|
Details, datasheet, quote on part number:JP503
| |
| Part: | JP503 |
| Category: | RF & Microwaves => Couplers |
| Description: | Description = Pico Xinger Hybrid Couplers ;; Size LXWXH = 0.250" X 0.200" X 0.054" ;; Packaging = Surface Mount ;; Frequency MHZ = 2000-2300 ;; Power Handling Watts = 25 |
| Company: | Anaren Microwave |
| Datasheet: | Download JP503 datasheet File size : 299 kB |
| Request For quote: | Find where to buy JP503
|
| |
Datasheet text preview:
Model JP503
Rev. A
Hybrid Couplers 3 dB, 90°
Description
The JP503 Pico Xinger is a low profile, miniature 3dB hybrid coupler in an easy to use surface mount package designed for W-CDMA and other 3G applications. The JP503 is designed for balanced amplifiers, variable phase shifters and attenuators, LNAs, signal distribution and is an ideal solution for the ever-increasing demands of the wireless industry for smaller printed circuit boards and high performance. Parts have been subjected to rigorous qualification testing and units are 100% tested. They are manufactured using materials with x and y thermal expansion coefficients compatible with common substrates.
ELECTRICAL SPECIFICATIONS** Features:
· · · · · · · · · 2.0 2.3 GHz. 3G Frequencies Low Loss High Isolation 90o Quadrature Surface Mountable Tape And Reel New Pico-Package 100% Tested Frequency
GHz
Isolation
dB Min
Insertion Loss
dB Max
VSWR
Max:1
2.0 2.3 Amplitude Balance
dB Max
20 Phase Balance
Degrees
0.30 Power
Ave. CW Watts
1.20 JC
șC/Watt
Operating Temp.
șC
± 0.25
±3
25
27.5
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 nominal impedance. Specifications subject to change without notice.
Outline Drawing
Top View (Near-side) .250±.010 [6.35±0.25] .054±.005 [1.38±0.13] Pin 2
Side View
Bottom View (Far-side) .020±.004 TYP [0.51±0.10] Pin 2 Pin 1
Pin 1
GND Pin 4 Denotes Array Number
.200±.010 [5.08±0.25]
GND Pin 3
.040±.008 [1.01±0.20]
Pin 3
.040±.008 [1.01±0.20]
Pin 4
Dimensions are in Inches [Millimeters] JP503 Rev A Mechanical Outline
Part Is Symmetric About All Axis
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Model JP503
Rev. A
Typical Performance: 1.9 GHz. to 2.4 GHz.
Coupling JP503
-2.6
Return Loss JP503
0
-10
-2.9
R e tu rn Loss (dB)
C o u p l i n g (dB)
-20
-3.2
-30
-3.5
-40
-3.8 1900
2000
2100
2200
2300
2400
-50 1900
2000
2100
2200
2300
2400
Frequency (MHz)
Isolati on JP503
-10
-8 7
Frequency (MHz)
Phase Balance JP503
-8 8
P h a s e Balance (D e g r e e s )
2000 2100 2200 2300 2400
-20
Is o l a ti o n (dB)
-8 9
-30
-9 0
-9 1
-40
-9 2
-50 1900
-9 3 190 0 2 000 21 00 22 00 230 0 2 400
Frequency (MHz)
Frequency (MHz)
AMPLITUDE BALANCE 3dB hybrids are a type of backward wave coupler. In the design of these couplers, the even mode impedance was chosen to `critically couple' or slightly `over couple' at mid band to maximize performance and bandwidth. The amplitude balance specification is defined as the difference (in dB) of the signals at the COUPLED port output and the DC port output, when compared to the average output level. PHASE BALANCE In theory, output ports of a backward wave hybrid coupler remain in perfect phase quadrature independent of frequency. In practice, factors associated with the manufacturing processes slightly degrade performance. The specification is typical two to three degrees maximum although in practice, phase balance is statistically better than specified (<1o).
VSWR & ISOLATION Similar to phase balance, the VSWR and isolation of a coupler are theoretically perfect; where the input and output ports are perfectly matched and no power is coupled to the isolated port. In practice, factors associated with the design and manufacturing processes limit VSWR and isolation. The significant limitations are associated with limitations of building perfect 50 transitions at the input and output ports of the device. INSERTION LOSS Coupler insertion loss is defined as the difference of the input power from the sum of the output power. In practice, loss is typically 0.20 dB. Specification limits are somewhat higher due to imperfect test conditions;
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
Available on Tape and Reel For Pick and Place Manufacturing.
Model JP503
Rev. A
as the couplers must be tested in fixtures which negatively affect results.
Available on Tape and Reel For Pick and Place Manufacturing.
USA/Canada: Toll Free: Europe:
(315) 432-8909 (800) 544-2414 +44 2392-232392
|
|
