|
Details, datasheet, quote on part number:OT20/230-240/24
| |
Datasheet text preview:
OT 20/230-240/24
Engineering Sample Electronical stabilized LED-supply
primary Technical Information
Edition: Dec. 2000
subject to change
Technical data: Reference: for LED modules: Line voltage, nominal: Line current, nominal: Line frequency: Output voltage: OT 20/230-240/24 respect to the output conditions 230V / 240V 0,2 Arms 50/60 Hz DC voltage 24,0V ± 1,0V electronical stabilized, line ripple max. ± 0,2V 17 W (only engineering sample) max. 5,5 W (at 17 W output wattage) 1,2 W 17 W 240 Vrms + 6 % 0,5 (only engineering sample) EN 55015 EN 61000-3-2 EN 61547 -20 °C bis +45 °C 3 kVrms no yes autom. reversible, 30 min. autom. switch off reversible autom. switch off reversible screw terminals max. 4 m NYM 3 x 1,5 mm2/ H03VV - F2 x 0,75 NYM 3 x 1,5 mm2/ H03VV - F2 x 0,75 sheath 1,2 cm; conductors 0,6 cm 1,5 mm² bis 0,75 mm² 1,5 mm² bis 0,75 mm² 109 mm x 50 mm x 35 mm in preparation: is possible , VDE-EMV
Max. module wattage: Losses: Partial load: Max. allowed voltage: Power factor: Radio interference: Harmonic content: Immunity: Temperature range: Galvanic insulation between primary and secondary side: Dimming: Non-load proof: Short circuit protection: Overload protection: Overheating protection: Connections: 24 V-wiring: Primary: Secondary: Wire stripping: Wire cross section, primary: Wire cross section, secondary: Geometry (l x b x h): Approvals: Line voltage 230V / 240V DC:
OT 20/230-240/24
Engineering Sample Electronical stabilized LED-supply
primary Technical Information
Edition: Dec. 2000
subject to change
Allowed wiring diameters: Primary 9 mm 6 mm 3,6 mm x 6 mm Secondary 9 mm 6 mm 3,6 mm x 6 mm
|
|
