|
|
Part: HLMA-KH05
Category:
Optoelectronics
-> Display
-> LEDs
-> LED Lamps
Description: T-13/4 ( 5 MM ) , T-1 ( 3 MM ) , High Performance, Tinted, Diffused, Alingap, And TS Algaas Red Led Lamps
Company: Hewlett-Packard (acquired by Agilent Technologies, Inc.)
Datasheet: Download HLMA-KH05 datasheet File size : 328 kB
Request For quote: Find where to buy HLMA-KH05
Datasheet text preview:
H
T-13/4 (5 mm), T-1 (3 mm), High Performance, Tinted, Diffused, AlInGaP, and TS AlGaAs Red LED Lamps Technical Data
Features
· High Light Output Over a Wide Range of Currents · Popular T-1 and T-1 3/4 Packages · Choice of Three Colors Amber Reddish-Orange Deep Red · Wide Viewing Angles · Long Life: Solid State Technology · Available on Tape and Reel
HLMA-DX05 Series HLMA-KX05 Series HLMP-D1XX Series HLMP-J100/J150 Series
Applications
· Outdoor Message Boards · Automotive Lighting · Portable Equipment · Medical Equipment · Changeable Message Signs
Description
The HLMA-D/KXXX series tinted, diffused, solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technology. This technology has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. These LED lamps are available with a choice of two colors, 592 nm amber and 615 nm reddishorange, and with two viewing angles, 65° and 60°. The HLMP-D/JXXX series tinted, diffused solid state lamps utilize the highly optimized transparent substrate aluminum gallium arsenide (TS AlGaAs) LED technology. This technology has a very high luminous efficiency,
Device Selection Guide
Viewing Angle 21/2 65° 60° 40° 25° 55° 55° Amber d = 592 nm HLMADL05 HLMAKL05 ReddishOrange d = 615 nm HLMADH05 HLMAKH05 HLMPD115 HLMPD120 HLMPJ100 HLMPJ150 Deep Red d = 644 nm Package Outline A B A A C C
Package Description T-13/4 (5 mm), Tinted, Diffused, Standard Current T-1 (3 mm), Tinted, Diffused, Standard Current T-13/4 (5 mm), Tinted, Diffused, Standard Current T-13/4 (5 mm), Tinted, Diffused, Standard Current T-1 (3 mm), Tinted, Diffused, Standard Current T-1 (3 mm), Tinted, Diffused, Diffused, Low Current
5964-9287E
1-49
capable of producing high light output over the wide range of drive currents from 500 µA to 50 mA. The color is deep red at a
dominant wavelength of 644 nm. TS AlGaAs is a flip-chip LED technology, die attached to the anode lead and wire bonded to
the cathode lead. Available viewing angles are 25°, 40°, and 55°.
Package Dimensions
5.08 (0.200) 4.57 (0.180)
3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115)
3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 4.70 (0.185) 4.19 (0.165)
9.19 (0.362) 8.43 (0.332) 0.89 (0.035) 0.64 (0.025)
6.35 (0.250) 5.58 (0.220) 4.70 (0.185) 4.19 (0.165)
6.35 (0.250) 5.58 (0.220)
1.02 NOM. (0.040)
1.02 (0.040) NOM. 0.45 (0.018) SQUARE NOMINAL
CATHODE
0.45 SQUARE NOMINAL (0.018) 24.13 MIN. (0.95)
25.40 MIN. (1.00)
24.13 MIN. (0.95)
CATHODE
ANODE
ANODE
CATHODE
1.27( 0.050) NOM.
1.27 NOM. (0.050)
0.45 (0.018) SQUARE NOMIMAL 6.10 (0.240) 5.59 (0.220) CATHODE 2.54 (0.100) NOM. NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
2.54 NOM. (0.100)
2.54 NOM. (0.100)
1.27 NOM. (0.050)
A
B
C
HLMA-DL05/DH05/Kl05/KH05 AlInGaP Lamps Absolute Maximum Ratings at TA = 25°C
Parameter DC Forward Current[1,3,4] Peak Forward Current[2] Average Input Power[2] Reverse Voltage (IR = 100 µA) Operating Temperature Range Storage Temperature Range Junction Temperature Soldering Temperature [1.59 mm (0.06 in.) below seating plane] HLMADL05 50 200 103 5 -40 to +100 -55 to +100 HLMADH05 50 200 103 5 -40 to +100 -55 to +100 110 260°C for 5 second HLMAKL05 50 200 103 5 -40 to +100 -55 to +100 HLMAKH05 50 200 103 5 -40 to +100 -55 to +100 Units mA mA mW V °C °C °C
Notes: 1. Derate linearly as shown in Figure 4. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 5. 3. Drive currents between 10 mA and 30 mA are recommended for best long term performance. 4. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
1-50
Optical Characteristics at T = 25°C A
Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 35 35 35 35 100 100 100 100 Peak Wavelength peak (nm) Typ. 594 621 594 621 Color, Dominant Wavelength d[2] (nm) Typ. 592 615 592 615 Viewing Angle 2 1/2 Degrees[3] Typ. 65 65 60 60 Luminous Efficacy v (lm/w) 480 263 480 263
Part Number HLMADL05 DH05 KL05 KH05
Notes: 1. v is the total luminous flux output as measured with an integrating sphere. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at T = 25°C A
Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.9 1.9 1.9 1.9 2.4 2.4 2.4 2.4 Reverse Breakdown VR (Volts) @ IR = 100 µA Min. Typ. 5 5 5 5 25 25 25 25 Capacitance C (pF) VF = 0, f = 1 mHz Typ. 60 60 60 60 Speed of Response s (ns) Time Constant e-t/s Typ. 13 13 13 13
Part Number HLMADL05 DH05 KL05 KH05
Thermal Resistance RJ-PIN (°C/W) 260 260 290 290
1.0
200
AMBER REDDISH-ORANGE
IF FORWARD CURRENT mA
180 160 140 120 100 80 60 40 20 0 1.0 1.5 2.0 2.5 3.0
RELATIVE INTENSITY
0.5
0 550 594 600 621 630 650 700 WAVELENGTH nm
VF FORWARD VOLTAGE V
Figure 1. Relative Intensity vs. Wavelength.
Figure 2. Forward Current vs. Forward Voltage.
1-51
Others parts begin by hl
HL-1 HL-2 HL-3 HL-4 HL-5 HL-6 HL-7 HL-8 HL-9 HL-10 HL-11 HL-12 HL-13 HL-14 HL-15 HL-16
|
|
|
