|Category||Timing Circuits => Resonators => SAW Resonators|
|Description||Frequency = 674.03 ;; Description = Resonator|
|Datasheet||Download RP1032 datasheet
Designed for 674 MHz CATV Local Oscillators Nominal Insertion Phase Shift 180° at Resonance Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case
The is a two-port, 180° surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency oscillators operating at or near 674 MHz. Typical applications include the second LO in CATV set-top convertors with channel 3 output.
CW RF Power Dissipation (See: Typical Test Circuit.) DC Voltage Between Any Two Pins (Observe ESD Precautions) Case Temperature
Characteristic Frequency (+25°C) Insertion Loss Quality Factor Temperature Stability Unloaded Q 50 Loaded Q Turnover Temperature Turnover Frequency Temp. Coefficient Frequency Aging RF Equivalent RLC Model
DC Insulation Resistance between Any Two Pins Motional Resistance Motional Inductance Motional Capacitance Shunt Capacitance Lid Symbolization (in addition to Lot and/or Date Codes)CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
Frequency aging is the change in fC with time and is specified +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years. The frequency fC is the frequency of minimum IL with the resonator in the specified test fixture a 50 test system with VSWR 1.2:1. Typically, fOSCILLATOR or fTRANSMITTER is less than the resonator fC. One or more of the following United States patents apply: 4,454,488; 4,616,197. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Unless noted otherwise, case temperature +25°C± 5°C The design, manufacturing process, and specifications of this device are subject to change without notice. Derived mathematically from one or more of the following directly measured parameters: fC, IL, 3 dB bandwidth, f C versus TC, and CO. Turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fO. The nominal frequency at any case temperature, T C, may be calculated from: [1 - FTC (TO - TC)2]. Typically, oscillator is 20° less than the specified resonator TO. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance CO is the measured static (nonmotional) capacitance between either pin 1 and ground or pin 2 and ground. The measurement includes case parasitic capacitance.by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
This two-port, three-terminal SAW resonator is bidirectional. However, impedances and circuit board parasitics may not be symmetrical, requiring slightly different oscillator component-matching values.The following equivalent LC model is valid near resonance:
Connection Input or Output or Input Case Ground
The curve shown on the right accounts for resonator contribution only and does not include LC component temperature contributions.
The plot shown below is a typical frequency response for the RP series of two-port resonators. The plot is for RP1094.
This SAW resonator can be used in oscillator or transmitter designs that require 180° phase shift at resonance in a two-port configuration. Oneport resonators can be simulated, as shown, by connecting pins 1 and 2 together. However, for most low-cost consumer products, this is only recommended for retrofit applications and not for new designs. Conventional Two-Port Design: Simulated One-Port Design:by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
|Some Part number from the same manufacture RF Monolithics|
|RP1053-2 Frequency = 310.0 ;; Description = Resonator|
|RP1094 Frequency = 915.0 ;; Description = Resonator|
|RP1102 Frequency = 905.5 ;; Description = Resonator|
|RP1104 Frequency = 824.25 ;; Description = Resonator|
|RP1105 Frequency = 640.0 ;; Description = Resonator|
|RP1207-7 Frequency = 434.02 ;; Description = Resonator|
|RP1236 Frequency = 312.0 ;; Description = Resonator|
|RP1237 Frequency = 418.0 ;; Description = Resonator|
|RP1238 Frequency = 407.3 ;; Description = Resonator|
|RP1239 Frequency = 315.0 ;; Description = Resonator|
|RP1285 Frequency = 916.55 ;; Description = Resonator|
|RP1286 Frequency = 906.0 ;; Description = Resonator|
|RP1298 Frequency = 423.22 ;; Description = Resonator|
|RP1308 Frequency = 433.92 ;; Description = Resonator|
|RP1312 Frequency = 854.0 ;; Description = Resonator|
|RS1033-1 Frequency = 668.03 ;; Description = Resonator|
|RS1033-5 Frequency = 668.1 ;; Description = Resonator|
|RS1035-5 Frequency = 680.1 ;; Description = Resonator|
|RX5000 Frequency = 433.92 ;; Description = Receiver, Ash, 115.2 KBPS|
|RX5001 Frequency = 315.0 ;; Description = Receiver, Ash, 115.2 KBPS|
RF1283 : SAW Resonators Frequency = 433.92 ;; Description = RF Filter
RO2053 : SAW Resonators Frequency = 310.0 ;; Description = Resonator
RO2073 : SAW Resonators Frequency = 315.0 ;; Description = Resonator
RO2165A : SAW Resonators Frequency = 858.25 ;; Description = Resonator
RO2165A-1 : SAW Resonators Frequency = 858.25 ;; Description = Resonator
RO2166A-2 : SAW Resonators Frequency = 857.65 ;; Description = Resonator
RX5001 : Frequency = 315.0 ;; Description = Receiver, Ash, 115.2 KBPS
SF1102B : SAW Resonators Frequency = 230.0 ;; Description = Filter, W-cdma if
SF1115A : SAW Resonators Frequency = 199.0 ;; Description = Filter, Gsm/pcs Receiver if
RO2166E-1 : 857.65 MHz SAW Resonator
RF3417E : Saw Filter Filter Bandpass 315MHz Center; NARROWBAND FILTER, SM3030-6 Specifications: Filter Type: Bandpass ; Packaging: Cut Tape (CT) ; Package / Case: 6-SMD, No Lead ; Applications: Wireless ; Frequency: 315MHz Center ; Insertion Loss: 1.8dB ; Bandwidth: 600kHz ; Mounting Type: Surface Mount ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
BQ48SH-28X6NSH : ti BQ48SH, Snaphat W/integrated Battery & Crystal. D Detachable Unit Allowing Replacement D Integrated 6-pF Watch Crystal for Real-Time Clock Operation Integrated Lithium Coin Cell for Nonvolatile Memory Backup Protects Battery and Crystal From Conditions Associated with Surface Mount Soldering For Use With bq4802YDSH and bq4802LYDSH Keyed Insertion to Avoid Incorrect Attachment The bq48SH28x6 is the top section.
BXO9308 : Frequency Range (MHz) = 350 - 400 ;; P1dB Comp Point (Typ/Min) (dBm) = 6 / 4 ;; Tuning Voltage (Min to Max) (V) = 0 to 5 ;; Phase Noise @ 100 KHZ (Typ) (dBc/Hz) = -120 ;; Harmonics (Typ/Max) (dBc) = -15 / -10 ;; DC Power (Typ) (V/mA) = 5 / 12 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Connectorized.
FMOC11 : Thru-hole Hcmos/ttl Compatible 5.0 VDC 5.0 VDC. 5.0 Vdc Supply Voltage HCMOS/TTL Compatible Wide Frequency Range Hermetically Sealed S Parameter Frequency Range Overall Frequency Tolerance Operating Temperature Range Storage Temperature Supply Voltage (Vdd) Supply Current (Icc) Symmetry (Duty Cycle) Output "O" Level (VOL) Output "1" Level (VOH) Rise and Fall Time Start Time Output Load Pin 1 Options.
FMOCJS : SMD Hcmos Compatible 5.0 VDC 5.0 VDC. HCMOS Compatible J-Lead Molded Plastic Surface Mount Tape and Reel Available S Parameter Frequency Range Overall Frequency Tolerance Operating Temperature Range Storage Temperature Supply Voltage (Vdd) Supply Current (Icc) Symmetry (Duty Cycle) Output "O" Level (VOL) Output "1" Level (VOH) Rise and Fall Time Start Time Output Load Pin 1 Options (See.
FMTCLS : SMD Hcmos/ttl or Siave 5.0 VDC 5.0 VDC. 5.0 Vdc Supply Voltage HCMOS/TTL Compatible Clipped Sinewave Tight Stability Over Temp. S Parameter Frequency Range Frequency Adjustment Range Frequency Stability vs. Temp Frequency Stability vs. Input V. Frequency Stability vs. Load Frequency Stability vs. Aging Storage Temperature Supply Voltage (Vdd) Supply Current (Icc) Symmetry (Duty Cycle) Output.
HO4006 : Frequency = 640.0 ;; = Voltage Controlled Saw Oscillator. SAW Frequency Stabilization Fundamental-Mode Oscillation at 640.0 MHz A Rugged, Compact General-Purpose Oscillator The frequency of this oscillator is stabilized by surface-acoustic-wave (SAW) technology. This results in excellent performance from a compact, rugged, oscillator operating at the fundamental frequency of 640.0 MHz. The highly-reliable.
ICS84329AM : 700MHz Low Jitter Lvpecl Synthesizer. Pin Compatible With SY89429VZC..
ICS9250-18 : CPU/Memory Specific PLL. Frequency Generator & Integrated Buffers For Celeron & Pii/iii(tm).
LMX2364 : Fractional-N PLLs. LMX2364 - 2.6 GHZ Fractional RF Frequency Synthesizer With 850 MHZ Integer-n if Frequency Synthesizer, Package: Evaluation Board, Pin Nb=-.
LMX2502 : PLL + VCOs. LMX2502 - Frequency Synthesizer System With Integrated Vcos, Package: Evaluation Board, Pin Nb=-.
MK2049 : General Purpose PLL. Communications Clock PLL. The is a Phase-Locked Loop (PLL) based clock synthesizer, which accepts an 8 kHz clock input as a reference and generates T3, E3, and OC3 frequencies. The device can also accept or E3 input clock and provide the same output for loop timing. All outputs are frequency locked together and to the input. This allows for the generation of locked clocks an 8 kHz backplane.
MPC972 : Clock Circuits. Low Voltage PLL Clock Driver. The MPC972/973 are 3.3V compatible, PLL based clock driver devices targeted for high performance CISC or RISC processor based systems. With output frequencies to 125MHz and skews of 550ps the MPC972/973 are ideally suited for most synchronous systems. The devices offer twelve low skew outputs plus a feedback and sync output for added flexibility and ease.
MSM6242B : Direct Bus Connected CMOS Real-time Clock/calendar. The is a silicon gate CMOS Real Time Clock/Calendar for use in direct busconnection Microprocessor/Microcomputer applications. An on-chip 32.768 kHz crystal oscillator time base is divided to provide addressable 4-bit I/O data for SECONDS, MINUTES, HOURS, DAY OF WEEK, DATE, MONTH and YEAR. Data access is controlled by 4-bit address, chip selects (CS0,.
PSA4000A : Frequency (MHz) = 3996-4004 ;; Step Size (KHz) = 3130 ;; Power (dBm) = -1.5 2.5 ;; RMS Phase Error (°) = 1.50 ;; Side Band Spurs (dBm) = -70 ;; VCC (Vdc) = 5 ;; Icc (mA) = 26 ;; Package = PLL.
RP1239 : SAW Resonators. Frequency = 315.0 ;; = Resonator. Designed for 315 MHz Transmitters Nominal Insertion Phase Shift 180° at Resonance Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case The is a two-port, 180° surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of low-power AM and FSK transmitters operating at 315.0.
VCO-106 : Hi-rel Vco. Model: VCO-106 Rev: A Date: 7/22/2002 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 400 MHz 800 MHz Tuning Sensitivity: 400 MHz 500 MHz 600 MHz 700 MHz 800 MHz Output Power Output Phase Noise: 10 kHz 100 kHz 1000 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic).
VTO-9032 : RF. Hyperabrupt Varactor Tuned Oscillator. 320 MHz to 2.3 GHz Coverage Fast Tuning Fast Setting Time +20 VDC Max Tuning Voltage 10 mW Output Power 2.0 dB Output Flatness Hermetic Thin-film Construction microstripline resonator. This provides extremely fast tuning speed limited primarily by the internal impedance of the usersupplied voltage driver. This family of oscillators is similar to the standard.
ICS1493-17 : Clock Synthesizer for Portable Systems The ICS1493-17 is a low-power, low-jitter clock synthesizer designed to replace multiple crystals and oscillators in portable audio/video systems. The device generates a 37 MHz processor clock, a 48 MHz USB clock, a fixed 22.5792 MHz audio clock, a selectable 24.576 MHz or 22.5792 MHz audio clock, and a 27MHz reference.