC6109/10 Series
MECHANICAL SPECIFICATION
WEIGHT (Typical) OUTLINE DRAWINGS 3.5 gms
Pin Connections 1 7 8 14 NC E O/P +5V
MARKING
The following information is indelibly marked on the top surface of each device and on each primary package: 1. GPS Logo 2. The nominal output frequency in 'kHz' or 'MHz' as appropriate 3. The type number 4. The date code in accordance with Clause 22 of BS9000: Part 1: 1981 5. The primary package is marked to indicate device static sensitivity 6. Customised marking is available on request
GENERAL NOTES
STATIC PRECAUTIONS All quartz crystal oscillators can contain devices which are deemed to be static sensitive. Full handling precautions must be followed at all times when dealing with these devices. Failure to do so may result in damage to the product. A useful guide is BS CECC 00015 : Part 1 : 1991, Protection of electrostatic sensitive devices.
3
|
|
