|
Details, datasheet, quote on part number:DB001-00
| |
Datasheet text preview:
Peripheral Integrated Circuits
Peripheral Integrated Circuits
Complimentary Products for NVE's GMR Sensors
In addition to GMR Sensor products, NVE has begun designing and manufacturing accessory products for our sensors. These products are designed to be used with NVE"s sensors, or in some cases as stand-alone parts, to provide higher level signal processing capabilities coupled with the robust performance characteristics that NVE products are known for. DB Series Power Switch ICs In many industrial control applications, a digital current outp ut of up to 200mA is required. NVE's DB Series parts are designed to meet these requireme nts. They feature transient protection to meet rigid EMC and ESD standards, ther mal shutdown for temperature protection, reverse battery protection , a regulated voltage output, an on-chip LED driver, and short circuit protection of the current drive outp ut transistor. The DB001-00 is designed specifically to work together with NVE's AD9 xx-00 short circuit protected GMR switch, to create a very small IC combination suitable for use in miniature sensor assemblies. The DB002-02 is designed to take a ge neric digital input from any source, including inductive and photo sensors, and provide the digital current output. DC Series Voltage Regulator ICs These ICs are designed for use in high voltage, low current applications. They provide a wide input voltage range, up to 60V, and are available in 3.3V and 5.0V outputs. They feature reverse battery protection and excellent immuni ty to transients and noise, allowing for the reduction or elimination of filtering devices at the PCB level. They are available in the TDFN6 package, which features a small PCB footprint (2.5mm X 2.5mm), and an exposed lead frame on the back, for heat sinki ng to the PCB. DC series voltage regulators meet 42V automotive standards. DD Series Signal Processing IC for Analog GT Sensors The DD001-12 is designed to be interfaced with an NVE ABL series GT Sensor, to provide a digital output signal with excellent stability characteristics. It can be located away from the sensor, so that the AB L package (MSOP8 or TDFN6) can be placed in a small remote housing, resulting in the absolute minimum size sensor package. The DD001-12 can also be used with other sensing devices which feature a sinusoidal output, to provide the same stable current mod ulated signal that it provides for NVE's ABL series GT Sensors.
NVE Corporation (800) 467-7141
11409 Valley View Road, Eden Prairie, Minnesota 55344 USA Web: www.nve.com Email: info@nve.com 11/15/02
DB Series Power Switch ICs
DB Series Power Switch ICs
Features:
Designed to Work Independently, or with AD9xx High Current Output Short Circuit, Reverse Battery, and Transient Protection LED Driver Excellent Temperature and Voltage Performance Small, Low Profile Surface Mount Package
Applications:
Output Driver for Sensor Assemblies Usable with Magnetic, Inductive, and Photo Sensors
Description:
The DB series signal processing ICs are designed to take a digital input from a sensor eleme nt, and provide a high current switched output corresponding with the sensor input. These parts function as the "front end" of a complete sensor assembly, and include protection against short circuits and high voltage transients from capacitive and inductive loads. The parts also feature thermal shutdown circuitry and reverse battery protection. The y provide a regulated output voltage for the sensor and other components in the assembly, and an LED driver to indicate an "ON" condition. Two different part numbers are offered, the DB001-00 and the DB002-02. The DB001-00 is designed to work with NVE's AD9xx short circuit protected GMR switch products. Together, these two ICs form the bulk of the signal processing required for pne uma tic cylinder position sensing electronics. Using these two ICs, the end user only requires a few capacitors and an LED in order to implement the complete sensor assembly circuit. In addition, both the AD9xx part and the DD001-00 part come in MSOP8 packages, so that the customer can implement the complete design on an extre mel y small PCB. The DB002-02 uses the larger SOIC8 package, and is designed to work with NVE's AD1 xx GMR Switch products, as well as any other current sourcing or CMOS/TTL digital output sensor element, such as an inductive sensor or a photo sensor. For size critical applications, both the DB001-00 and DB002-02 are available in die form.
NVE Corporation (800) 467-7141
11409 Valley View Road, Eden Prairie, Minnesota 55344 USA Web: www.nve.com Email: info@nve.com 11/15/02
DB Series Power Switch ICs
Part Numbers and Configurations:
Part Number DB001-00 DB002-02 Input Curre nt Sinking from AD9xx-00 Any Current Sourcing or CMOS/TTL Compatible Digital Output Device Die Size (mm) 1.48 X 2.25 1.48 X 3.00 P ackage MSOP8 SO IC8 Marking FFD Part Number
Schematic:
A block representation of the DB001-00 series parts is shown below:
Volt age Regulat or 3.3 Volts
VCC Sin k Out
Vreg In put Amplifier
Sou rce Out
Thermal Shut down
LED Grou nd ISC
A block representation of the DB002-02 series parts is shown below:
VCC Sink Out Amplifier Voltage Regulator 5 . 0 Volts Vreg Input
Source Out
Thermal Shutdown
LED Ground S h o r t Circuit Detection Circuitry Cap
NVE Corporation (800) 467-7141
11409 Valley View Road, Eden Prairie, Minnesota 55344 USA Web: www.nve.com Email: info@nve.com 11/15/02
DB Series Power Switch ICs
Packages:
Please see the package drawing section in the Appendix for dimensions of the MSOP8 and SOIC8 packages.
Pin Configuration:
VCC ISC Source Out Sink Out Vreg In LED Ground VCC LED Source Out Sink Out Vreg
DB002-02 NVE
FFD NVE
Cap In Ground
Application Circuits:
DB001-00 in Current Sourcing Output Configuration:
Ground Source Cap Cap2 Vreg Vreg VCC
VCC
AD9xx-xx
Cross Axis
FFD NVE
Sink ShortL VCC
In LED Ground
ISC Source Out Sink Out
Out
t 1 Cap
t 2 Cap Ground
Note : For current sinking applications, connect Source Out pin to Ground, and use Sink Out pin as the output.
DB002-02 in Current Sourcing Output Configuration:
N/C VCC Vreg VCC
VCC
AD124-00
N/C N/C Ground C r o s s Axis Source N/C N/C Cap In Ground
DB002-02 NVE
LED Source Out S i n k Out
Out
Delay Cap Ground
Note : For current sinking applications, connect Source Out pin to Ground, and use Sink Out pin as the output. NVE Corporation (800) 467-7141 11409 Valley View Road, Eden Prairie, Minnesota 55344 USA Web: www.nve.com Email: info@nve.com 11/15/02
DB Series Power Switch ICs
Electrical characteristics @-40°C to +125°C, unless otherwise noted Parameter Input Voltage (DC001-00) Vreg Voltage (DC001-00) Input Voltage (DC002-02) Vreg Voltage (DC002-02) Vreg Output Current Switched Output Current Bias Current (DC001-00) Bias Current (DC002-02) Bias Current Change when part is On (DC002-02) LED Drive Current Thermal Shutdown Temperature Sinking Input Current Required (DC001-00) Sourcing Input Current or CMOS/TTL Drive Current Required (DC002-02) Min 4.5 3.0 6.2 4.5 Typ 3.3 5.0 Max 30 3.6 30 5.5 10 200 Units Volts Volts Volts Milliamps Milliamps Milliamps Milliamps Microamps Milliamps °C Microamps Microamps
1.0 1.4 +700 3 175 100 5
Absolute maximum ratings * Parameter Limit Input Voltage 36V Reverse Battery Protection -36V Output Current 300mA Junction Temperature Range, TJ -40°C to +175°C Storage Temperature Range -65 °C to +200°C
*S tresses beyond those listed under "Absolute maximum ratings" may cause permanent dama ge to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Electrical characteristics" is not implied.
Notes : 1. This part has reverse battery protection to 36V 2. Due to package size, MSOP8 package contains 3-letter code to designate part type.
NVE Corporation (800) 467-7141
11409 Valley View Road, Eden Prairie, Minnesota 55344 USA Web: www.nve.com Email: info@nve.com 11/15/02
|
|
