|Description||1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable|
|Datasheet||Download DF19K-8S-1HGND datasheet
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.
Drawing of mated connectors DF19K- *P-1H board For connection of cables For connection of FPC For connection of fine coaxial cablesFPC type: Max. 1.7 mm thick Discrete Wire & Coaxial 1.5 mm thick
Each header can connect to three different sockets (cable, FPC, and fine coaxial cable type. (Note: Fine coaxial cable type is under development.)The three sockets have the same outside dimensions to allow complete Flexibility.
There are headers of the on-board, offset, and reverse offset types to accommodate all designs.
Ground lines can be connected to a metal shell for shielding.
LCDs, notebook personal computers, small OA machines, and small consumer products
Rated current : 0.5A Rating : 0.3A FPC Rated voltage AC100V Item 1.Insulation resistance 2.Voltage proof 3.Contact resistance 4.Insertion-Extraction Force (per Contact) 5.Vibration 6.Damp heat 7.Temperature Cycling 8.Mechanical operation 9.Resistance to soldering heat 500MW or more No flashover or breakdown 30mW or less (50mW or less for FPC)Operating temperature range Operating humidity range
Conditions Measure 300 V AC, applied for one minute. Measure at 100 mA. Measure with a steel pin with thickness of 0.2±0.005. Frequency: to 55 Hz, amplitude in 3 directions, 2h Temperature of 40±2C, humidity to 95%, duration (-55-C: 30 min 35-C: 10 min 85-C: 30 min 35-C: 10 min ) 5 cycles 50 mechanical-operation cycles Reflow: At the recommended temperature profile, manual soldering: iron temperature 300-C for 3s
No electrical discontinuity for 1µs or more Contact resistance: specified value or less, insulation resistance: 500MW or more Contact resistance: specified value or less, insulation resistance: 500MW or more Contact resistance: specified value or less No melting of resin portion, which affects performance
Note1: Includes the temperature rise due to current flow. Note2: The term storage refers to unused products prior to PCB mounting that is being stored for long periods. The operating temperature and humidity range are applicable to connectors not carrying current. After PCB assembly or temporary storage during transportation. Note3: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
Product Pin header Part Insulation Terminal Ground Plate Socket Crimp-Contact FPC socket Ground plate for FPC Socket for fine coaxial cables Ground plate for fine coaxial cables Note1: Tinning is Whisker free Insulation Ground Plate Terminal Insulation Terminal Ground Plate Insulation Terminal Ground Plate Ground Plate Material Polyamide resin Phosphor bronze Phosphor bronze Polyamide resin Stainless steel Phosphor bronze Polyamide resin Phosphor bronze Stainless steel LCP resin Phosphor bronze Phosphor bronze Phosphor bronze Color / Finish Grey Selective Gold Plating Tin Plated Grey Tin Plated Gold Plated Grey Selective Gold Plating Tin Plated Grey Selective Gold Plating Tin Plated Tin Plated UL standard UL94V-0 ------------------UL94V-0
The type name DF19 represents a specific product specification. To order a product, specify the type from pages to 9.
Series Name DF 2 Series No. 19 3 Profile : sPin header G : On-board type (1.65 mm from the board) K : Offset type (1.0 mm from the board) L : Offset type (1.1 mm from the board) KR : Reverse offset type (1.0 mm from the board) sCrimp socket None : Without grounding shell G : With grounding shell (protected for EMI) sFPC socket G : Specification for connection with ground shell sGround plate for FPC G : Specification for connection with ground shell sSocket for coaxial fine cables G : Specification for connection with ground shell sGround plate for fine coaxial cables G : Specification for connection with ground shell 4 Number of contacts : 8,14,20,30... (Note 1) 5 Connector type S : Single row socket P : Single row pin header 6 Contact pitch 1mm 7 Wiring type / terminal profile H : Right angle SMT C : Crimp socket F : FPC socket SD : Socket for fine coaxial cables 8 Part for installation GND : Ground plate (Note 2)
(Note 1) Be careful, as the number of contacts differ depending on the profile. (Note 2) The FPC and coaxial fine cable types always use a ground plate.
Symbol AWG#30~32 2 Type SCF : Socket contact reel Packaging 3 Plating A : Gold plating 4 Specification None 10 000 pieces per reel pieces per reel
|Related products with the same datasheet|
|Some Part number from the same manufacture Hirose Electric|
|DF19K-8S-1SD 1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable|
|FH23-51S-0.3SHAW 0.3mm Contact Pitch, 1.25mm Above the Board, Flexible Printed Circuit Connectors|
|MDF6-2022SC 3.5mm Pitch Miniature Double Row Connector for Secondary Power (product Compliant to Ul/csa Standard)|
|HD-3200M3-BH 3 dB 90¡Æ Card Couplers|
|MSS-L-1.5 Rfco-axial Connectors|
|HV-TMP DC to 65 GHz HV Coaxial Connector Plug Terminations|
|DF7-2022PC 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (ul,c-ul and TUV Listed)|
|FH26-51S-0.3SHW 0.3mm Contact Pitch, 1mm Above the Board, Flexible Printed Circuit ZIF Connectors|
|FDC-25PF FD TYPE Connector FOR Ribbon Cable|
|DF3-7EP-2A 2mm Pitch Connector for Discrete Wire Connection(product Approved by UL CSA Standard)|
|IC11S-68PL-1.27SF-EJL Single Slot SMT Connectors For Card-bus Based PC Cards|
|DF19-2830SCFA 1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable|
|AT-902 Stripline Mounting Fixed Attenuators (DC to 8 GHz)|
|FX6A-40P-0.8SV 0.8mm Pitch Stacking Height 5 to 9mm Connector|
|PCN21B-110PA-2PF 2mm Hard Metric Connector|
DX20AJ-100P-CR2A : DX Series High-density I/O Connectors
DX33A-60SE-LNA : DX Series High-density I/O Connectors
RM31BWRA-15P : RM Series Shell SIZE 12-31mm Circular Connectors
HA216PN-3PH-A : Audio Connectors-models
DF19G-8S-1SD : 1 Mm-pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable
DX30J-132SE : DX Series High-density I/O Connectors
FX1-216P-1.27DSAL : 1.27mm Pitch Connector
SW-1634BA-CC : Sumicon 1600 Series Rectangular Connectors
SW-1634DA-CH02 : Sumicon 1600 Series Rectangular Connectors
H2AXG-10112-A8-ND : Jumpers, Pre-crimped Wire Cable Assembly 12.0" (304.8mm); JUMPER-H1503TR/A3048A/X 12" Specifications: Contact Finish: Gold ; Color: Orange ; Length: 12.0" (304.8mm) ; Wire Gauge: 28 AWG ; Contact End: Pin to Cable (Round) ; Number of Rows: 1 ; Number of Conductors: 1 ; Contact Finish Thickness: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
MF11BMT-WP01/CR-MP : Hand Tools Applicator Crimp tool Hirose Electric MF11BMT Series Connectors feature waterproof metal shells with a bayonet lock offering easy and secure installation and removal. These connectors are IP67 waterproof compliant. The plug and receptacle can be cleaned with MPO cleaner. The MF11BMT Series have a robust metal shell that