|
|
Part: 1A191
Category:
Optoelectronics
-> Display
-> LEDs
Description: High-performance Led ( Test Equipment )
Company: Mitel Networks Corporation
Datasheet: Download 1A191 datasheet File size : 55 kB
Request For quote: Find where to buy 1A191
Datasheet text preview:
PRODUCT INFORMATION PRODUCT
850nm
1A191
High-Performance LED
Test Equipment
T h e strictly defined 850 nm wavelength and high power is ideal for test equipment applications. It is packaged in a hermetically sealed can for high reliability and maximum resistance to harsh operating environments. T h e double-lens optical system results in optimum coupling of power into the fiber.
Optical and Electrical Characteristics
PARAMETER SYMBOL MIN. TYP . MAX. UNIT
(25° C Case Temperature) TEST CONDITION
Fiber-Coupled Power
(Fig. 1, 2,& 3) (Table 1)
Pfiber tr, tf fc
p
100
130 10 35 15
W ns
(Note 1)
IF =100 mA IF =100 mA
Fiber: 50/125 m Graded Index
Rise and Fall Time
(10-90%)
(no bias)
Bandwidth
(3 dBel )
MHz IF =100 mA 860 nm nm 2.2 20 V A pF IF =100 mA IF =100 mA IF =100 mA VR=1V
NA= 0.20
Peak Wavelength Spectral Width (FWHM) Forward Voltage (Fig.5) Reverse Current Capacitance
840
850 50
VF IR C
1.8
250
VR= 0V, f=1 MHz
Note 1: Measured at the exit of 100 meters of fiber.
Absolute Maximum Ratings
PARAMETER SYMBOL LIMIT
Storage Temperature
Ø 4.7 Ø 1.5 0.6
Tstg Top Ptot IF IFRM VR Tsld
-55 to +125 C -55 to +125 C 250 mW 110 mA 180 mA 1.5 V 260 C
Operating Temperature (derating: Fig.4) Electrical Power Dissipation (derating: Fig.4) Continuous Forward Current (f 10 kHz)
3.7
14
Peak Forward Current (duty cycle 50%, f 1 MHz)
0.4
Reverse Voltage Soldering Temperature (2mm from the case for 10 sec)
All dimensions in mm
CASE
CATHODE
ANODE
2.5 5.4 BOTTOM VIEW
Thermal Characteristics
PARAMETER SYMBOL MIN. TYP. MAX. UNIT
The anode is in electrical contact with the case.
Thermal Resistance - Infinite Heat Sink Thermal Resistance - No Heat Sink
Rthjc - 0.4 0.3
100 400
C/W C/W %/ C nm/ C
TO-46 Package With Lens
Rthja Temperature Coefficient - Optical Power dP/dTj d /dTj
Temperature Coefficient -W velength a
11746.11 1994-09-20
Europe: Tel (46 ) 8 58 02 45 00 Fax (46 ) 8 58 02 01 10 Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909 Asia: Tel (65) 293 5312 Fax (65) 293 8527
High-Performance LED
1A191
850nm
Typical Fiber-Coupled Power
Core Diameter/Cladding Diameter Numerical Aperture
RELATIVE FIBER-COUPLED POWER
%
100
FIGURE 1
%
100
FIGURE 2
r z = opt. Øc = 50ʵm
80
RELATIVE FIBER-COUPLED POWER
50/125 m 0.20
62.5/125 m 0.275
100/140 m 0.29
200/230 m 0.37
80
z
130 W
Table 1
300 W
700 W
1100 W
60
60
40
40
r
20
r = opt. Øc = 50ʵm z
20
0 0.5 1.0 1.5 2.0 2.5 3.0 mm
0 0 20 40 60 80 100 µm
z - AXIAL DISPLACEMENT OF FIBER
r - RADIAL DISPLACEMENT OF FIBER
%
100
FIGURE 3
MAX. ELECTRICAL POWER DISSIPATION
mW
300
FIGURE 4
RELATIVE FIBER-COUPLED POWER
80
50% DUTY CYCLE
200
INFINITE HEAT SINK
60
DC
NO HEAT SINK
40
100
20
HEAT SINKED
0 0 40 80 120 160 200 mA
0 0 50 100 150¡C
FORWARD CURRENT
OPERATING TEMPERATURE
mA
200
FIGURE 5
FORWARD CURRENT
100
0 0 1 2 3V
FORWARD VOLTAGE
Clip for SC-2A
R 1.00 3.3000
5.6000 80,000 20.8200
0.5000
10,2500
10.3000
4.9500
0.5000 4.5000
5.0800
3.6450
Clip for Pigtail-3A
10.70 0.50
10.25
10.30
4.95
0.50 4.50 0.85 5.08
3.65
PRODUCT INFORMATION ST 2A Package
Emitter or Detector in ST ® Package
Mitel emitters and detectors can be p r o v i d e d in this low-profile ST ® package. The device is electrically isolated from the ST ® receptacle to facilitate electrical connection. And o p t i m u m fiber-coupled power or r e s p o n s i v i t y is ensured by active alignment against the fiber.
Absolute Maximum Ratings
PARAMETER SYMBOL LIMIT
Operating & Storage Temperature
ST-2A (Note 1)
Tstg , Top
- 40 to +85 C
Note 1: Temperature range can be extended to -55° to +125°C on request.
Thermal Characteristics
PARAMETER SYMBOL MIN. TYP. MAX. UNIT
Thermal Resistance - Infinite Heat Sink
(Note 2)
Rthcc Rthca Rthca 80
40 200
C/W C/W C/W
Thermal Resistance - No Heat Sink
(Note 2)
Thermal Resistance - On PC Board
(Note 2)
Note 2: Add Rthjc for emitter or detector to estimate the total thermal resistance.
2-56 UNC - 2B max.0.5 3/8"-32 UNEF FIBER END
MARKING SIDE SLOT SIDE
0.006
Ø2.502 +0.01 0
12.7
9.5
Ø2.5 +0 -0.004
7.89
7.6 min.12
3.9 5.4 20.1 MATING FERRULE* (not included)
All Dimensions in mm
*The fiber-coupled power/responsivity is guaranteed to meet the LED/PIN data sheet - provided a ferrule meeting this specification is used.
Mechanical Outline of Diode in ST-2A Housing
(ST is a registered trademark of AT&T)
103326 1994-09-20
Europe: Tel (46 ) 8 58 02 45 00 Fax (46 ) 8 58 02 01 10 Tel (44) 1291 436180 Fax (44) 1291 436771
America: Tel 1-800-96MITEL Fax (613) 592-6909 Asia: Tel (65) 293 5312 Fax (65) 293 8527
Others parts begin by 1a
1A-1 1A-2
|
|
|
