Voltage Range to 68 Volts 1.5 Watts Peak Power
Features
For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Typical IR less than 0.5 A above 11V High temperature soldering guaranteed: / 10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-0
Case: Molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color Band denotes positive end (cathode) Standard packaging: 12mm tape (EIA-481)
a Weight: 0.002 ounces, 0.064 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics
Rating at 25+ambient temperature unless otherwise specified. Type Number DC Power Dissipation at TL=75OC, measure at Zero Lead Length (Note 1) Derate above 75 OC
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 1, 2) Operating and Storage Temperature Range
TJ, TSTG + 150 Notes: 1. Mounted 5.0mm (0.013mm thick) land areas. 2. Measured on 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum.
Nominal Device Zener Voltage Test Zener Impedance Marking Vz @ Izt Current ZZK @ IZK Code Voltage IZT ZZT @ IZT (Notes 2) mA Ohms mA
Maximum DC Zener Leakage Current @ VR IZM uA Volts mA (dc)
Notes: 1: Tolerance and Voltage Regulation Designation - the type number listed indicates a tolerance 2: VZ limits are to be guaranteed at thermal equilibrium.
|