Details, datasheet, quote on part number: TDA7460
PartTDA7460
Category
Description
CompanyN.A.
DatasheetDownload TDA7460 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

DEVICE INCLUDES AUDIO PROCESSOR, STEREO DECODER, NOISEBLANKER AND HIGHCUT FUNCTIONS. HIGH PERFORMANCE SIGNAL PROCESSOR NO EXTERNAL COMPONENTS REQUIRED FULLY PROGRAMMABLE VIA I2C BUS LOW DISTORTION LOW NOISE DESCRIPTION The is a high performance signal processor specifically designed for car radio applications. The device includes a complete audioprocessor and a stereo decoder with noiseblanker, stereoblend and all signal processing functions necessary for state-of-the-art as well as future car radio systems. Switching-capacitors design technique allows to obtain all these features without external compoBLOCK DIAGRAM

nents or adjustments. This means that higher quality and reliability walks alongside an overall cost saving. The CSP is fully programmable by I2C bus interface allowing to customize key device parameters and especially filter characteristics. The BICMOS process combined with the optimized signal processing assure low noise and low distortion performances.

CASS R CASS L PHONE (MPIN) PHONE GND (MPOUT)

This is preliminary information on a new product now in development. Details are subject to change without notice.

Symbol VS Tamb Tstg Operating Supply Voltage Operating Ambient Temperature Range Operating Storage Temperature Range Parameter Value to 150 Unit V C

Symbol VS IS SVRR Parameter Supply Voltage Supply Current Ripple Rejection = 9V Audioprocessor (all filters flat) Stereodecoder + Audioprocessor Test Condition Min. 7.5 Typ. Max. 10 Unit mA dB

CASS R CASS L CDR CDGND CDL PHGND (MPOUT) PHONE (MPIN) AM MPX LEVEL
Symbol Rth j-pins Parameter Thermal Resistance Junction-pins Max Value 85 Unit C/W

AUDIO PROCESSOR PART Input Multiplexer Fully differential or quasi-differential CD Stereo input Cassette stereo input AM mono or stereo input Phone differential or single ended input Internal beep with 2 frequencies (selectable) Mixable phone and beep signals Loudness Second order frequency response Programmable center frequency and quality factor Selectable flat-mode (constant attenuation) Volume control 1dB attenuator Max. gain 20dB Max. attenuation 79dB Soft-step gain control

Bass Control 2nd order frequency response Center frequency programmable in 4(5) steps DC gain programmable x 2dB steps Treble Control 2nd order frequency response Center frequency programmable in 4 steps x 2dB steps Speaker Control 4 independent speaker controls (1dB steps with 50dB control range) Mute Functions Direct mute Digitally controlled softmute with 4 programmable time constants

ELECTRICAL CHARACTERISTICS (VS = 9V; Tamb = 10K; all gains = 1KHz; unless otherwise specified).
Symbol Parameter Test Condition Min. Typ. Max. Unit K VRMS dB V

R in VCL SIN GIN MIN GIN MAX GSTEP VDC Input Resistance Clipping Level Input Separation Min. Input Gain Max. Input Gain Step Resolution DC Steps Adjacent Gain Step GMIN to GMAX 80 -1 All inputs except Phone

R in CMRR GIN MAX Input Resistance Common Mode Rejection Ratio Max. Input Gain Differential mode Common Mode VCM @ 1KHz VCM to 20KHz flat; all stages 0dB

R in CMRR Input Resistance Common Mode Rejection Ratio Differential Common Mode VCM @ 1KHz VCM K dB

 

Some Part number from the same manufacture
TDA8005AG
TDA8011
TDA8040
TDA8041
TDA8042
TDA8043K
TDA8060
TDA8114
TDA8134
TDA8147
TDA8174A-AW
TDA8198
TDA8204
TDA8214
TDA8215
TDA8304
TDA8315
TDA8341/N6 Ic-if Amp/demodulator
TDA8363
TDA8442
TDA8446
 
0-C     D-L     M-R     S-Z