|
Details, datasheet, quote on part number:SL311D
| |
| Part: | SL311D |
| Category: | Analog & Mixed-Signal Processing => Comparators |
| Description: | High Performance Voltage Comparators |
| Company: | System Logic Semiconductor |
| Datasheet: | Download SL311D datasheet File size : 21 kB |
| Request For quote: | Find where to buy SL311D
|
| |
Datasheet text preview:
SL311 High Performance Voltage Comparators
LOGIC DIAGRAM
Input polarity is reversed when GND pin is used as an output.
ORDERING INFORMATION SL311N Plastic SL311D SOIC TA = -45°C to 85°C for all packages
PIN ASSIGNMENT
MAXIMUM RATINGS
Symbol VCC + VEE VO - VEE VEE VID VIN PD 1/JA TJ ( m a x ) Tstg Parameter Total Supply Voltage Output to Negative Supply Voltage Ground to Negative Supply Voltage Input Differential Voltage Input Voltage (Note) Voltage at Strobe Pin Power Dissipation and Thermal Characteristics Plastic Dual In-Line Packages Derate above TA =+25°C Operating Junction Temperature Storage Temperature Range Value 36 40 30 ± 30 ± 15 VCC to VCC - 5 625 5.0 +150 -60 to +150 Unit V V V V V V mW mW/°C °C °C
Note: This rating applies for ±15 volt supplies. The positive input voltage limit is 30 volts above the negative supply. The negative input voltage limit is equal to the negative supply voltage or 30 volts below the positive supply, whichever is less.
SLS
System Logic Semiconductor
SL311
RECOMMENDED OPERATING CONDITIONS
Symbol VCC + VEE TA Total Supply Voltage Operating Temperature, All Package Types - 45 Parameter Min Max 30 +85 Unit V °C
ELECTRICAL CHARACTERISTICS (VCC=+15 V, VEE= -15 V, TA =+25°C unless otherwise noted
[Note 1]) Symbol VIO IIO II B Parameter Input Offset Voltage (Note 2) Input Offset Current (Note 2) Input Bias Current Test Conditions RS 50 k, TA = +25°C RS 50 k, -45°C TA 85°C TA = +25°C -45°C TA 85°C TA = +25°C TA = -45°C TA = +85°C 150000 300 TA = +25°C VID -10 mV, IO=50 mA -14.5 1.5 13.0 +7.5 -5.0 ns V V mA mA Guaranteed Limits Min Max 7.5 10 50 100 250 375 500 mV nA nA Unit
AV t DLH VDS VI R ICC IEE NOTES:
Voltage Gain Propagation Delay Time Saturation Voltage Input Voltage Range Positive Supply Current Negative Supply Current
1. Offset voltage, offset current and bias current specifications apply for a supply voltage range from a single 5.0 volt supply up to ±15 volt supplies. 2. The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1.0 mA load. Thus, these parameters define an error band and take into account the "worst case" effects of voltage gain and input impedance.
SLS
System Logic Semiconductor
|
|
