Details, datasheet, quote on part number: DF19K-8P-1CGND
PartDF19K-8P-1CGND
Category
Description1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable
CompanyHirose Electric
DatasheetDownload DF19K-8P-1CGND datasheet
  

 

Features, Applications

1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.

Drawing of mated connectors DF19K- *P-1H board For connection of cables For connection of FPC For connection of fine coaxial cables

FPC type: Max. 1.7 mm thick Discrete Wire & Coaxial 1.5 mm thick

Each header can connect to three different sockets (cable, FPC, and fine coaxial cable type. (Note: Fine coaxial cable type is under development.)

The three sockets have the same outside dimensions to allow complete Flexibility.
There are headers of the on-board, offset, and reverse offset types to accommodate all designs.
Ground lines can be connected to a metal shell for shielding.
LCDs, notebook personal computers, small OA machines, and small consumer products

Rated current : 0.5A Rating : 0.3A FPC Rated voltage AC100V Item 1.Insulation resistance 2.Voltage proof 3.Contact resistance 4.Insertion-Extraction Force (per Contact) 5.Vibration 6.Damp heat 7.Temperature Cycling 8.Mechanical operation 9.Resistance to soldering heat 500MW or more No flashover or breakdown 30mW or less (50mW or less for FPC)

Operating temperature range Operating humidity range
Specification

Conditions Measure 300 V AC, applied for one minute. Measure at 100 mA. Measure with a steel pin with thickness of 0.20.005. Frequency: to 55 Hz, amplitude in 3 directions, 2h Temperature of 402C, humidity to 95%, duration (-55-C: 30 min 35-C: 10 min 85-C: 30 min 35-C: 10 min ) 5 cycles 50 mechanical-operation cycles Reflow: At the recommended temperature profile, manual soldering: iron temperature 300-C for 3s

No electrical discontinuity for 1s or more Contact resistance: specified value or less, insulation resistance: 500MW or more Contact resistance: specified value or less, insulation resistance: 500MW or more Contact resistance: specified value or less No melting of resin portion, which affects performance

Note1: Includes the temperature rise due to current flow. Note2: The term storage refers to unused products prior to PCB mounting that is being stored for long periods. The operating temperature and humidity range are applicable to connectors not carrying current. After PCB assembly or temporary storage during transportation. Note3: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.

Product Pin header Part Insulation Terminal Ground Plate Socket Crimp-Contact FPC socket Ground plate for FPC Socket for fine coaxial cables Ground plate for fine coaxial cables Note1: Tinning is Whisker free Insulation Ground Plate Terminal Insulation Terminal Ground Plate Insulation Terminal Ground Plate Ground Plate Material Polyamide resin Phosphor bronze Phosphor bronze Polyamide resin Stainless steel Phosphor bronze Polyamide resin Phosphor bronze Stainless steel LCP resin Phosphor bronze Phosphor bronze Phosphor bronze Color / Finish Grey Selective Gold Plating Tin Plated Grey Tin Plated Gold Plated Grey Selective Gold Plating Tin Plated Grey Selective Gold Plating Tin Plated Tin Plated UL standard UL94V-0 ------------------UL94V-0

The type name DF19 represents a specific product specification. To order a product, specify the type from pages to 9.

Series Name DF 2 Series No. 19 3 Profile : sPin header G : On-board type (1.65 mm from the board) K : Offset type (1.0 mm from the board) L : Offset type (1.1 mm from the board) KR : Reverse offset type (1.0 mm from the board) sCrimp socket None : Without grounding shell G : With grounding shell (protected for EMI) sFPC socket G : Specification for connection with ground shell sGround plate for FPC G : Specification for connection with ground shell sSocket for coaxial fine cables G : Specification for connection with ground shell sGround plate for fine coaxial cables G : Specification for connection with ground shell 4 Number of contacts : 8,14,20,30... (Note 1) 5 Connector type S : Single row socket P : Single row pin header 6 Contact pitch 1mm 7 Wiring type / terminal profile H : Right angle SMT C : Crimp socket F : FPC socket SD : Socket for fine coaxial cables 8 Part for installation GND : Ground plate (Note 2)

(Note 1) Be careful, as the number of contacts differ depending on the profile. (Note 2) The FPC and coaxial fine cable types always use a ground plate.

Symbol AWG#30~32 2 Type SCF : Socket contact reel Packaging 3 Plating A : Gold plating 4 Specification None 10 000 pieces per reel pieces per reel


 

Related products with the same datasheet
DF19K-14P-1CGND
DF19K-14P-1F
DF19K-14P-1FGND
DF19K-14P-1H
DF19K-14P-1HGND
DF19K-14P-1SD
DF19K-14P-1SDGND
DF19K-14S-1C
DF19K-14S-1CGND
DF19K-14S-1F
DF19K-14S-1FGND
DF19K-14S-1H
Some Part number from the same manufacture Hirose Electric
DF19K-8P-1F 1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable
FH23-51S-0.3SHAW 0.3mm Contact Pitch, 1.25mm Above the Board, Flexible Printed Circuit Connectors
MDF6-2022SC 3.5mm Pitch Miniature Double Row Connector for Secondary Power (product Compliant to Ul/csa Standard)
HD-3200M3-BH 3 dB 90 Card Couplers
MSS-L-1.5 Rfco-axial Connectors
HV-TMP DC to 65 GHz HV Coaxial Connector Plug Terminations
DF7-2022PC 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (ul,c-ul and TUV Listed)
FH26-51S-0.3SHW 0.3mm Contact Pitch, 1mm Above the Board, Flexible Printed Circuit ZIF Connectors
FDC-25PF FD TYPE Connector FOR Ribbon Cable
DF3-7EP-2A 2mm Pitch Connector for Discrete Wire Connection(product Approved by UL CSA Standard)
IC11S-68PL-1.27SF-EJL Single Slot SMT Connectors For Card-bus Based PC Cards
DF19-2830SCFA 1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable
AT-902 Stripline Mounting Fixed Attenuators (DC to 8 GHz)
FX6A-40P-0.8SV 0.8mm Pitch Stacking Height 5 to 9mm Connector
PCN21B-110PA-2PF 2mm Hard Metric Connector

DX31A-20SW-CR2A : DX Series High-density I/O Connectors

DF7-5P-3.96C : 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (ul,c-ul and TUV Listed)

MC-301RC : Coil Components (relay Headers)

QM-26-PR : QM (1.78mm-070) Connectors

DF3-7EP-2V : 2mm Pitch Connector for Discrete Wire Connection(product Approved by UL CSA Standard)

H/MSA3106B18-10SX-G : MS type Lower Profile Plug(circular Connector Conforming to Mil-c-5015)

FX15S-41S-0.5SH : Gold Surface Mount, Right Angle Rectangular - Headers, Receptacles, Female Socket Connectors, Interconnect Receptacle; CONN RCPT 41POS 1MM R/A SMD Specifications: Color: Black ; Connector Type: Receptacle ; Contact Finish: Gold ; Features: - ; Mounting Type: Surface Mount, Right Angle ; Number of Positions Loaded: All ; Number of Rows: 2 ; Pitch: 0.039" (1.00mm) ; Row Spacing: - ; Packaging: Digi-Reel ; Fastening Type: - ; Termination: Solder

FX2CA-32S-1.27DSAL(71) : 1.27mm Pitch Multi-function Two Piece Connector

 
0-C     D-L     M-R     S-Z