features· Silver element· Anti-leaching nickel barrier terminations· Meets or exceeds EIA 575, EIAJ RC 2690A, EIA PDP-100, MIL-R-55342F· Marking: White "000" on black protective coat 1F black with no marking 1H and 1E sizes are green with no marking 1J has white "0" marking· Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption of EU directive 2005/95/EC dimensions and construction
W Solder Plating t d Protective Coating Resistive Inner Film Electrode Ni Plating
TBL: 01005 only: 2mm pitch pressed paper TA: 0201 only: 1mm pitch pressed paper TC: 0201 only: 7" 2mm pitch pressed paper (TC: 10,000 pcs/reel, TCM: 15,000 pcs/reel) TCD: 0201 only: 10" 2mm pitch punched paper TPL: 0402 only: 2mm pitch punch paper TP: 2mm pitch punch paper TD: 2mm pitch punched paper TDD: paper tape TE: punched plastic TED: punched plastic For further information on packaging, please refer to Appendix A
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA Speer Electronics, Inc.· 199 Bolivar Drive· Bradford, PA 16701· USA· 814-362-5536· Fax: 814-362-8883· www.koaspeer.com
zero ohm jumper chip resistor applications and ratings
Maximum Continuous Current 70°C 0.5 Amps 0.5 Amps 1.0 Amps 2.0 Amps 2.0 Amps
Maximum Surge Current 70°C 1.0 Amp Max. for < 1 second 1.0 Amp Max. for < 1 second 2 Amp Max. for < 1 second 5 Amp Max. for < 1 second 10 Amp Max. for < 1 second
For resistors operated at an ambient temperature 70°C or above, a current rating shall be derated in accordance with the above derating curve.
Parameter Resistance Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70°C High Temperature Exposure Requirement R Limit Typical 50m Max. 15m Max. after the test after the test 50m Max. 18m Max. after the test after the test 50m Max. 15m Max. after the test after the test 50m Max. 15m Max. after the test after the test 100m Max. 18m Max. after the test after the test 100m Max. 18m Max. after the test after the test 50m Max. 15m Max. after the test after the test Test Method 25°C Maximum surge current for 5 seconds 5°C, 10 seconds ± 1 second -55°C (30 minutes), +125°C (30 minutes), 100 cycles 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle +125°C, 1000 hours: +155°C, 1000 hours: W2H, W3A