Details, datasheet, quote on part number: ZSR1000
PartZSR1000
CategoryPower Management => Regulators => Voltage Regulators
DescriptionVoltage Regulator
CompanyZetex Inc.
DatasheetDownload ZSR1000 datasheet
Cross ref.Similar parts: 78L12, AN78L10, HA178L10, KIA78L010, KIA78L10, LM78L10, TA78DL010, TA78L010, TA78L10, UA78L10
Quote
Find where to buy
 
  

 

Features, Applications
TO 12 VOLT FIXED POSITIVE LOCAL VOLTAGE REGULATOR

The ZSR Series three terminal fixed positive voltage regulators feature internal circuit current limit and thermal shutdown making the devices difficult to destroy. The circuit design allows creation of any custom voltage in the range to 12 volts. The devices are available in a small outline surface mount package, ideal for applications where space saving is important, as well as through hole TO92 style packaging. The devices are suited to local voltage regulation applications, where problems could be encountered with distributed single source regulation, ore ge ner a l vol t age applications. The ZSR Series show performance characteristics superior to other local voltage regulators. The initial output voltage is maintained to within 2.5% with a quiescent current of typically 350A. Output voltage change, with input voltage and load current, is much lower than competitive devices. The ZSR devices are completely stable with no external components. 10.0V 12.0V

FEATURES

to 12 Volt Output current to 200mA Tight initial tolerance Low quiescent current to 125C temperature range No external components Internal thermal shutdown Internal short circuit current limit

Input voltage Output Current(Io) Operating Temperature Storage Temperature to 150C Power Dissipation 780mW(Note 3)

1. The maximum operating input voltage and output current of the device will be governed by the maximum power dissipation of the selected package. Maximum package power dissipation is specified 25 C and must be linearly derated to zero Tamb=125C. 2. The following data represents pulse test conditions with junction temperatures as indicated at the initiation of the test. Continuous operation of the devices with the stated conditions might exceed the power dissipation limits of the chosen package. 3. Maximum power dissipation, for the SOT223 and SO8 packages, is calculated assuming that the device is mounted on a PCB measuring 2 inches square. 4. The shut down feature of the device operates if its temperature exceeds its design limit as might occur during external faults, short circuits etc. If the regulator is supplied from an inductive source then a large voltage transient, on the regulator input, can result should the shut down circuit operate. It is advised that a capacitor (1F or greater) should be applied across the regulator input to ensure that the maximum voltage rating of the device is not exceeded under shutdown conditions.

SYMBOL PARAMETER VO Output Voltage to 200mA CONDITIONS MIN. 2.78 2.736 TYP. 2.85 MAX. =5.0mA 0.1 mV/C 62 4.55 UNITS V rms dB V

Vin lq Vn Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage to 20V

Vin /VO Ripple Rejection Vin VO /T Input Voltage Required To Maintain Regulation Average Temperature Coefficient V O

SYMBOL PARAMETER VO Output Voltage to 200mA Vin lq Vn Line Regulation Load Regulation Quiescent Current to 20V

Quiescent Current Change to 20V Output Noise Voltage O =5.0mA

Vin /VO Ripple Rejection Vin VO /T Input Voltage Required To Maintain Regulation Average Temperature Coefficient V O

SYMBOL PARAMETER VO Output Voltage lq Vn Line Regulation Load Regulation Quiescent Current to 20V
Quiescent Current Change to 20V Output Noise Voltage O =5.0mA

Vin /VO Ripple Rejection Vin VO /T Input Voltage Required To Maintain Regulation Average Temperature Coefficient V O


 

Related products with the same datasheet
ZSR1000C
ZSR1000G
ZSR1000N8
ZSR1200
ZSR1200C
ZSR1200G
ZSR1200N8
ZSR285
ZSR300
ZSR300C
ZSR300G
ZSR300N8
Some Part number from the same manufacture Zetex Inc.
ZSR1000C Voltage Regulator
ZSR285C 2.85 to 12 Volt Fixed Positive Local Voltage Regulator
ZSR300 Voltage Regulator
ZSR570
ZSR600 Voltage Regulator
ZSR700
ZSR800 Voltage Regulator
ZSR850
ZSR900 Voltage Regulator
ZSRSeries 2.85 to 12v Fixed Positive Local Voltage Regulator
ZTR250 Fixed 2.5 3-terminal Voltage References
ZTX1047A NPN Low Sat Transistor
ZTX1048A
ZTX1049A
ZTX1051A
ZTX1053A NPN Med Power Transistor
ZTX1055A NPN High Voltage Transistor
ZTX1056A
ZTX1147A PNP Low Sat Transistor
ZTX1149A
ZTX1151A
Same catergory

LIS2L02AS : Power Controllers & Motor Drivers. Inertial SENSOR: 2AXIS - 2G/6G Linear Accelerometer.

LT1375 : Step-Down. LT1375, 1.2A, 500kHz Step-down W/Ext. SYNC. Constant 500kHz Switching Frequency Easily Synchronizable Uses All Surface Mount Components Inductor Size Reduced to 5H Saturating Switch Design: 0.4 Effective Supply Current: 2.5mA Shutdown Current: 20A Cycle-by-Cycle Current Limiting is current mode for fast transient response and good loop stability. Both fixed output voltage and adjustable parts.

PCF1252 : General Purpose. PCF1252-X Family; Threshold Detector And Reset Generator.

PT6343A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT6343, 2.5Vout 6A 12V-Input Adjustable Step-down Isr.

REG1117A-18 : . q FIXED AND ADJUSTABLE VERSIONS q 2.85V MODEL FOR SCSI-2 ACTIVE TERMINATION q OUTPUT CURRENT: REG1117: 800mA max REG1117A: 1A max q OUTPUT TOLERANCE: 1% max q DROPOUT VOLTAGE: REG1117: 1.2V max REG1117A: 1.3V max 1A q INTERNAL CURRENT LIMIT q THERMAL OVERLOAD PROTECTION q SOT-223 AND DDPAK SURFACE-MOUNT PACKAGES The is a family of easy-to-use three-terminal.

RT9227A : Switching->VRM Specified. = Synchronous Buck With Dual Fixed Linear Controllers ;; Power in Voltage = 5V ;; Output Volt. Range = 1.3V V 3.5V ;; VCC Voltage = 12V ;; Packages = SOP-24 ;; VRM = 8.4 ;;.

S7131AM : Voltage Detector. As Control Circuit of Battery-Backed Memory As Measure Against Erroneous Operations at Power On-Off As Resetting Function for the CPU-Mounted Equipment PC, Printer, VTR, Fax, C-TV etc. As Measure Against System Runaway at Instantaneous Break of Power Supply etc. Current Consumption is Low (ICCL=300 Typ. ICCH=30 Typ.) Resetting Output Minimum Guarantee.

SSRP130 : ASD for Telecom Wireline. Dual Asymmetrical Overvoltage Protection For Telecom Line - (ASD).

TC1240 : The TC1240 is a Doubling CMOS Charge-pump Voltage Converter in a Small 6-Pin SOT-23A Package.

TPS3128E15 : . typical applications Minimum Supply Voltage 0.75 V Supply Voltage Supervision Range: V (TPS3125 Devices Only) Other Versions on Request Power-On Reset Generator With Fixed Delay Time 180 ms Manual Reset Input (TPS3123/5/6/8) Watchdog Timer Retriggers the RESET Output at VDD VIT Supply Current 14 A (Typ) SOT235 Package Temperature Range. to 85C.

UWR-12/420Series : 5w DC/DC Converter. Small size, x 0.45" Full 5 Watts output power No external components required Drop-in replacements for many standard, x 1" DC/DC's Wide input voltage ranges: or 15V outputs Guaranteed efficiencies to 80% Fully regulated and isolated (1000Vdc guaranteed) Output overvoltage protection and current limiting to +95oC operating temperature Shielded cases.

XC6365Series : . GElectronic Information Organizers GPalmtops GCellular and portable phones GPortable Audio Systems GVarious Multi-function Power Supplies NOutput Voltage Range : 1.5~6.0V(2.5%) NOscillator Frequency : 300kHz(15%) NMaximum Duty Ratio : 100% NHigh Efficiency NSOT-25 Package : 92% NPWM/PFM Switching Control (XC6366) The XC6365/66 series are multi-functional.

VRAH-12F330 : NON-ISOLATED DC/DC CONVERTERS The Bel xRAH-12Fxx0 series are part of the low cost non-isolated dc/dc converter series. These converters are available in a range of output voltages from 1.0 V to 3.3 V. It is packaged in a compact, overmolded package rated at 12 A. The output is closely regulated and the efficiency of 3.3 V output module is typically.

LTC4446 : High Voltage High Side / Low Side N-Channel MOSFET Driver The LTC4446 is a high frequency high voltage gate driver that drives two N-channel MOSFETs in a DC/DC converter with supply voltages up to 100V. The powerful driver capability reduces switching losses in MOSFETs with high gate capacitance. The LTC4446s pull-up for the top gate driver has a peak.

NCV8405 : Self-Protected Low Side Driver With Temperature And Current Limit NCV8405 is a three terminal protected Low-Side Smart Discrete device. The protection include overcurrent, overtemperature, ESD and integrated Drain-to-Gate clamping for overvoltage protection. This device is suitable for harsh automotive environments..

FSFA2100 : 450W Half-bridge Asymmetric Power Switch The growing demand for higher power density and low profile in power converter designs has forced designers to increase switching frequencies. Operation at higher frequencies considerably reduces the size of passive components, such as transformers and filters. However, switching losses have been an obstacle.

AAT 2868 : CABC Compatible 4 Channel Backlight Driver With Dual LDO Regulators The AAT2868 is a low-noise, constant-frequency charge pump DC/DC converter that uses a dual-mode load switch (1x) and fractional (1.5x) conversion to maximize efficiency for white LED Content Adaptive Brightness Control (CABC) applications. The AAT2868 is capable of driving 4 white.

LD1117AXX : Linear Regulators Datasheet Low drop fixed and adjustable positive voltage regulators.

PT7M7812XTA : P Supervisor Circuits The PT7M7xxx family microprocessor (P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..

 
0-C     D-L     M-R     S-Z