Details, datasheet, quote on part number: RP1237
CategoryTiming Circuits => Resonators => SAW Resonators
TitleSAW Resonators
DescriptionFrequency = 418.0 ;; Description = Resonator
CompanyRF Monolithics
DatasheetDownload RP1237 datasheet


Features, Applications

Designed for 418.00 MHz Transmitters Nominal Insertion Phase Shift 180 at Resonance Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case

The is a two-port, 180 surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 418.0 MHz. The RP1237 is designed specifically for remote-control and wireless security transmitters operating in the United Kingdom under DTI MPT 1340 and in the USA under FCC Part 15.231 regulations.

Characteristic Center Frequency (+25C) Insertion Loss Quality Factor Temperature Stability Unloaded Q 50 Loaded Q Turnover Temperature Turnover Frequency Temp. Coefficient Frequency Aging RF Equivalent RLC Model

DC Insulation Resistance between Any Two Pins Motional Resistance Motional Inductance Motional Capacitance Shunt Static Capacitance Lid Symbolization (in addition to Lot and/or Date Codes)

CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.

1. Frequency aging is the change in fC with time and is specified +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. 2. The frequency C is the frequency of minimum IL with the resonator in the specified test fixture a 50 test system with VSWR 1.2:1. Typically, fOSCILLATOR or fTRANSMITTER is less than the resonator fC. 3. One or more of the following United States patents apply: 4,616,197. 4. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. 5. Unless noted otherwise, case temperature 2C 6. The design, manufacturing process, and specifications of this device are subject to change without notice. 7. Derived mathematically from one or more of the following directly measured parameters: fC , IL, 3 dB bandwidth, fC versus TC, and CO. 8. Turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fO. The nominal frequency at any case temperature, TC , may be calculated from: [1 - FTC (TO - TC)2]. Typically, oscillator is 20 less than the specified resonator TO. 9. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance CO is the measured static (nonmotional) capacitance between either pin 1 and ground or pin 2 and ground. The measurement includes case parasitic capacitance.

by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.

CW RF Power Dissipation (See: Typical Test Circuit) DC Voltage Between Any Two Pins (Observe ESD Precautions) Case Temperature

This two-port, three-terminal SAW resonator is bidirectional. However, impedances and circuit board parasitics may not be symmetrical, requiring slightly different oscillator component-matching values.

The following equivalent LC model is valid near resonance:
Connection Input or Output or Input Case Ground

The curve shown on the right accounts for resonator contribution only and does not include LC component temperature contributions.

The plot shown below is a typical frequency response for the RP series of two-port resonators. The plot is for RP1094.

This SAW resonator can be used in oscillator or transmitter designs that require 180 phase shift at resonance in a two-port configuration. Oneport resonators can be simulated, as shown, by connecting pins 1 and 2 together. However, for most low-cost consumer products, this is only recommended for retrofit applications and not for new designs. Conventional Two-Port Design: Simulated One-Port Design:

by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.


Some Part number from the same manufacture RF Monolithics
RP1238 Frequency = 407.3 ;; Description = Resonator
RP1239 Frequency = 315.0 ;; Description = Resonator
RP1285 Frequency = 916.55 ;; Description = Resonator
RP1286 Frequency = 906.0 ;; Description = Resonator
RP1298 Frequency = 423.22 ;; Description = Resonator
RP1308 Frequency = 433.92 ;; Description = Resonator
RP1312 Frequency = 854.0 ;; Description = Resonator
RS1033-1 Frequency = 668.03 ;; Description = Resonator
RS1033-5 Frequency = 668.1 ;; Description = Resonator
RS1035-5 Frequency = 680.1 ;; Description = Resonator
RX5000 Frequency = 433.92 ;; Description = Receiver, Ash, 115.2 KBPS
RX5001 Frequency = 315.0 ;; Description = Receiver, Ash, 115.2 KBPS
RX5002 Frequency = 418.0 ;; Description = Receiver, Ash, 115.2 KBPS
RX5003 Frequency = 303.825 ;; Description = Receiver, Ash, 115.2 KBPS
RX5500 Frequency = 433.92 ;; Description = Receiver, Ash, 19.2 KBPS
RX5501 Frequency = 315.0 ;; Description = Receiver, Ash, 19.2 KBPS
RX6000 Frequency = 916.50 ;; Description = Receiver, Ash, 115.2 KBPS
RX6001 Frequency = 868.35 ;; Description = Receiver, Ash, 115.2 KBPS
RX6004 Frequency = 914.0 ;; Description = Receiver, Ash, 115.2 KBPS
RX6501 Frequency = 868.35 ;; Description = Receiver, Ash, 19.2 KBPS
SC3011B Frequency = 600.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3

OP4005B : Frequency = 622.08 ;; Description = Optical Timing Clock

RO2073A : SAW Resonators Frequency = 315.0 ;; Description = Resonator

RO2102 : SAW Resonators Frequency = 423.22 ;; Description = Resonator

RO2103 : SAW Resonators Frequency = 418.0 ;; Description = Resonator

RO2125A-5 : SAW Resonators Frequency = 304.3 ;; Description = Resonator

RP1298 : SAW Resonators Frequency = 423.22 ;; Description = Resonator

SC3031B : Frequency = 390.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3

SF1146B : SAW Resonators Frequency = 499.25 ;; Description = Filter

TRC101 : Highly Integrated Single chip

RO2156E-1 : Ideal for European 868.95 MHz Transmitters

HNIO-241R : 900mhz Relay I/O Wireless Modem

Same catergory

A477-A3 : Low Voltage Triple Line Leading Edge Control, CMOS Active. TRIPLE LINE LEADING EDGE CONTROL LOW VOLTAGE DELAY MODULES SMD S477-0020-A3 S477-0025-A3 Thru-Hole A477-0020-A3 A477-0025-A3 Time Delay ns Tolerance ns Rise Time 4 ns Vcc Vih Vil Iik Ioh Iol Voh Vol Vik Iih Iil Icch Iccl d Tc Ein Trin PW PP Iccl Vcc Pulse Voltage Rise Time Pulse Width Pulse Period Supply Current Supply Voltage 3.0 Volts 1.2 x Total.

BQ3285LFSS-A1 : ti BQ3285LF, Y2K Enhanced Acpi Compliant RTC ic W 240x8 Nvsram, Alarm Wake-up 3.3V op 32kHz Dedicated Output.

BTB2000BF-B : Crystal Oscillator SMD 20.000000mhz. Surface Mount Crystal Oscillators Seiko Epson Frequency range to 125.00MHz World's best selling SMD oscillator stocked in depth Output Enable/Disable now standard Excellent and price Output frequency range Power source voltage Temperature range Max. supply voltage Operating voltage Storage temp. Operating temp. Soldering condition Frequency stability.

HA-A870 : XO PECL Oscillators. Thru-hole Leaded 4 Pin (8 PIN) Frequency Range (Mhz) : 18.0 - 250.0 Output/input : Single, 3.3V.

ICS90C65 : Clock Circuits. Dual Voltage Video/memory Clock Generator. The Integrated Circuit Systems is a dual clock generator for VGA applications. It simultaneously generates two clocks. One clock is for the video memory, and the other is the video dot clock. The ICS90C65 has been specifically designed to serve the portable PC market with operation at either or 5V with a comprehensive power-saving shut-down mode. This.

LTC6900 : Precision Oscillators. LTC6900, Low Power, 1kHz to 20MHz Resistor Set SOT-23 Oscillator.

M6027 : TCXO/TCVCXO. Package = 3.2 X 5 MM Leadless ;; Frequency = 12.600 to 26.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 3.0 Volt.

M908 : SAW-Based clock modules. Vcso-based Gbe Clock Generator. The is a PLL (Phase Locked Loop) based clock generator that uses an internal VCSO (Voltage Controlled SAW Oscillator) to produce a very low jitter output clock. It is ideal for Gigabit Ethernet. An output clock frequency of 156.25MHz (with the M908-01-156.2500) is provided from eight LVPECL clock output pairs. The accuracy of the output frequency is assured.

MK3732-10 : Vcxoand Multiplier. The is a low cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive discrete VCXOs and multipliers. The patented on-chip Voltage Controlled Crystal Oscillator accepts 3.3 V input voltage to cause the output clocks to vary by 115 ppm. Using ICS' analog/digital Phase-Locked Loop (PLL) techniques, the device uses.

MTCO31 : TCXO/TCVCXO. Package = 14 Pin Dip Comp. ;; Frequency = 8.000 to 20.000 MHZ ;; Output Logic = Clipped Sine Wave ;; Supply Voltage = 5.0 Volt.

PLL350-942 : High Performance Signal Source. Model: PLL350-942 Rev: B Date: 4/17/2003 Customer: VARI-L COMPANY Operating Temperature Range: AppNote: 113, Opt. C) Parameter Frequency Range Step Size Settling Time - To within 1.0 kHz Output Power Output Phase Noise: 1 kHz 100 kHz 800 kHz Power Supply: VCO PLL IC Supply Current: VCO PLL IC Spurious Product - 200 kHz Reference Feedthrough Harmonic.

PLL620-80 : XO crystal oscillators. , Low Phase Noise xo (for 27-65MHz Fund.). Low Phase Noise XO (for 27-65MHz Fund. 3 rd O.T. Crystals) to 65MHz Fundamental 3 rd overtone Crystal. Output range: 65MHz (no PLL). Complementary outputs: CMOS, PECL or LVDS. Selectable OE Logic (enable high or enable low). Integrated variable capacitors. Supports 3.3V-Power Supply. Available in die form. Thickness 10 mil. XO IC specifically designed.

RF1210 : SAW Resonators. Frequency = 303.825 ;; = RF Filter. Ideal Front-End Filter for 303.825 MHz Wireless Receivers Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Rugged TO39 Hermetic Package The is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 303.825 MHz receivers. Receiver designs using this filter include.

SY02-HPLL : Synchronization Modules. SYNCHRONOUS EQUIPMENT LOW INPUT/ HIGH OUTPUT FREQUENCY CLOCK/SYNCHRONIZER - SY02-HPLL The is a high frequency crystal-based PLL synchronizer designed as a module level subsystem for easy incorporation into telecommunication equipment. Low jitter output from intrinsically low jitter VCXO or VCSO; Two references inputs from to 77.76MHz; (see table on pg. 3) One high.

V040ME01 : Package Style = MINI-14H ;; Frequency (MHz) = 38 to 41 ;; N@10KHz (dBc/Hz) = -108 ;; Tuning Voltage (Vdc) = 0.00 to 5.00 ;; Tuning Sensitivity (MHz/V) = 1.2 ;; Power (dBm) = 3.50 ± 3.50 ;; Op.temp ( C) = -30 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 18.

V590ME01 : Package Style = MINI-14S ;; Frequency (MHz) = 900 to 1200 ;; N@10KHz (dBc/Hz) = -102 ;; Tuning Voltage (Vdc) = 1.00 to 8.00 ;; Tuning Sensitivity (MHz/V) = 60 ;; Power (dBm) = 10.00 ± 2.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 25.

VCO190-2875T : High Performance Signal Source. Model: VCO190-2875T Rev: A Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: C) Parameter Frequency Range Tuning Voltage: 2750 MHz 2850 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency.

ADCLK954 : Two Selectable Inputs, 12 LVPECL Outputs, SiGe Clock Fanout Buffer The ADCLK954 is an ultrafast clock fanout buffer fabricated on the Analog Devices, Inc., proprietary XFCB3 silicon germanium (SiGe) bipolar process. This device is designed for high speed applications requiring low jitter. The device has two selectable differential inputs via the IN_SEL.

0-C     D-L     M-R     S-Z