|
Details, datasheet, quote on part number:YF-25
| |
| Part: | YF-25 |
| Category: | RF & Microwaves => Dividers => Power Dividers |
| Description: | Description = Power Dividers, In-phase 4 & 6-Way ;; Freq. Range = 0.5-18 GHZ |
| Company: | MCE KDI Integrated Products |
| Datasheet: | Download YF-25 datasheet File size : 250 kB |
| Request For quote: | Find where to buy YF-25
|
| |
Datasheet text preview:
IN-PHASE 4-WAY
DIVIDERS/COMBINERS, POWER
SMA/TYPE N 0.5-18 GHz GENERAL SPECIFICATIONS
Frequency Range: RF Impedance: RF Power: 0.5 to 18.0 GHz 50 Ohms The power handling capability for load VSWR 's less than 1.50 is 1 watt CW and 1 kW peak for frequencies up to 2.0 GHz, and 400 mW CW and 0.4 kW peak for frequencies from 2.0 GHz to 18.0 GHz. 55°C to +85°C SMA or Type N Female
SERIES YF MODEL D418M
Operating Temperature: Connectors:
0.38[9,7]
C A/2
0.10[2,54]
1.00 [25,4] A/2
C 0.13[3,3]
IN B/2
B IN OUT OUT OUT OUT 0.125[3,18] DIA. THRU 2 MTG. HOLES
B/2
B 0.093[2,36] DIA. THRU 2 MOUNTING HOLES
OUT 0.38[9,7] TYP. SMA FEMALE TYP.
OUT
OUT
OUT
N FEMALE TYP.
1.00 [25,4] TYP. A
0.50 [12,7]
0.74 [18,8] TYP.
A
E TYP.
D
FIGURE 1 SERIES YF
FIGURE 2 SERIES YF-N
Outline 1 2 3 4 5 6 7 8 9 10 11 12
A in [mm] 2.00 [50,8] 2.60 [66,0] 2.00 [50,8] 1.60 [40,6] 3.20 [81,3] 1.60 [40,6] 4.00 [101,6] 4.00 [101,6] 4.00 [101,6] 4.00 [101,6] 4.00 [101,6]
B in [mm] 2.25 [57,2] 2.75 [69,9] 1.75 [44,5] 2.00 [50,8] 2.50 [63,5] 1.50 [38,1] 1.75 [44,5] 2.75 [69,9] 1.25 [31,8] 2.00 [50,8] 1.00 [25,4]
C in [mm] 1.800 [45,72] 2.400 [60,96] 1.800 [45,72] 1.400 [35,56] 3.000 [76,2] 1.400 [35,56] 3.750 [95,25] 3.750 [95,25] 3.750 [95,25] 3.750 [95,25] 3.750 [95,25]
D in [mm] 0.25 [6,4] 0.25 [6,4] 0.25 [6,4] 0.20 [5,1] 0.20 [5,1] 0.20 [5,1] -- -- -- -- --
E in [mm] 0.50 [12,7] 0.70 [17,8] 0.50 [12,7] 0.40 [10,2] 0.40 [10,2] 0.40 [10,2] -- -- -- -- --
ELECTRICAL PERFORMANCE 4 WAY TYPE
Model No. SMA YF-23 YF-25 YF-51 YF-28 YF-54 YF-30 YF-38 YF-55 YF-45 Type * N YF-23N YF-25N YF-51N YF-28N YF-54N YF-30N YF-38N YF-55N YF-45N Frequency Maximum Range In/Out GHz VSWR 0.5-1.0 1.25/1.20 0.75-1.5 1.25/1.20 0.5-2.0 1.40/1.30 1.0-2.0 1.30/1.20 1.0-4.0 1.45/1.35 1.5-3.0 1.30/1.20 2.0-4.0 1.30/1.20 2.0-8.0 1.50/1.40 4.0-8.0 1.40/1.30 1.0-1.5 1.80/1.35 1.5-2.0 1.80/1.35 2.0-4.0 1.80/1.45 4.0-8.0 1.80/1.45 8.0-12.0 1.70/1.45 12.0-16.0 1.70/1.45 16.0-18.0 1.80/1.45 Maximum Insertion Loss dB 0.5 0.5 1.0 0.5 1.0 0.6 0.8 1.2 1.0 0.7 0.8 1.0 1.2 1.4 1.8 2.0 Minimum Isolation dB 20 20 18** 20 18 20 18 16 18 10 14 17 17 17 15 12 Phase Amplitude Balance Balance Degrees dB 3 0.3 3 0.3 4 0.4 3 0.3 4 0.4 3 0.3 3 0.3 5 0.5 5 0.5 1 0.2 2 0.2 4 0.3 6 0.4 10 0.5 13 0.6 15 0.6 Out- Outline line SMA N 1 7 2 8 2 8 3 7 4 9 5 7 6 7 1 10 6 11
D418M
--
12
--
Drawing on Request
* Units with Type N connectors: up to 4GHz multiply VSWR's by 1.05 and subtract 2 dB from isolation. Above 4GHz multiply VSWR's by 1.10 and subtract 3dB from isolation. ** Greater than 30 dB over most of the frequency band.
KEY: Inches[Millimeters] .XX ±.03 .XXX ±.010 [.X ±0.8 .XX ±0.25]
60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 · Fax: 973-884-0445 email: sales@mcekdi-integrated.com See us on the web @ www.mcekdi-integrated.com
11-5-02
4 WAY
DIVIDER/COMBINERS, POWER
ELECTRICAL SPECIFICATIONS
Model:
Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperature:
6.00[152,4] .38 [9,7] 1.00[25,4] TYP .59 [14,99] RF OUT J4 J3 J2 J1 PRESS IN TYPE N FEM MATES WITH N MALE CONN PER MIL-C-39012 5 PLS
D354KS
Type N 860-900 MHz 1.30:1 Maximum 20 dB Minimum 6.5 dB Maximum 50mW Maximum into each port ±0.3 dB Maximum ±3.0° Maximum 30° C to +70° C
.50 [12,7]
2.00[50,8]
3.00 [76,2]
KDI 64537 D354KS D/C
2.75 [69,9]
.190[4,83] Ø THRU 4 PLS. .13 [3,30] 5.75[146,1]
.13 [3,30]
.75 [19,1]
.80 [20,3]
.50[12,7] MAX. 5 PLS
2.875[73,03] 2.625[66,68] .13 [3,30] .13 [3,30]
ELECTRICAL SPECIFICATIONS
Model:
Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperature:
.38[9,65] 5 PLS
D349LS
SMA 800-900 MHz 1.3:1 Maximum 20 dB Minimum 0.5 dB Maximum 50mW Maximum into each port ±1 dB Maximum ±2.0° Maximum 30° C to +70° C
4.00 [101,6]
.50[12,7] 1 1.00[25,4] 2 1.00[25,4] 3 1.00[25,4] 4 2.00 [50,8]
KDI 64537 D349LS D/C
RF OUT
3.75 [95,3]
.166[4,22] DIA. THRU 4 PLS
MATES WITH SMA MALE CONN PER MIL-C-39012 5 PLACES
.125[3,18] DIA. 4 MTG. HOLES
ELECTRICAL SPECIFICATIONS
Model:
Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: Amplitude Balance: Phase Balance: RF Power: Operating Temperature:
.50[12,7] .25[6,4] .13[3,30] .13[3,30] .27[6,86]
2.50[63,5] 2.240[56,9]
D307MS
SMA 824-925 MHz 1.2:1 Maximum 20 dB Minimum 6.3 dB Maximum (inc. div. loss) ±0.1 dB Maximum ±2° Maximum 4.0 Watts CW Total @ Input 30° C to +70° C
.50 [12,7] 1.00[25,4] J2
INPUT J1 KDI 64537 D307MS D/C J3 J4 J5 1.740 [44,2] 2.00 [50,8]
MATE WITH SMA MALE CONN PER MIL-C-39012 5 PLACES
1.50[38,1] 2.00[50,8]
KE YInches[Millimeters] .XX ±.03 .XXX ±.010 [.X ±0.8 .XX ±0.25] :
10/98
An MCE Company
CORPORATION
TRIANGLE
60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 · Fax: 973-884-0445 E-Mail: kdisales@aol.com See us on the web @ www.kditriangle.com
4 WAY
DIVIDER/COMBINERS, POWER
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperture: D331MS Type N 800-960 MHz Out 2.0:1 Maximum--unterminated input 1.6:1 Maximum--terminated input 15 dB Minimum output to input 20 dB Minimum output to output 8.0 dB Maximum (incl. divide loss) 2 Watts Maximum ±0.5 dB Maximum ±2° Maximum 30° to +70°C
.25 [6,4] .88 [22,35] 2.85 [72,4] KDI 64537 D331MS D/C 4.00[101,6] 3.500[88,9] 2.00[50,8] .59 [14,99] .270[6,86] DIA. THRU 2 MTG HOLES .750 [19,1]
.69[17,53] TYP 6 PLS
MATES WITH TYPE`N`MALE CONN PER MIL-C-39012 5 PLS .375[9,53] TYP 2 MTG HOLES 1.000 [25,4] 3.000[76,2] .375[9,53] 5 CONN`S
M4x0.7 LOCKING INSERT, 2 PLCS MTG SCREW SHALL NOT EXTEND MORE THAN .20[5,1] INTO COMPONENT, C'SINK 90° TO .220[5,59] DIA.
.005 DIA M
GENERAL INFORMATION
1.00 [25,4] J3 J4 J5
PRESS IN TYPE SMA FEM MATES WITH SMA MALE CONN PER MIL-C-39012 4 PLS. .50 [12,7]
.80[20,3] MATES WITH BNC MALE CONN PER MIL-C-39012 .67[17,02] MAX. .50 [12,7]
PRESS IN `N' FEM CONN MATES WITN `N' MALE PER MIL-C-39012 .26[6,60]
4.00[101,6] .65 [16,51] .65[16,51] TYP 3 PLS
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: VSWR: INS Loss: Isolation: D366KS See Outline 800900 MHz 1.35:1 Maximum 6.6 dB Maximum 24.0 dB Minimum J2-J3, J4-J5 40 dB Minimum (Coupler) J1-J6 29 dB Minimum All Other Combiner Combinations 20 ± .5 dB ±0.5 dB Maximum ±2° Maximum 2 Watts Maximum 30° to +70°C
3.00[76,2]
J5
J4
J3
J2
J6 1.00[25,4]
KDI 64537 D36KS D/C
.190[0,483] DIA THRU 4 PLS .13[3.30] 3.750[95,3] .59[14,99]
Coupling: Amplitude Balance: Phase Balance: RF Power: Operating Temperture:
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: Insertion Loss: Isolation: VSWR: Amplitude Balance: Phase Balance: RF Power: Operating Temperture: Housing Material:: D317NS SMA 8002000 MHz 1.2 Maximum above 6 dB 30 dB typ. 23 dB Minimum In: Out:: 1.25 Maximum typ. 1.15 Maximum typ.
1.50 [38,1] RF OUT .58 [14,7] .29 [7,4] .20 [5,1] 1.50 [38,1] 3.00 [76,2]
3.00 2.600 [76,2] [66,04]
RF IN
0.3 dB Maximum ±2° Maximum +20 dBm Maximum 30° to +70°C Metalized Plastic
.12[3,1] DIA. HOLES 2 PLS. RF OUT
KE YInches[Millimeters] .XX ±.03 .XXX ±.010 [.X ±0.8 .XX ±0.25] :
An MCE Company
CORPORATION
TRIANGLE
60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 · Fax: 973-884-0445 E-Mail: kdisales@aol.com See us on the web @ www.kditriangle.com
J1 J1 2.750[69,91] .13 [3.30] 1.00 [25,4]
50 B J1 20 dB Coupler N J6
J2
The Model D366KS includes an equal four way power divider with Type N input and 4 SMA outputs. An isolated monitor port directional coupler with a BNC output connector is provided with a closely calibrated 20dB coupling value. Stripline construction and KDI high power Berrylium Oxide resistors employed in the design can readily be adapted to new custom applications.
SCHEMATIC
2 Way Div
2 Way Div
2 Way Div
S J2
S J3
S J4
S J5
MATES WITH SMA MALE CONN (5) PER MIL-C-39012 .29 [7,4]
KDI 64537 D317NS S/N D/C
RF OUT
.56 [14,2] 1.19 [30,2] 1.81 [46,0] 2.44 [62,0]
RF OUT
10/98
6 WAY
DIVIDERS/COMBINERS, POWER
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperture: D315MS SMA 800-900 MHz 1.3:1 Maximum 24 dB Minimum 15.5 dB ± 0.25 dB 30 dBm Maximum @ (J1) Port ± 0.5 dB Maximum ± 3° Maximum 30° to +70°C
2.00 [50,8] J7 J6 J5 KDI 64537 D315MS D/C J4 J3 J2 J1 .27[6,86] TYP 7 PLACES .50 [12,7]
SCHEMATIC DIAGRAM
J7 J6 J5 J4 J3 J2 J1
.56 [14,22]
.63[16,0] (5) PLACES
.75 [19,1]
.25 [6,4] MATE WITH SMA MALE CONNECTOR PER MIL-C-39012 (7) PLACES
.20 [5,1]
4.600[116,8] 5.00[127,0]
#6-32 UNC-2B ACCEPT #6-32 UNC-2A X .31[7,87] (2) PLACES
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: Insertion Loss above 7.8 dB: Isolation: VSWR: RF Power: D365MS SMA 400-2000 MHz 1.5 dB 14 dB Minimum 1.35:1 Maximum 1 Watt Maximum @ Input Port 100 milliwatts Maximum/Port as a Combiner ± 0.7 dB Maximum ± 5° Maximum 30° to +70°C
.12 [3,05]
5.750[146,1] 3.00[76,2] MATES WITH SMA MALE CONNECTOR PER MIL-C-39012 7 PLCS
0.125[3,18] DIA 2 PLS
KDI 64537 D365MS S/N D/C
2.000 [50,8]
4.00 [101,6]
Amplitude Balance: Phase Balance: Operating Temperture:
.50 [12,7]
1.00 [25,4] TYP .56 [14,22]
.24 [6,10]
6.00[152,4]
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperture: D308MS SMA 824-925 MHz 1.2:1 Maximum 20 dB Minimum 8.2 dB Maximum (incl. div. loss) 4.0 Watts CW Total @ input ± 0.5 dB Maximum ± 3° Maximum 30° to +70°C
.125[3,18] DIA. 4 MTG. HOLES 3.50[88,9] 3.240[82,3] .13[3,3] .13[3,3]
.50[12,7] .25[6,4]
.27[6,86] INPUT J1 KDI 64537 D308MS D/C J2 J3 J4 J5 J6 J7
1.740 [44,2]
2.00 [50,8]
.50 [12,7] 1.00[25,4] 1.50[38,1] 2.00[50,8] 2.50[63,5] 3.00[76,2]
MATE WITH SMA MALE CONN PER MIL-C-39012 7 PLACES
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperture: D357KS Type N 800-960 MHz 1.35:1 Maximum all ports 20.0 dB Minimum 9.0 dB Maximum (incl. divide loss) 5 W Maximum ± 0.5 dB Maximum ± 3° Maximum 30° to +70°C
6.00[152,4] .25 [6,4] 3.00[76,2] 5.500[139,7] .270[6,86] DIA. THRU 2 MTG HOLES CV90-14333-1 REL 12 MFG KDI 64537 D357KS D/C .59 [14,99] 1.000 [25,4] 5 PLS MATES WITH TYPE`N`MALE CONN PER MIL-C-39012 7 PLS .38[9,7] TYP 1.00 [25,4] .75 [19,1]
.88 [22,35] 1.62 [41,15]
.50 [12,7]
2.000[5,1] 4.000[101,6]
M4x0.7[17,8] LOCKING INSERT, 3 PLCS MTG SCREW SHALL NOT EXTEND MORE THAN .20[5,1] INTO COMPONENT CSINK 90° TO .220[5,59] DIA.
KEY: Inches[Millimeters] .XX ±.03 .XXX ±.010 [.X ±0.8 .XX ±0.25]
10/98
An MCE Company
CORPORATION
TRIANGLE
60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 · Fax: 973-884-0445 E-Mail: kdisales@aol.com See us on the web @ www.kditriangle.com
6 WAY
DIVIDERS/COMBINERS, POWER
SUBASSEMBLY--WITH VARIABLE ATTENUATORS GENERAL INFORMATION
The Model D387LS power divider subassembly incorporates unique level set adjustable attenuators, each with a minimum adjustment range of 0-12dB. Resistor isolated Wilkinson power dividers provide for high isolation between signal paths, and include a power monitor function. The stripline construction provided throughout can be readily modified for other custom applications.
.44 [11,18] .61 [15,49] ATTENUATOR TRIM 6 PL
.90 [22,9]
.60[15,2] TYP.
MATES WITH TYPE `N' MALE CONNECTOR PER MIL-C-39012 6 PL 7.68[195,07] MAX. 7.250[184,2]
.37[9,40]
1.20[30,5] TYP.
ELECTRICAL SPECIFICATIONS
D387LS Type N Output SMA Input BNC Monitor Port Frequency Range: 0.865 0.900 GHz Insertion Loss: 14.5 ±0.5 dB at 0 dB Trim 3.0 +.5 0 dB Attenuator Trim: 0 to 12 dB Minimum (Screwdriver) RF Power: +17 dBM Isolation: 20 dB Minimum at 0 dB Trim VSWR (All Ports): 1.60:1 Maximum Operating Temperature: 30° to +70°C. Model: Connectors:
DIV 3 WAY
J7
VAR ATTEN VAR ATTEN
J6
J5
J4
J3
J2
ATTEN ATTEN ATTEN
J7 J6 J5
3.00 [76,2] 2.750 [69,9]
DIV 2 WAY J1
DIV 2 WAY DIV 3 WAY
VAR ATTEN
KDI 64537 D387LS D/C
VAR ATTEN VAR ATTEN
ATTEN ATTEN ATTEN
J4 J3 J2
J1
3 DB MON
MON
VAR ATTEN
2.88[73,15] 5.38[136,65] MATES WITH TYPE `SMA' MALE CONNECTOR PER MIL-C-39012 MATES WITH TYPE `BNC' MALE CONNECTOR PER MIL-C-39012
.19[4,83] DIA, 4 PLS
ELECTRICAL SPECIFICATIONS
Model: Connectors: Frequency Range: VSWR: Isolation: Insertion Loss: RF Power: Amplitude Balance: Phase Balance: Operating Temperature: D390MS SMA/N 824-894 MHz 1.2:1 Maximum 20.0 dB Minimum 8.5 dB Maximum (Includes divide loss) 500 milliwatts Maximum @ Combined Port ±0.2 dB Maximum ±0.2 Maximum 30° to +70°C.
.25 [6,4] 3.00[76,2]
6.00[152,4] 5.500±.005[140,0±0,13] .270[6,86] DIA. THRU 2 MTG. HOLES J1 KDI 64537 D390MS D/C .38 [9,7] .75 [19,1] MATES WITH SMA MALE CONN PER MIL-C-39012
1.50 [38,1]
.75 [19,1]
.26 [6,6]
J7
J6
J5
J4
J3
J2 .59 [14,99] MATES WITH TYPE`N`MALE CONN PER MIL-C-39012 6 PLS
.50 [12,7] 1.000 [25,4] 5 PLS
ELECTRICAL SPECIFICATIONS
D333KS .860-.900 GHz 1.35:1 Maximum >27 dB J5-J6 (J1, J2, J3, J4 & J7 Open) 20 dB Minimum all other Insertion Loss: 12.0 ± .4 dB (J7-J1, J7-J2) Coupling: 10.0 ± .5 dB (J5-J1) Path Loss: 4.5 dB Maximum (4.1 dB Typical) (J7-J6) RF Power: 50mW Maximum each input Operating Temperature: 30° to +70°C. Port Designations above indicate (RF OUT -- RF IN) Model: Frequency: VSWR: Isolation:
PRESS IN SMA FEM CONN MATES WITN SMA MALE PER MIL-C-39012 (SEE NOTE 1) 6.00[152,4] .50 [12,7] 1.000[25,4] TYP .59[14,99] J6 J5 J4 J3 J2 J1
.38[9,65] (7 PLS) PRESS IN TYPE N FEM MATES WITH N MALE CONN PER MIL-C-39012 6 PLS. (SEE NOTE 2)
3.00 [76,2] 1.50 [38,1]
J7
KDI 64537 D333KS D/C
2.750 [69,9]
.190[4,83] THRU 4 PLS. .13[3,3] .27 [6,86] 5.750[146,1]
.13 [3,3]
.75 [19,1]
Notes:
1. Connector SMA: Passivated Stainless Steel ASTM-A-582 (QQ-S-764) Body with Gold Plated (MIL-G-45204 Type II, Class I, Grade C) 2. Connector N: Nickel Plated (QQ-N-290) over CU. Strike (MIL-C-14550) over Brass Body 1/2 HD Comp 22 (QQ-B-626) 3. HSG: Chem Film (MIL-C-5541) Class 1A over Aluminum 6061-T6 per (QQ-A-250)
KEY: Inches[Millimeters] .XX ±.03 .XXX ±.010 [.X ±0.8 .XX ±0.25]
An MCE Company
CORPORATION
TRIANGLE
60 South Jefferson Road, Whippany, NJ 07981 Tel: 973-887-8100 · Fax: 973-884-0445 E-Mail: kdisales@aol.com See us on the web @ www.kditriangle.com
10/98
|
|
