|
|
Part: HLMA-DL00
Category:
Optoelectronics
-> Display
-> LEDs
-> LED Lamps
Description: T-13/4 ( 5 MM ) , T-1 ( 3 MM ) , High Performance Alingap Led Lamps
Company: Hewlett-Packard (acquired by Agilent Technologies, Inc.)
Datasheet: Download HLMA-DL00 datasheet File size : 328 kB
Request For quote: Find where to buy HLMA-DL00
Datasheet text preview:
H
T-13/4 (5 mm), T-1 (3 mm), High Performance AlInGaP LED Lamps Technical Data
SunPower Series HLMA-CX00 Series HLMA-DX00 Series HLMA-KX00 Series HLMT-CX00 Series HLMT-DX00 Series
Features
· Outstanding LED Material Efficiency · High Light Output over a Wide Range of Currents · Low Electrical Power Dissipation · CMOS/MOS Compatible · Colors: 590/592 nm Amber, 615/617 nm and 622 nm Reddish-Orange · Variety of Packages Available
Description
These untinted, non-diffused, solid state lamps utilize the latest absorbing/transparent substrate aluminum indium gallium phosphide (AS/TS AlInGaP) LED technology. These materials have a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. In addition, these LED lamps are at wavelengths ranging from amber to reddish orange and at viewing angles ranging from 7 to 45 degrees.
Applications
· Outdoor Message Boards · Safety Lighting Equipment · Signaling Applications · Emitter for Emitter/ Detector Applications · Changeable Message Signs · Portable Equipment · Medical Equipment · Automotive Lighting · Alternative to Incandescent Lamps
5963-2323E
1-37
Package Dimensions
5.08 (0.200) 4.57 (0.180) 9.19 (0.362) 8.43 (0.332) 12.70 (0.500) 11.94 (0.470) 0.89 (0.035) 0.64 (0.025)
5.08 (0.200) 4.57 (0.180)
3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 4.70 (0.185) 4.19 (0.165)
9.19 (0.362) 8.43 (0.332) 0.89 (0.035) 0.64 (0.025)
6.35 (0.250) 5.58 (0.220)
1.02 (0.040) NOM. 0.45 SQUARE NOMINAL (0.018) 25.40 MIN. (1.00)
CATHODE LEAD (23.0 MIN. 0.90)
1.65 (0.065) 1.35 (0.053)
CATHODE N LEAD OTE 1 ( 5.40 2 MIN. 1.00)
0.102 (0.004) MAX. TYP.
1.27 NOM. (0.050) 2.54 NOM. (0.100)
( 1.27 NOM. 0.050) ( 0.64 SQUARE N 0.025) OMIMAL
( 1.27 NOM. 0.050) ( 0.46 SQUARE N 0.018) OMIMAL
CATHODE
6.10 (0.240) 5.59 (0.220)
6.10 (0.240) 5.59 (0.220)
( 2.54 NOM. 0.100)
( 2.54 NOM. 0.100) NOTES
A
NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. THE LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040") DOWN THE LEADS, UNLESS OTHERWISE NOTED.
B
C
1-38
(T-13/4 Package) DC Forward Current[1,4,5] .. 50 mA Peak Forward Current[2] .. 200 mA Time Average Input Power[2] ......... 103 mW Transient Forward Current[3] (10 µs Pulse) ...... 500 mA Reverse Voltage (IR = 100 µA) ......... 5 V Operating Temperature Range ......... - 40 to 100°C Storage Temperature ......... - 40 to 120°C Junction Temperature ........ 130°C Soldering Temperature ......... 260°C for 5 seconds [1.59 mm (0.06 in.) below seating plane]
Notes: 1. Derate linearly as shown in Figure 4. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Time Average Power as specified in Figure 5. 3. The transient peak current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bonds. 4. Drive Currents between 10 and 30 mA are recommended for best long term performance. 5. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
Absolute Maximum Ratings at TA = 25°C
DC Forward Current[1,4,5] .. 50 mA Peak Forward Current[2] .. 200 mA Time Average Input Power[2] ......... 103 mW Transient Forward Current[3] (10 µs Pulse) ...... 500 mA Reverse Voltage (IR = 100 µA) ......... 5 V Operating Temperature Range ......... - 40 to 100°C Storage Temperature ......... - 40 to 100°C Junction Temperature ......... 110°C Solder Temperature ...... 260°C for 5 seconds [1.59 mm (0.06 in.) below seating plane]
Notes: 1. Derate linearly as shown in Figure 4. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Time Average Power as specified in Figure 5. 3. The transient peak current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bonds. 4. Drive Currents between 10 mA and 30 mA are recommended for best long term performance. 5. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
Absolute Maximum Ratings at TA = 25°C (T-1 Package)
1-39
Others parts begin by hl
HL-1 HL-2 HL-3 HL-4 HL-5 HL-6 HL-7 HL-8 HL-9 HL-10 HL-11 HL-12 HL-13 HL-14 HL-15 HL-16
|
|
|
