|Category||RF & Microwaves|
|Description||Frequency = 868.35 ;; Description = Receiver, Ash, 115.2 KBPS|
|Datasheet||Download RX6001 datasheet
Designed for Short-Range Wireless Control and Data Communications Supports RF Data Transmission Rates to 115.2 kbps 3 V, Low Current Operation plus Sleep Mode Stable, Easy to Use, Low External Parts Count
The RX6001 hybrid receiver is ideal for short-range wireless control and data applications where robust operation, small size, low power consumption and low cost are required. The RX6001 employs RFM's amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of characteristics. All critical RF functions are contained in the hybrid, simplifying and speeding design-in. The RX6001 is sensitive and stable. A wide dynamic range log detector, in combination with digital AGC and a compound data slicer, provide robust performance in the presence of on-channel interference or noise. Two stages of SAW filtering provide excellent receiver outof-band rejection. The RX6001 generates virtually no RF emissions, facilitating compliance with ETSI 300 220 and similar regulations.
Absolute Maximum Ratings Rating Power Supply and All Input/Output Pins Non-Operating Case Temperature Soldering Temperature (10 seconds) Value +100 250 Units V
Electrical Characteristics (typical values given for 3.0 Vdc power supply, 25 oC) Characteristic Operating Frequency Modulation Type Data Rate Receiver Performance, High Sensitivity Mode Sensitivity, 2.4 kbps, 10-3 BER, AM Test Method Sensitivity, 2.4 kbps, 10-3 BER, Pulse Test Method Current, 2.4 kbps (RPR 330 K) Sensitivity, 19.2 kbps, 10-3 BER, AM Test Method Sensitivity, 19.2 kbps, 10-3 BER, Pulse Test Method Current, 19.2 kbps (RPR 330 K) Sensitivity, 115.2 kbps, 10-3 BER, AM Test Method Sensitivity, 115.2 kbps, 10-3 BER, Pulse Test Method Current, 115.2 kbps Receiver Performance, Low Current Mode Sensitivity, 2.4 kbps, 10-3 BER, AM Test Method Sensitivity, 2.4 kbps, 10-3 BER, Pulse Test Method Current, 2.4 kbps (RPR 1100 K) dBm mA dBm mA dBm mA dBm mA Sym fO Notes Minimum 868.15 OOK/ASK 115.2 kbps Typical Maximum 868.55 Units MHz
Electrical Characteristics (typical values given for 3.0 Vdc power supply, 25 oC) Characteristic Receiver Out-of-Band Rejection, ±5% fO Receiver Ultimate Rejection Sleep Mode Current Power Supply Voltage Range Power Supply Voltage Ripple Ambient Operating Temperature TA -40 Sym R±5% RULT IS VCC 2.2 Notes 3 Minimum Typical Maximum Units dB µA Vdc mVP-P
Notes: 1. Typical sensitivity data is based a 10-3 bit error rate (BER), using DC-balanced data. There are two test methods commonly used to measure OOK/ASK receiver sensitivity, the "100% AM" test method and the "Pulse" test method. Sensitivity data is given for both test methods. See Appendix 3.8 in the ASH Transceiver Designer's Guide for the details of each test method, and for sensitivity curves for 3.7 V supply voltage range at five operating temperatures. The application/test circuit and component values are shown on the next page and in the Designer's Guide. 2. At low data rates it is possible to adjust the ASH pulse generator to trade-off some receiver sensitivity for lower operating current. Sensitivity data and receiver current are given at 2.4 kbps for both high sensitivity operation (RPR 330 K) and low current operation (RPR = 1100 K). 3. Data is given with the ASH radio matched a 50 ohm load. Matching component values are given on the next page. 4. See Table 1 on Page 8 for additional information on ASH radio event timing.
Receiver Set-Up, 3.0 Vdc, +85 0C Item Nominal NRZ Data Rate Minimum Signal Pulse Maximum Signal Pulse AGCCAP Capacitor PKDET Capacitor BBOUT Capacitor BBOUT Resistor LPFAUX Capacitor LPFADJ Resistor RREF Resistor THLD2 Resistor THLD1 Resistor PRATE Resistor PWIDTH Resistor DC Bypass Capacitor RF Bypass Capacitor 1 Antenna Tuning Inductor Shunt Tuning/ESD Inductor Symbol DRNOM SPMIN SPMAX CAGC CPKD CBBO RBBO CLPF RLPF RREF RTH2 RTH1 RPR RPW CDCB CRFB1 LAT LESD OOK to GND OOK to GND ASK to Vcc Units kbps pF nH Notes see pages & 2 single bit 4 bits of same value ±10% ceramic ±10% ceramic ±10% ceramic for 6 dB below peak ±1%, typical values ±5% tantalum ±5% NPO 50 ohm antenna 50 ohm antennaCAUTION: Electrostatic Sensitive Device. Observe precautions when handling.
|Some Part number from the same manufacture RF Monolithics|
|RX6004 Frequency = 914.0 ;; Description = Receiver, Ash, 115.2 KBPS|
|RX6501 Frequency = 868.35 ;; Description = Receiver, Ash, 19.2 KBPS|
|SC3011B Frequency = 600.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3015B Frequency = 550.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3017B Frequency = 400.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3018B Frequency = 250.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3019B Frequency = 500.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3027B Frequency = 380.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3028B Frequency = 266.667 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3029B Frequency = 360.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3031B Frequency = 390.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3035B-1 Frequency = 800.0 ;; Description = Clock, Diff Sine Wave, Tol = 250ppm, VCC=3.3|
|SC3037B Frequency = 350.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3038B Frequency = 532.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3039B Frequency = 286.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3040B Frequency = 400.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3041B Frequency = 300.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SC3048B Frequency = 444.0 ;; Description = Clock, Diff Sine Wave, Tol = 200ppm, VCC=3.3|
|SF1054A-1 Frequency = 254.5 ;; Description = Filter, Wlan if|
|SF1056A Frequency = 110.592 ;; Description = Filter, Dect if|
|SF1059A Frequency = 350.0 ;; Description = Filter, Wlan if|
DR3001 : Frequency = 868.35 ;; Description = Transceiver Module
DR4001 : Frequency = 868.35 ;; Description = Transmitter Module
RF1172 : SAW Resonators Frequency = 433.92 ;; Description = RF Filter
RF1302 : SAW Resonators Frequency = 439.25 ;; Description = RF Filter
RO2081A : SAW Resonators Frequency = 325.05 ;; Description = Resonator
SF1115A : SAW Resonators Frequency = 199.0 ;; Description = Filter, Gsm/pcs Receiver if
RO2156D-2 : 868.95 MHz SAW Resonator
RO2166D-1 : 857.65 MHz SAW Resonator
TXC101 : Multi-channel High data rate Programmable
RO2073E : 315.0 MHz SAW Resonator
RO2102A-1 : 423.22 MHz SAW Resonator
1X605 : = Xinger Directional Couplers ;; Size LXWXH = 0.56 X 0.2 X 0.081" ;; Packaging = Surface Mount ;; Frequency MHZ = 2300-2700 ;; Power Handling Watts = 45.
2SC5095 : Bipolar Transistors. Vceo (V) = 10 ;; Ic (mA) = 15 ;; PC (mW) = 100 ;; Cob (pF) = 0.5 ;; Cre (pF) = 0.4 ;; .fT(Typ.) (GHz) = 10 ;; Package = Usm ;; Application = VHF to UHF Amp.
DA0735 : 20-300MHz Pin Diode Linear Vca.
LX723 : Power. General Silicon VDMOS and LDMOS transistors designed specifically for broadband RF applications. Suitable for Military Radios, Cellular and Paging Amplifier Base Stations, Broadcast FM/AM, MRI, Laser Driver and others. "Polyfet" TM process low feedback and output capacitances, resulting in high Ft transistors with high input impedance and high efficiency.
MA4EX950H-1225 : 700-1200 MHZ Hmic Double Balanced Mixer in SOT-25. Low Cost Miniature Plastic Package 7.0 dB Typical Conversion Loss to +17 dBm LO Drive HMICTM IC Process Silicon High Barrier Schottky Diodes - 1050 MHz IF Bandwidth M/A-COM's is a silicon monolithic 700-1200 MHz double balanced mixer in a low cost miniature surface mount SOT-25 package. The die uses M/A-COM's unique HMICTM silicon/glass process to achieve.
MHW8242A : MHW8242A 860 Mhz, 25 DB Gain, 128-Channel Catv Amplifier Module. Specified for 77 and 128Channel Loading Excellent Distortion Performance Silicon Bipolar Transistor Technology Unconditionally Stable Under All Load Conditions Applications CATV Systems Operating in the to 860 MHz Frequency Range Input Stage Amplifier in Optical Nodes, Line Extenders and Trunk Distribution Amplifiers for CATV Systems Driver Amplifier.
ML2751 : Power Amplifier And Lna. The a 900 MHz ISM band radio front-end intended for use in half duplex radio applications such as cordless phones and FCC Part 15 compliant devices. It integrates a power amplifier (PA), a Low Noise Amplifier (LNA), Pin Diode drivers for an external transmit/receive switch, and control circuits. The 100mW power amplifier has output power control with.
MY88 : Triple-Balanced Mixer. TRIPLE-BALANCED MIXER TO 18 GHz TO 18 GHz TO 8 GHz LO DRIVE: +13 dBm (NOMINAL) WIDE BANDWIDTH SSB Conversion Loss & SSB Noise Figure (max.) to 10 GHz, to 18 GHz, to 8 GHz to 18 GHz, to 18 GHz, to 8 GHz to 18 GHz, to 10 GHz, to 8 GHz fI = Isolation (min.) to 18 GHz to 18 GHz 1 dB Conversion Compression @ +13 dBm fL @ Input = 6 GHz @ -3 dBm = 6.01 GHz @ -3 dBm = 10 GHz @ 13 dBm = 15 GHz @ -3 dBm = 18 GHz @ 13 dBm = 15.01.
PE3502 : Product = Divide-by-4 ;; Input Operating Freq. Range (MHz) = 1500 - 3500 ;; Divide Ratio = 4 ;; Total Icc MA@3V = 12 ;; VCC Range (V) = 2.85 - 3.15 ;; Package Types = 8L Msop.
SD1542 : Avionics Transistors. Avionics Applications RF & Microwave Transistors.
SD1565 : UHF Radar Transistors. UHF Pulsed Applications RF & Microwave Transistors.
TRF1221 : Dual VCO/PLL Synthesizer With Up-Converter The TRF1121 and TRF1221 are VHF-UHF upconverters with integrated UHF and S-Band frequency synthesizers for radio applications in the 2 GHz to 4 GHz range. The IC performs the first up-conversion and generates the local oscillator (LO) for the second up-conversion. The device uniquely integrates an image reject.
MRF18060AL : 1805–1880 MHz, 60 W, 26 V Lateral N–Channel RF Power MOSFETs SUBSCRIBE The MRF18060ALR3 and MRF18060ALSR3 are designed for PCN and PCS base station applications with frequencies from 1800 to 2000 MHz. Suitable for FM, TDMA, CDMA and multicarrier amplifier applications. To be used in Class AB for PCN–PCS/cellular radio and WLL applications. Specified.
PX5420 : The Zarlink PX5420 optical receiver is a single channel TIA/LA optical receiver designed for various applications to 4.25 Gbps. It consists of a transimpedance amplifier (TIA) and an AC-coupled differential limiting amplifier (LA). The transimpedance amplifier achieves a nominal bandwidth of 3 GHz over a wide range of photodiode input capacitance. A photodiode.
MRF8S19140HR3 : RF Power Field Effect Transistors N--Channel Enhancement--Mode Lateral MOSFETs RF Power Field Effect Transistors N--Channel Enhancement--Mode Lateral MOSFETs.
VBF-2435+ : Coaxial Bandpass Filters Coaxial Bandpass Filters. Low Insertion Loss (2.0 dB typical) Good close-in rejection Versatile small size, coaxial, 1.43" length The VBF-2435+ Band Pass Filter is constructed using internal LTCC Band Pass Filter structure to achieve repeatable performance. Covering 2435 MHz ± 95 MHz, these units offer low insertion loss and good rejection at the band reject edges. Built using.