|
Details, datasheet, quote on part number:OT12/230-240/10
| |
Datasheet text preview:
OT 12/230-240/10
Electronical stabilized LED-supply
Technical Information
Edition: Jan. 2001
subject to change
Technical data: Reference: for LED modules: Line voltage, nominal: Line current, nominal: Line frequency: Output voltage: OT 12/230-240/10 respect to the output conditions 230V / 240V 0,07 Arms 0/50/60 Hz DC voltage 10,5V ± 0,5V electronical stabilized, line ripple max. ± 0,2V 12 W max. 3,6 W (at 12 W output wattage) 0,4 W 12 W 240 Vrms + 6 % 0,9 EN 55015 EN 61000-3-2 EN 61547 -20 °C bis +50 °C 3 kVrms no yes autom. reversible, 30 min. autom. switch off reversible autom. switch off reversible screw terminals max. 4 m NYM 3 x 1,5 mm2/ H03VV - F2 x 0,75 NYM 3 x 1,5 mm2/ H03VV - F2 x 0,75 sheath 1,2 cm; conductors 0,6 cm 1,5 mm² bis 0,75 mm² 1,5 mm² bis 0,75 mm² 109 mm x 50 mm x 35 mm ;
Max. module wattage: Losses: Partial load: Max. allowed voltage: Power factor: Radio interference: Harmonic content: Immunity: Temperature range: Galvanic insulation between primary and secondary side: Dimming: Non-load proof: Short circuit protection: Overload protection: Overheating protection: Connections: 10 V-wiring: Primary: Secondary: Wire stripping: Wire cross section, primary: Wire cross section, secondary: Geometry (l x b x h): Approvals:
OT 12/230-240/10
Electronical stabilized LED-supply
Technical Information
Edition: Jan. 2001
subject to change
Allowed wiring diameters: Primary 9 mm 6 mm 3,6 mm x 6 mm Secondary 9 mm 6 mm 3,6 mm x 6 mm
|
|
