Details, datasheet, quote on part number: VCS12AXT
PartVCS12AXT
CategoryTiming Circuits => Oscillators => VCXO (Voltage Controlled Crystal Oscillators)
Description3.3V 7.5 X 5mm Hcmos Ceramic SMD
CompanyFox Electronics
DatasheetDownload VCS12AXT datasheet
  

 

Features, Applications

FEATURES
OPTIONS

3.3V Operation Many Stability/Pullability Options HCMOS Output ~ +85ºC Option ('R' Version) Enable/Disable Tape and Reel (2,000 pcs. STD) Pb Free

Frequency Range (FO ) Storage Temperature Range (TSTG) Supply Voltage (VDD ) Control Voltage (VC) Input Current (I DD MHz ~ 45.000 MHz ~ 77.760 MHz Output Symmetry (50% V DD) Rise Time ~ 90% VDD) (TR) Fall Time ~ 10% VDD) (TF) Output Voltage (VOL) (VOH ) Output Current (I OL) OH ) Output Load (HCMOS) Start-up Time (TS) Enable/Disable Time 2 Frequency Linearity Modulation Bandwidth

Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, vibration, and 1.65V. An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. 3 Available on an individual inquiry basis. 4 Custom specifications from to 77.760 MHz available on an individual inquiry basis. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 6) and GND (Pin 3) to minimize power supply line noise. Note: An alternate pin connection with E/D on pin #5 is available. All specifications subject to change without notice. Rev. 02/10/03

ENABLE / DISABLE FUNCTION INH (Pin 2) OUTPUT (Pin 4) OPEN 2 ACTIVE '1' Level VIH 70% VDD ACTIVE '0' Level VIL 30% VDD High Z

5570 Enterprise Parkway Fort Myers, Florida 33905 USA +001(239)693-0099 FAX +001(239)693-1554 http://www.foxonline.com


 

Related products with the same datasheet
VCS12AXTR3
VCS15AXT
VCS15AXTR
VCS20AXT
VCS20AXTR
VCS22AXT
VCS22AXTR3
VCS25AXTR
Some Part number from the same manufacture Fox Electronics
VCS12AXTR3 3.3V 7.5 X 5mm Hcmos Ceramic SMD
VCS25AXT 3.3V 7.5 X 5mm Hcmos Ceramic SMD (Standard)
VCS25AXTR 3.3V 7.5 X 5mm Hcmos Ceramic SMD
VCXO-C 5.0V 14-Pin Dip Hcmos Thru-hole
VCXO-D 3.3V 14-Pin Dip Hcmos Thru-hole
FQ5032 • All Quartz• Pb Free & RoHS Compliant• 5.0 x 3.2 x 0.80mm• Fundamental to 48 MHz• Ultra Low Profile
FQ6035 • All Quartz• Pb Free & RoHS Compliant• 6.0 x 3.5 x 0.90mm• Fundamental• Ultra Low Profile
FQ7050 • All Quartz• Pb Free & RoHS Compliant• 7.0 x 5.0 x 1.0mm• Fundamental• Ultra Low Profile
FQ1045A • All Quartz• Pb Free & RoHS Compliant• 10.0 x 4.5 x 1.1mm• Fundamental• Ultra Low Profile
FX252B • Pb Free• 2.5 x 2.0 x 0.6mm• Fundamental to 54 MHz
FX325BS
FX425
FOX465 • 6.5 x 4.0 x 2.0mm• 1.5 ~ 6V Operation• HCMOS
F310 • 3.2 x 2.5 x 1.1mm• 1.8V Operation• HCMOS• Low Current StandbyFunction (10µA MAX)
F340 • 3.2 x 2.5 x 1.1mm• 2.5V Operation• HCMOS• Low Current StandbyFunction (10µA MAX)
F4700 • Pb Free• 7.5 x 5 x 1.5mm• 3.3V• LVDS Output
F4710 • Pb Free• 7.5 x 5 x 1.5mm• 2.5V• LVDS Output
RFX250 • Pb Free• 7.5 x 5 x 1.4mm• 2.5V• LVE-PECL XO• Complementary Output
FCPAXT • 7.0 x 5 x 1.8mm• 3.3V• LVE-PECL XO• E/D
FVXO-LC52 LVDS 5 X 3.2mm 2.5V V C X OLVDS 5 x 3.2mm 2.5V V C X O
F3355R Miniature SMD Hcmos Oscillator
Same catergory

B-8Series : RF. Dual-in-line Package (dip) Tcxos. s Output Options = LS TTL, to 160 MHz AC = CMOS AC, to 160 MHz HC = HCMOS, to 160 MHz = +4.0 dBm 50 ohm, to 80 MHz EH = ECL 10 KH, to 160 MHz = ±1.0 PPM = ±2.0 PPM = ±3.0 PPM = ±5.0 PPM +85°C 5.0 Vdc ±5% (EH = -5.2 Vdc) <1.0 PPM for ±5% >15 PPM to +5.0 Vdc X 10-8 cc/second Supply Voltage Stability Trim Range Tuning Voltage Seal Screening Options.

CDC330 : General Purpose/. Clock Driver With 3-state Outputs. Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and Outputs Two Banks Distribute One Clock Input to Three Same-Frequency Clock Outputs One Bank Distributes One Clock Input to Four Half-Frequency Clock Outputs Internal Power-Up Circuit Distributed VCC and Ground Pins Reduce Switching Noise.

CDC857-2DGG : PLL-Based Clock Buffers (Zero-Delay). ti CDC857-2, Phase-lock Loop Clock Drivers.

CDCVF2505D : PLL-Based Clock Buffers (Zero-Delay). ti CDCVF2505, PLL Clock Driver For Synch. DRAM & Gen. Purp. Apps W/spread Spectrum Compatibility, Power Down Mode.

CY2314ANZSC-1 : High Performance Clock And Data Buffers Without PLL. 14 Output, 3.3V SDRAM Buffer for Desktop PCs with 3 DIMMs One input to 14 output buffer/driver Supports up to three SDRAM DIMMs Two additional outputs for feedback Serial interface for output control Low skew outputs to 100-MHz operation Multiple VDD and VSS pins for noise reduction Dedicated OE pin for testing Low EMI outputs 28-pin SOIC (300-mil).

CY2SSTV16859 : JDIMMS. Memory Buffer And Register For DDR Sdram Devices. Differential clock inputs to 280 MHz Supports LVTTL switching levels on the RESET# pin Output drivers have controlled edge rates, so no external resistors are required. Two KV ESD protection Latch-up performance exceeds 100 mA per JESD78, Class II 64-pin TSSOP/JEDEC package availability JEDEC supported The CY2SSTV16859 operates from a differential clock.

FPXO-013772 : Crystal Oscillator 24.576000mhz.

HD151TS201SS : HD151TS series for PCMB. Mother Board Clock Generator for Intel P4 Chipset The HD151TS201 is Intel CK408 type high-performance, low-skew, low-jitter, PC motherboard Clock generator. It is specifically designed for Intel Pentium®4 chipset. 3 differential pairs of current mode control CPU clock 7 PCI clocks and 3 PCIF clocks @3.3V, 33.3MHz typ. 1 copy of 48MHz for USB @3.3V 1 copy.

IDT5V2310 : The IDT5V2310 is a High Performance, Low Skew Clock Buffer Thatoperates up to 200MHz. Two Banks of Five Outputs Each Provide Low Skewcopies of Clk. Through The Use of Control Pins 1G And 2G, The Outputs Ofbanks 1Y(0:4) And 2Y(0:4) CAN be Placed in a Low State Regardless of CLKinput. The Device Operates in 2.5V And 3.3V Environments. The Built-inoutput.

LXO-1 : Leaded Oscillators. CMOS Compatible 3.3V or 5V Very Low Current Tri-state Output (optional) High Accuracy And Stability;; Package = 4-pin Dip.

NBSG53AMNR2 : Divider. 2.5V/3.3V Sige Selectable Differential Clock And Data D Flip-flop/clock Divider With Reset And Ols, Package: Qfn, Pins=16.

RF5C15 : Clock Circuits. 18pin Sop.

TFR433E : SAW Devices (Surface Acoustic Wave). Application = Stable Oscillators ;; Center Frequency = 433.92 MHZ ;; 3 DB =   ;; Pass Band Ripple =   ;; Insertion Loss = 1.8dB ;; Group Delay Ripple =   ;; Package = 5 MM X 5 MM LCC.

V940ME02 : Package Style = MINI-14S-L ;; Frequency (MHz) = 5220 to 5420 ;; N@10KHz (dBc/Hz) = -83 ;; Tuning Voltage (Vdc) = 0.50 to 4.50 ;; Tuning Sensitivity (MHz/V) = 108 ;; Power (dBm) = -1.00 ± 3.00 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 12.

VXD4 : Crystal Oscillators. Package Options = UM-4 Frequency Range 10.0 MHz to 200.00 MHz Standard Frequencies Mode See Standard Frequency Table 1 = Fundamental to 55 MHz) = 3rd Overtone to 160 MHz) = 5th Overtone to 200 MHz) = ±100 PPM = ±50 PPM = ±100 PPM = ±50 PPM = ±25 PPM = ±10 PPM 0 = Series Resonant pF ±25 PPM at +25°C Equivalent Series to 55 MHz 60 Resistance to 80 MHz to 180 MHz to 200 MHz 120 Shunt.

ZL30414 : OC-192 STM-64 SONET/SDH Clock Multiplier PLL The ZL30414 is an analog phase-locked loop (APLL) designed to provide jitter attenuation and rate conversion for SDH (Synchronous Digital Hierarchy) and SONET (Synchronous Optical Network) networking equipment. The ZL30414 generates very low jitter clocks that meet the jitter requirements of Telcordia GR-253-CORE.

CF5074A : VCXO Module IC With Built-in Varicap The CF5074A is VCXO module IC with built-in varicap diodes. The integrated varicap diode BiCMOS pro- cess allows the device to be fabricated on a single chip. A newly developed oscillator circuit reduced drive level of crystal and wide pullrange. A VCXO module can be constructed with just the connection of a crystal.

YH1460 : YH1460/1461 Series OCXO 10.0 MHz to 100.0 MHz YH1460 - Sinewave, +7dBm min. into 50 ohms YH1461 - Squarewave, ACMOS.

 
0-C     D-L     M-R     S-Z