|Category||Optoelectronics => Display|
|Description||7.6 MM ( 0.3 Inch ) Micro Bright Seven Segment Displays|
|Company||Hewlett-Packard (acquired by Agilent Technologies, Inc.)|
|Datasheet||Download HDSP-A401-00000 datasheet
|mm (0.3 inch) Micro Bright Seven Segment Displays Technical Data
Available with Colon for Clock Display Compact Package x 0.500 inches Leads mm (0.1 inch) Centers Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green, Orange Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Surface Color Gives Optimum Contrast ± 50° Viewing Angle Design Flexibility Common Anode or Common Cathode
Right Hand Decimal Point ± 1. Overflow Character Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display High Light Output High Peak Current Excellent for Long Digit String Multiplexing Intensity and Color Selection Available See Intensity and Color Selected Displays Data Sheet Sunlight Viewable AlGaAsDescription
The mm (0.3 inch) LED seven segment displays are designed for viewing distances to 3 metres (10 feet). These devices use an industry standard size package and pinout. Both the numeric and
Orange Green HDSP7801 Description Common Anode Right Hand Decimal Common Anode Right Hand Decimal, Colon Common Cathode Right Hand Decimal Common Cathode Right Hand Decimal, Colon Common Anode ± 1. Overflow Common Cathode ± 1. Overflow Package Drawing
Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSPA80X Yellow, and HDSP-A90X Green data sheet for low current operation.
± 1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode.
These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal forportable applications. For additional information see the Low Current Seven Segment Displays.
-X X X-X HDSP-X X X-X Mechanical 00: No Mechanical Option Color Bin 0: No Color Bin Limitation 3: Color Bins 3- and 3+ only (applicable for Yellow devices only) Z: Color Bins 2- and 3+ only (applicable for Yellow devices only) Maximum Intensity 0: No Maximum Intensity Bin Limitation Minimum Intensity 0: No Minimum Intensity Bin Limitation Device Configuration/Color  1: Common Anode 2: Common Anode 3: Common Cathode 4: Common Cathode Device Specific Configuration Refer to Respective Datasheet mm (0.3 inch) Single Digit Seven Segment Display
Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
NOTES: 1. ALL DIMENSIONS IN MILLIMETRES (INCHES). 2. MAXIMUM. 3. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 4. REDUNDANT ANODES. 5. REDUNDANT CATHODES. 6. FOR HDSP-7400/-7800 SERIES PRODUCT ONLY.
|Some Part number from the same manufacture Hewlett-Packard (acquired by Agilent Technologies, Inc.)|
|HDSP-A401-00300 7.6 MM ( 0.3 Inch ) Micro Bright Seven Segment Displays|
|HDSP-H15X 14.2 MM ( 0.56 Inch ) Seven Segment Displays|
|HDSP-N15X 20 MM ( 0.8 Inch ) Seven Segment Displays|
|HEDS-1200 Optical Reflective Sensors|
|HFBR-0507 125 Megabaud Versatile Link The Versatile Fiber Optic Connection|
|HFBR-4663 Single Chip 10base-fl Transceiver|
|HFBR-5001 Low Cost, Industry Standard Fddi Mic Transceivers|
|HFBR-5104 Fddi, 100 MBPS Atm, And Fast Ethernet Transceivers in Low Cost 1x9 Package Style|
|HFBR-5106 100vg-anylan Multimode Fiber Transceivers in Low Cost 1x9 Package Style|
|HFBR-5198 Low Cost, Industry Standard Fddi Mic Transceivers|
ATF-13736 : 2-16 GHZ Low Noise Gallium Arsenide Fet
HFBR1424K : Low Cost, Miniature Fiber Optic Components With St, Sma, SC And FC Ports
HFBR1452K : Low Cost, Miniature Fiber Optic Components With St, Sma, SC And FC Ports
HFBR2454TB : Low Cost, Miniature Fiber Optic Components With St, Sma, SC And FC Ports
HLMP-3450 : T-13/4 ( 5 MM ) Low Profile Led Lamps
HLMP-GJ08 : T-13/4 ( 5 MM ) Precision Optical Performance Alingap Led Lamps
HPMX-3003-TR1 : 1.5 - 2.5 GHZ Lna Switch pa
LST2527-S4-T-FP : Coaxial Pigtailed Laser Module
PDT1446-DI-BI : Pigtailed Pin Photodiodes
XMT5160B-155-FP : 622 Mb/s Logic Interface Laser Transmitter
XMT5370-622 : 622 Mb/s Logic Interface Laser Transmitter
APCC02-41MBWA : Material: Gan , Wavelength: 466nm. The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. !I.C. COMPATIBLE !MECHANICALLY RUGGED. !GRAY FACE,WHITE SEGMENT. !PACKAGE.
APPDA04-41SGWA : Material: Gap , Wavelength: 568nm. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. !HIGH CONTRAST AND LIGHT OUTPUT. ! EASY MOUNTING ON P.C. BOARDS OR SOCKETS. !CATEGORIZED FOR LUMINOUS INTENSITY. !MECHANICALLY RUGGED. !GRAY FACE, WHITE SEGMENT. ! PACKAGE :500PCS / REEL. Notes: 1. All dimensions are in millimeters (inches), Tolerance.
CXA3562AR : LCD Drivers. LCD Driver. The is a driver IC developed for use with Sony polycrystalline silicon TFT LCD panels. It supports digital 2-parallel and single input, and the input data is analog demultiplexed into 12 phases and output. The CXA3562AR can directly drive an LCD panel, and the VCOM setting circuit and precharge pulse waveform generator are also on-chip. Supports 10-bit.
DA56-11YWA : Material: GAASp/gap , Wavelength: 588nm. DIGIT HEIGHT. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specificaions are subject to change without notice. N o. Dic D es Min. DA56-11YWA YELLOW (GaAsP/GaP) WHITE DIFFUSED.
JANS4N49 : Jan, Jantx, Jantxv, Single Channel Optocouplers. JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS : High Reliability Base lead provided for conventional transistor biasing Rugged package High gain, high voltage transistor +1kV electrical isolation Applications: Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high.
LN240CP : Point-Lighting LEDs. Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.4 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =.
SLD304XT : 1000mW High Power Laser Diode. The SLD304XT allows independent thermal and electric design. This laser diode has a built-in TE (Thermo Electric) cooler. High power Recommended optical power output = 900mW Low operating current Flat Package with built-in photodiode, TE cooler and thermistor Applications Solid state laser excitation Medical use Structure AlGaAs double-hetero-type laser.
SSL-LX3T453USBD : 4.5x3mm Triangular Top.
TIL3010 : ti TIL3010, Optocoupler/optoisolator. 250-V Phototriac Driver Output Gallium-Arsenide-Diode Infrared Source and Optically-Coupled Silicon Triac Driver (Bilateral Switch) UL Recognized. File Number E65085 High Isolation. 3535 V peak Output Driver Designed for 115 Vac Standard 6-Pin Plastic DIP typical 115 Vac(rms) applications D Solenoid/Valve Controls D Lamp Ballasts D Interfacing Microprocessors.
W934RZ/3GD : Material: Gap , Wavelength: 568nm. DESIGN. COLOR COMBINATION AVAILABLE. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change without notice. Note: 1/2 is the angle.
XNM1LUY53D23.5 : Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 18.
PS2561L1-1-L-A : Transistor Output Optocouplers Hi-Iso Photo 1-Ch. s: Manufacturer: CEL ; Product Category: Transistor Output Optocouplers ; RoHS: Details ; Configuration: 1 Channel ; Maximum Collector Emitter Voltage: 80 V ; Maximum Collector Emitter Saturation Voltage: 0.3 V ; Isolation Voltage: 5000 Vrms ; Current Transfer Ratio: 200 % to 400 % ; Maximum Forward.
SLC-22DU3F : Standard LED - Through Hole 2.0mm CYLINDER ORG DIFF. » » » LEDs - High Brightness - Leaded - Amber/Orange LEDs - High Brightness - Leaded - Amber/OrangeStandard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: ROHM Semiconductor ; Product Category: Standard LED - Through.
SML-D12Y8WT86 : Standard LED - SMD SMD Yellow 25-160 mcd. » » » LEDs - High Brightness - SMD - Yellow LEDs - High Brightness - SMD - YellowStandard SMD (surface mount device) LED components are often used in indication applications and generally have power levels s: Manufacturer: ROHM Semiconductor ; Product Category: Standard LED - SMD ; RoHS: Details.
TLP180(TPR,F,T) : Transistor Output Optocouplers AC input 80V 3750Vrms. s: Manufacturer: Toshiba ; Product Category: Transistor Output Optocouplers ; RoHS: Details ; Input Type: AC ; Maximum Collector Emitter Voltage: 80 V ; Maximum Collector Emitter Saturation Voltage: 0.4 V ; Isolation Voltage: 3750 Vrms ; Current Transfer Ratio: 600 % ; Maximum Forward Diode.
LTS-4301B : 7-Segment Blue 10-DIP (0.300", 7.62mm) 1 digit 0.40" (10.16mm) Display Modules - LED Character and Numeric; LED 7-SEG .40" 1DIGIT BLUE CC. s: Display Type: 7-Segment ; Color: Blue ; Package / Case: 10-DIP (0.300", 7.62mm) ; Number of Digits/Alpha: 1 ; Size / Dimension: 0.39" L x 0.50" W x 0.28" H (10mm x 13mm x 7mm) ; Common Pin: Common Cathode ; Digit/Alpha.
SSP-LXS1822UP16A : Display Modules - LED Dot Matrix and Cluster Green 3.5V; LED T-8MM 46MM SQ 16LED ULT PGRN. s: Color: Green ; Size / Dimension: 1.82" L x 1.82" W x 0.25" H (46.33mm x 46.33mm x 6.34mm) ; Millicandela Rating: 5000mcd ; Configuration: 16 Round ; Voltage - Forward (Vf) Typ: 3.5V ; Internal Connection: Common Cathode.
CA11426_STRADA-T-DW-RE-TAPE : Optics - LEDs, Lamps - Lenses Clear; LENS FOR LUXEON REBEL. s: Color: Clear ; For Use With/Related Products: Luxeon Rebel ; Lens Style/Size: Hourglass with Angled Top ; Viewing Angle: 152° ; Mounting Type: Adhesive, Screw ; Type: Lens ; Optical Pattern: Wide, Side Emitting ; Number of LEDs: 1 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
PLB3535AAR000 : High Power LEDs - Single Color Blue 30.6 lm 455nm to 470nm. Plessey ALPS Series High Power LEDs are a full-color range of high power, high efficacy LED's in lensed 3535 packages. The domed lens and low thermal resistance packaging ensure high optical output, cool running and optimum reliability. Three different lens options are available for each color.