|
Details, datasheet, quote on part number:FIAM1T12
| |
Datasheet text preview:
PRELIMINARY
45
Features
· · · · · · · EMI filtering-Class B Transient protection Low profile mounting options 10 and 20 Ampere versions UL, CSA, EN compliance Mini-size package Inrush current limiting
D a t a Sheet
F I AM
TM
Filter Input Attenuator Module
Shown actual size: 2.28 x 2.2 x 0.5 in 57,9 x 55,9 x 12,7 mm
Product Highlights
The FIAM is a DC front-end module providing transient protection, inrush current limiting and Class B EMI filtering in a Minisize package. The FIAM enables designers using Vicor 2nd Generation, 48Vin DC-DC converters to meet the transient immunity and EMI requirements of Bellcore, FCC, ETSI and European Norms while protecting system hardware from inrush current. The FIAM accepts an input voltage of 36-76Vdc, is available in 10 or 20A versions and provides reverse polarity protection and remote on/off. FIAM is housed in an industry standard "half brick" module measuring 2.28" x 2.2" x 0.5" and depending upon model selected, may be mounted on-board or in-board for height critical applications.
Absolute Maximum Rating
Parameter +In to In +In to In +Out to Out Mounting torque Pin Soldering temperature Pin Soldering temperature Storage temperature C, TGrade Operating temperature CGrade Operating temperature TGrade Rating 80 100 75 5(0.57) 500 (260) 750 (390) -40 to +125 -20 to +100 -40 to +100 Unit Vdc V Vdc in-lbs °F(°C) °F(°C) °C °C °C Notes Continuous 100ms Continuous 6 each, #4-40 or M3 <5 sec; wave solder <7 sec; hand solder Baseplate Baseplate
Specifications
(typical at TBP = 25C, nominal line, 75% load, unless otherwise specified)
Compatible Products
· 2nd Generation 48V Input DC-DC converters
Parameter Min Input voltage 36Vdc Output current FIAM1xxx FIAM2xxx Inrush limiting Transient immunity Bellcore TR-NWT-000499 ETS 300 386-1 Class 2 EMI Bellcore GR-001089-Core EN 55022 FCC Part 15 Dielectric withstand Efficiency Reverse polarity protection ON/OFF control Enable (ON) Disable (OFF) External capacitance FIAM1xxx FIAM2xxx Safety approvals Weight Warranty 96
Typ 48Vdc
Max 76Vdc 10A 20A .014A/µF 200V 200V 250V
Remarks Continuous
1µsec duration 5.0µsec rise time, 50µsec duration surge 1-100nsec burst When used with Vicor 2nd Generation 48Vin DC-DC converters
Part Number Format
FIAM
Product
1C
1
Pin Style 1 = Short 2 = Long
1
Type 1 = 10A 2 = 20A
Product Grade C = 20 to +100 T = 40 to +100
Baseplate 1 = Slotted 2 = Threaded 3 = Thru-hole
Issue 2 Level B Level B 1,500Vrms 2,121Vdc 97.5
Input/Output to Base Input/Output to Base Internal voltage drop is 1.4 max. @ 20A, 100°C baseplate No damage to module, external fuse required 1.0Vdc 5.0Vdc Referenced to Vout. 100k internal pull-up resistor See illustration on page 2. 100V 100V
Thermal Resistance
Parameter Typ Baseplate to sink; flat, greased surface 0.16°C/Watt Baseplate to sink; thermal pad (P/N 20264) 0.1°C/Watt Baseplate to ambient 7.9°C/Watt Baseplate to sink; 1000 LFM 2.2°C/Watt
0.0Vdc 3.5Vdc
10µF 150µF 100µF 330µF UL 1950, CSA 22.2-950, EN 60950 3.1 (88) 4 (113) ounces (grams) 2 years
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
FIAM, Filter Input Attenuator Module
Rev. 1.1
Page 1 of 4
S e t your site on VICOR at www.vicorpower.com
PRELIMINARY
Conducted Noise
Figure 1--FIAM and Model V48A12C500A DC-DC converter.
Figure 2--FIAM and Model V48B24C250A DC-DC converter.
Inrush Limiting
Transient Immunity
Tek Stop: Single Seq. 5.00MS/s [T
Ch1 Zoom:
]
Tek Run: 10.0MS/s
1.0X Vert 0.005X Horz
@ 200.0V
INPUT CURRENT INPUT VOLTAGE
Ch1=Vdc in Ch2=Vdc out Ch3=Idc in @0.2A/mV
© INPUT TRANSIENT
Ch1=Input Ch2=Output
4©
©
OUTPUT VOLTAGE
2©
2©
Ch1 10.0 V Ch2 Ch4 10.0 V 10.0mV M2.00ms Ch1 31.8 V
OUTPUT VOLTAGE
48V offset
Ch1
25.0V
Ch2
25.0V
M5.00µs Ch4
8.2A
Figure 3--Inrush Limiting: Inrush current with 330µF external capacitance.
Figure 4--Transient Immunity: FIAM output response to an input transient.
Transient and Surge Protection
Note: The FIAM is shown in the on state. To disable, open the connection between ON/OFF and Out.
IN
IN EMI GND
OUT ON OFF
IN PR
OUT
TRANSORB P/N
20461-120
+IN
FIAM
NC +IN
NC NC +OUT PC +IN
2nd Generation 48Vdc Input DC-DC Converters
S SC +S +OUT
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
FIAM, Filter Input Attenuator Module
Rev. 1.1
Page 2 of 4
S e t your site on VICOR at www.vicorpower.com
PRELIMINARY
Mechanical Diagram
No. 1 2 3 4 5 6 7 8 9 Converter Pins Function Label +In + No NC Connection Ground EMI/GND In Out ON/OFF ON/OFF No NC Connection No NC Connection +Out +
0.50 ±0.02 12,7 ±0,5
0.23 (REF) 5,8 0.300 ±0.015 7,62 ±0,38
2.20 55,9 1.74 44,2 style 2 & 3 baseplates only (4X)*** 0.12* 0.20** 3,1 5,1
0.01
0.49 12,4
2.000 50,80
0.10 2,5 0.10 X 45° 2,5 CHAMFER
0.300 ±0.015 7,62 ±0,38
1
(ALL MARKINGS THIS SURFACE)
2
3
4 1.900 48,26
0.35 (2X) 8,8 ALUMINUM BASEPLATE 2.28 1.30 57,9 33,0
0.65 16,5
FULL R (6X)
0.130 3,30
(6X)
9
8
7
6
5 Use a 4-40 Screw (6X) Torque to: 5 in-lbs .57 N-m
0.400 10,16 0.700 17,78 1.000 25,40 1.400 35,56
0.150 DIA,(2X) 3,81 0.080 DIA,(7X) 2,03
0.43 10,9
0.06 R (3X) 1,5
0.54 (9X) Pin Style 1 13,7 (Short Pin) 0.62 (9X) Pin Style 2 15,7 (Long Pin)
2.20 55,9 (REF.)
Slotted (Style 1) or Threaded (Style 2)
4-40 UNC-2B (6X)
or Thru Hole (Style 3)
#30 Drill Thru (6X) (0.1285)
* Style 1 baseplate only ** Style 2 & 3 baseplates *** Reser ved for Vicor accessories
PCB Mounting Specifications
INBOARD SOLDER MOUNT PIN STYLE 1 PCB THICKNESS 0.062 ±0.010 1,57 ±0,25 PLATED THRU HOLE DIA 0.158 4,01 (7X) 0.094 ±0.003 2,39 ±0,08 0.164 ±0.003 4,16 ±0,08
ONBOARD SOLDER MOUNT PIN STYLE 2 0.094 ±0.003 2,39 ±0,08 0.164 ±0.003 4,16 ±0,08 ALUMINUM BASEPLATE PINS: TIN/LEAD HOT SOLDER DIPPED
ALL MARKINGS THIS SURFACE
0.06 R (4X) 1,5
1.790 45,47
(2X)
1
2
3
4
1.900* 48.26 ,
1.584* 40,23
9
8
7
6
5
0.400* 10,16 0.700* 17,78 1.000* 25,40 1.400* 35,56 * DENOTES ±0.003 TOL = ±0,08
0.43 10,9
0.53 13,5
0.195 4,95
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
FIAM, Filter Input Attenuator Module
Rev. 1.1
Page 3 of 4
S e t your site on VICOR at www.vicorpower.com
Vicor's comprehensive line of power solutions includes modular, high density DC-DC converters and accessory components, configurable power supplies, and custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. No license is granted by implication or otherwise under any patent or patent rights of Vicor. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor's Terms and Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
Component Solutions for Your Power System
Vicor Corporation 25 Frontage Road Andover, MA, USA 01810 Tel: 800-735-6200 978-470-2900 Fax: 978-475-6715 Email Vicor Express: vicorexp@vicr.com Technical Support: apps@vicr.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
FIAM, Filter Input Attenuator Module
P/N 22502
Rev. 1.1
1/02/10M
S e t your site on VICOR at www.vicorpower.com
|
|
